How to Keep Warm Inside the Car in Winter?

What Causes the Car Brake System Warning Light to Illuminate?

Here are the main reasons why the car brake system warning light may illuminate: 1. Malfunction in the brake system. This can lead to poor or failed braking, unilateral braking deviation, braking noise, brake drag causing brake drum overheating, or parking brake failure. 2. Low brake fluid level. This affects braking performance and driving safety, and the vehicle should be taken to a repair shop as soon as possible. 3. The handbrake is not released or not fully released. The handbrake should be checked promptly. 4. ABS (Anti-lock Braking System) failure. During emergency braking, the ABS adjusts the pressure in the brake lines based on wheel speed to keep the wheels in a state of intermittent locking and rolling, preventing dangerous situations.

15

0

Share

Maximum 4000 RPM When Revving in Neutral

When in neutral, the engine has a protection program that limits the engine speed. Therefore, when revving in neutral, the engine speed generally does not exceed 4000 RPM. Below are some precautions during car driving: 1. Avoid aggressively revving the engine in neutral, as this can cause certain damage to the engine. 2. When the engine has just started, it has not yet reached normal operating temperature, and the oil film has not fully covered the components. Aggressively revving the throttle at this time can lead to abnormal wear on the engine. 3. Even if the engine has reached normal operating temperature, aggressively revving in neutral can still cause damage. This is because the engine load is low in neutral, and sudden throttle input can cause the RPM to rise too quickly. This results in an instant increase in pressure on internal components, and lubrication for friction pairs may not keep up with the rapid RPM increase. 4. When starting the engine, do not aggressively rev the throttle to warm it up quickly. Instead, engage a gear and drive immediately after starting.

8

1

Share

Why Does a New Car's Brake Make Abnormal Noises?

Here are the main reasons why a new car's brake makes abnormal noises: 1. Generally, abnormal noises occur when the brake pads wear thin. You should check if the brake pads are severely worn. 2. The abnormal noise in a new car's brake might be caused by different materials of the brake pads. It is advisable to visit a car repair shop promptly to identify the specific cause of the noise. 3. Since the brake pads of a new car need to be broken in, abnormal noises may occur during this process, which is normal. The noise will disappear after driving a few hundred kilometers. 4. In windy weather conditions, dust from the air may enter the brake pads, which can also cause abnormal noises. In this case, pressing the brake firmly several times can help eliminate the noise.

9

4

Share

Reasons for Fuel Pump Failure

Here are the main reasons for fuel pump damage: 1. Poor fuel quality: When the fuel quality is poor, the fuel tank may contain various impurities or foreign objects. Although the fuel pump has a filter screen to filter the gasoline, it can only block large particles. Small particles are sucked into the fuel pump motor, which can cause damage over time. 2. Delayed refueling: Waiting until the fuel light comes on to refuel can cause the fuel pump to operate at a low fuel level, leading to insufficient cooling and lubrication. This can result in the pump motor overheating and stopping. 3. Long-term neglect of fuel filter replacement: Severe blockage in the fuel filter supply system can make it difficult for the fuel pump to pump fuel, causing it to operate under high load for extended periods, leading to damage. Here are the main symptoms of fuel pump failure: 1. Weak acceleration and a jerky feeling when accelerating suddenly. 2. Difficulty starting the engine, requiring prolonged key turning. 3. Unusual noises, such as a buzzing sound while driving. 4. The engine malfunction indicator light turns on. 5. Engine vibration.

9

4

Share

How many meters apart are the white semicircular distance confirmation markings?

White semicircular distance confirmation markings are installed every 50 meters on both sides of road sections with complex meteorological conditions that affect driving safety, serving as a reference for drivers to maintain a safe following distance. Below are three types of distance confirmation markings: White zigzag distance confirmation markings: These markings have a total width of 300cm with line widths of 40cm or 45cm. Starting from the 0m reference point, they are placed every 5 meters in pairs, with a 50m interval between groups. Five sets are typically installed, though more may be arranged based on site conditions. White semicircular distance confirmation markings: These semicircular markings have a radius of 30cm and are spaced 50m apart, usually installed consecutively along certain road sections. White rectangular distance confirmation markings (expressway distance confirmation markings): Used in conjunction with distance confirmation signs, these are installed on sections prone to overtaking, accidents, or other hazardous conditions. When encountering these markings, drivers should maintain a safe distance from the vehicle ahead to prevent traffic accidents.

16

0

Share

Can Engine Oils Be Mixed?

Engine oils should not be mixed. Different types of oils contain different chemical substances, and mixing them may lead to accidents, posing significant safety hazards. It is advisable to avoid mixing oils whenever possible. Here are some precautions regarding adding engine oil to your car: 1. Pay attention to the timing of oil changes for your car. Under normal driving conditions for a new car, if synthetic oil is used, the oil can generally be changed every 10,000 kilometers, and in some cases, it can even be extended to 20,000 kilometers. 2. Choose the right engine oil. It is recommended to opt for multi-grade oils as they are economical, long-lasting, and efficient, providing better protection for the engine. If the engine is in good condition and the seasonal temperature is low, it is advisable to use oil with lower viscosity to ensure smooth oil flow. 3. The oil level should be slightly below the mark on the dipstick and not overfilled. Never let the oil level fall below the minimum mark, but adding too much oil, exceeding the upper limit on the dipstick, will increase the crankshaft's rotational resistance, reduce the engine's output power, and cause excess oil to enter the combustion chamber, leading to oil burning, blue smoke emission, and increased fuel consumption.

8

4

Share

How to Keep Warm Inside the Car in Winter?

What Causes the Car Brake System Warning Light to Illuminate?

Maximum 4000 RPM When Revving in Neutral

Why Does a New Car's Brake Make Abnormal Noises?

Reasons for Fuel Pump Failure

How many meters apart are the white semicircular distance confirmation markings?

Can Engine Oils Be Mixed?

How to set up one-touch window control for Audi Q7?

How to reset the maintenance light on the Great Wall H4?

What Causes the Car Warning Light to Illuminate?

How to Adjust the Windshield Washer Nozzle on a Mondeo?