How to Kick-Start a Motorcycle?

Why doesn't the fuel gauge display after refueling?

The abnormal display of the car fuel gauge is usually caused by a malfunction of the fuel float (fuel level sensor). The fuel gauge detects the fuel level through the float, and if the detection signal is distorted, such problems may occur. Some fuel level displays are controlled by the car's computer, and if the computer signal malfunctions, inaccurate display may also occur, although this probability is very low. Additional information: 1. Inside the car fuel tank, a float is connected to a metal rod, operating on the same basic principle as the float in a household toilet water tank. When the water level drops, the position of the float also decreases, which in turn drives a linkage to open the water inlet valve, allowing water to flow in. As the water level rises, the float position also rises, and once it reaches a certain level, the linkage will close the water inlet valve. 2. The measurement unit of the fuel gauge also employs this simple, straightforward, and practical method. However, the end of the metal rod connected to the float is linked to a variable resistor via a movable contact. The position of the float on the fuel surface in the tank, whether high or low, changes the position of the wiper on the variable resistor via the metal rod. This variable resistor is then connected to the car's fuel gauge, and the movement of the gauge pointer is controlled by the amount of current passing through the variable resistor.

6

4

Share

What are the symptoms of a faulty DSG flywheel?

For models equipped with a DSG transmission, when the flywheel is damaged, abnormal noises will occur during driving. When starting the engine, you may hear gear impact sounds, or even failure to engage, preventing startup. Symptoms such as slipping or idling may also occur during startup. Additional information: 1. A damaged flywheel in a car's transmission is usually caused by clutch slipping and overheating. The flywheel in the transmission can fail or crack, and the cracking of the clutch housing can be caused by various factors: imbalance in the crankshaft, flywheel, or clutch assembly; imbalance in the driveshaft; failure of the connection between the flywheel and the engine block. Looseness in the first or second shaft rear bearings of the transmission can lead to imbalance in the transmission's operation. 2. The DSG consists of a dual-clutch assembly formed by two sets of clutch plates, available in wet and dry types. It also features a dual-transmission shaft mechanism composed of a solid shaft and its outer sleeve. The operation of both clutches and gear sets is controlled by a Mechatronic electronic and hydraulic system. The DSG offers faster and smoother gear shifts than manual transmissions, with uninterrupted power output. Compared to traditional automatic transmissions, the DSG automatic transmission is distinctly different, as it does not use a torque converter, allowing for more flexible automatic shifting.

5

4

Share

Why is it difficult to shift into first gear?

The reason why it is difficult to shift into first gear is due to lack of maintenance of the shifting mechanism or excessive wear of the gear lever ball seat. The details are as follows: Lack of maintenance of the shifting mechanism: The shifting mechanism is a frequently used component, so its wear level is relatively high. When the shifting mechanism lacks lubrication, the operation becomes abnormally stiff. Excessive wear of the gear lever ball seat: The ball pin seat of this vehicle has been completely worn out. Since the ball pin seat is absent, the gear lever ball pin moves upward under the action of the conical spring, maintaining contact with the shell hole, with its ball head plane protruding about 3-4mm above the shell hole plane. Due to the forward and backward movement distance generated when shifting into first gear or reverse gear without using a synchronizer. Therefore, when shifting into first gear or reverse gear, the lower end of the gear lever cannot push the sliding gear into place and disengages from above the groove of the first gear and reverse gear shift fork shaft movement block, preventing the first gear and reverse gear shift fork shaft from entering the correct position for shifting. As a result, first gear and reverse gear cannot be engaged.

4

3

Share

What are the precautions for the first car maintenance?

New car owners should pay attention to the following points for the first maintenance: 1. Pay attention to the maintenance time: When purchasing the car, the 4S store staff will inform the owner of the first maintenance time and mileage. If the first maintenance time is approaching, the 4S store staff will also notify in advance. The vehicle comes with a maintenance manual, which also indicates the first maintenance time and mileage. Owners can follow the information provided for the first maintenance. 2. Required first maintenance items: The first maintenance includes changing the engine oil and oil filter, and conducting a comprehensive inspection of the car. 3. Pay attention to the oil used in the first maintenance: Since the vehicle is in the running-in period, the parts are not fully worn in, and impurities may appear during use, affecting the performance of the oil. It is necessary to change the oil in time during the first maintenance to avoid a decline in oil performance. 4. Pay attention to pre-checking any existing problems before the first maintenance: The first maintenance is not just about changing the oil but also involves checking the various performance aspects of the car. Before the first maintenance, the owner needs to evaluate the car, noting any abnormalities or other issues encountered during use, and keep a record to resolve them promptly during the first maintenance.

2

3

Share

What Causes an Automatic Transmission to Not Move When in Gear?

Automatic transmission not moving when in gear is caused by leakage in the automatic transmission oil pan, looseness in the linkage or cable between the manual valve operating handle and the rocker arm, or blockage in the oil pump intake filter screen. Leakage in the automatic transmission oil pan: If only a small amount of hydraulic oil flows from the pressure test hole of the main oil circuit, and the oil pressure is very low or almost nonexistent, it indicates leakage in the automatic transmission oil pan, causing the vehicle not to move. Open the oil pan and check if the oil pump intake filter screen is blocked. If there is no blockage, it means the oil pump is damaged or there is severe leakage in the main oil circuit, and the automatic transmission should be disassembled. Looseness in the linkage or cable between the manual valve operating handle and the rocker arm: If the linkage or cable between the manual valve operating handle and the rocker arm is loose, the manual valve remains in the neutral or parking position. If it is loose, reassemble it and readjust the position of the operating lever. Blockage in the oil pump intake filter screen: If there is some oil pressure in the main oil circuit when starting the cold engine, but the oil pressure drops significantly after the engine warms up, it indicates excessive wear in the oil pump, which should be replaced.

2

5

Share

What to do if the car inspection is overdue by one month?

If the car inspection is overdue by one month, you need to promptly go to the vehicle management office for a re-inspection. However, please note: Whether the inspection is overdue by one month or one day, it means the vehicle is no longer qualified to be driven on the road. Once you find that the vehicle inspection is overdue, you should immediately go for a supplementary inspection. Penalties related to overdue car inspections: Within three months: If the car inspection is overdue within three months, you can directly apply for a supplementary inspection. You will receive a verbal warning without a fine. Over three months but less than two years: If the car inspection is overdue for more than three months but less than two years, you will need to pay a fine ranging from 50 to 200 yuan, and 3 points will be deducted from your license. Over two years: If the car has not been inspected for more than two years, the vehicle's record will be canceled, and generally, a fine must be paid to restore it. Driving without timely participation in the annual inspection is considered illegal driving, and the vehicle may be impounded. If a car fails to obtain the motor vehicle inspection qualification mark for three consecutive inspection cycles, it will be forcibly scrapped.

2

3

Share

How to Kick-Start a Motorcycle?

Why doesn't the fuel gauge display after refueling?

What are the symptoms of a faulty DSG flywheel?

Why is it difficult to shift into first gear?

What are the precautions for the first car maintenance?

What Causes an Automatic Transmission to Not Move When in Gear?

What to do if the car inspection is overdue by one month?

What to Do When Vehicle Tire Pressure is Too Low?

What does MAX A/C mean in a car?

What is the Appropriate Gauge for Jumper Cables?

What to Do When the Brakes Suddenly Fail?