How to Keep the Wiper Blades Running Continuously?

How to Start a Toyota Corolla?

Toyota Corolla's scientific starting procedure mainly consists of the following steps: 1. Turn the ignition key to the second position, to the power-on position. 2. Press the foot brake and shift the gear from P to N (if reversing, start the engine directly in P gear). 3. Release the foot brake and turn the ignition key to the starting position to start the engine (the warm-up time depends on different models and ambient temperatures, but avoid sudden acceleration and braking in low-temperature conditions). 4. Press the foot brake, release the handbrake, and shift the gear from N to D (if starting on a slope, to prevent rolling back, you can first shift from N to D, lightly press the accelerator, and slowly release the handbrake for a smooth start). 5. Slowly release the foot brake to start moving. 6. Then, according to road conditions, steadily press the accelerator to increase speed and drive safely.

5

4

Share

Is the Buick GL8 Transmission Made by Aisin?

"The transmission brand used in the Buick GL8 is Aisin. Established in 1969, Aisin is a world-renowned professional developer and manufacturer of automotive automatic transmissions. In the field of automotive automatic transmissions, Aisin's products hold the world's highest market share. The Buick GL8 is equipped with an Aisin 6AT automatic manual transmission. The automatic manual transmission is essentially a traditional AT or CVT transmission with added manual shifting functionality. The purpose of the automatic manual transmission is to enhance the driving pleasure of automatic vehicles. When using the Buick GL8's transmission in daily driving, the following points should be noted: Do not delay transmission oil changes for extended periods. Prolonged failure to change the transmission oil can lead to damage to internal components such as bearings and the casing. Avoid prolonged coasting in neutral. While driving manual transmission vehicles, many experienced drivers may coast in neutral, but for automatic transmission vehicles, coasting in neutral can cause the transmission to overheat and produce a noticeable jolt when shifting back into Drive (D) mode. Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Many drivers, in an attempt to demonstrate smooth operation, shift into reverse while the vehicle is still moving, which can severely damage the transmission gears and, over time, lead to gear grinding and other failures. Avoid frequently climbing steep slopes in Drive (D) mode. When facing steep slopes, automatic transmission vehicles may overheat due to high load or shift prematurely, resulting in insufficient power for climbing. In such cases, using manual mode to limit lower gears or switching to sport mode can help protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, it should be transported using a flatbed tow truck with the transmission in Neutral (N). Towing the vehicle directly with a tow rope or similar method should be avoided."

5

1

Share

What are the reasons for high idle speed in the Excelle?

The reasons for high idle speed in the Excelle are: 1. The throttle does not match the required model of the car; 2. The engine oil has not been replaced for a long time; 3. There is an air leak in the car's intake pipe, or the vacuum tube is detached, damaged, or the intake pipe is damaged; 4. There is a leak in the car's fuel injector, causing excessive fuel supply. Taking the 2021 Excelle as an example, it belongs to the compact car category, with body dimensions of: length 4609mm, width 1798mm, height 1464mm, wheelbase 2640mm, fuel tank capacity 44l, and curb weight 1270kg. The 2021 Excelle has a front suspension of MacPherson independent suspension and a rear suspension of multi-link independent suspension. It is equipped with a 1.5L naturally aspirated engine, with a maximum horsepower of 113ps, maximum power of 83kw, maximum torque of 141nm, and is paired with a 6-speed automatic transmission.

20

5

Share

What is the battery model for the Tiguan?

The original battery for the Tiguan is a Varta, model number 6-QW-60(580)-L. We need to pay attention to the following points: 1. Avoid parking the car in an open-air parking lot for a long time. If it must be parked for an extended period, remove the battery to prevent it from freezing and getting damaged. 2. Each engine start should not exceed 5 seconds, with a minimum interval of 15 seconds between attempts. If the engine fails to start after multiple attempts, check other aspects such as the electrical circuit, ignition coil, or fuel system. Avoid continuous attempts to start the engine, as this can cause the battery to over-discharge and burn out. 3. Charge the battery regularly. If the battery is left unused for a long time, it will slowly self-discharge and eventually become unusable. Therefore, start the car periodically to recharge the battery. 4. Regularly inspect the battery's accessories and connecting wires. Clean the battery terminals periodically and apply special grease to protect the wiring harness. 5. Avoid using car electronics after the engine is turned off. Using the battery alone when the engine is not generating electricity can cause damage to it.

3

0

Share

What is the battery model for the new BMW 3 Series remote key?

The battery model for the BMW 3 Series key is CR2032. CR2032 is a lithium manganese dioxide battery, named according to the IEC standard. The breakdown is as follows: C - Indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode. R - Indicates the battery shape is cylindrical; if it were square, F would be used instead. 20 - Indicates the battery diameter is 20mm. 32 - Represents the battery height of 3.2mm. The nominal voltage is 3.0V, with an endpoint voltage of 2.0V, and the rated capacity ranges from 200-240mAh, varying by manufacturer. The shelf life of a CR2032 is typically 5 years. However, if the manufacturer's production standards are low or quality control is poor, the lifespan can be significantly shorter. Domestic top-tier brands generally guarantee this lifespan. Under ideal conditions (sealed, room temperature, no moisture, etc.), the lifespan can extend to 8 years or even 10 years. BMW models such as the 3 Series, 5 Series, and 7 Series all use the CR2032 battery for their keys. Replacing the BMW 3 Series key battery involves just three steps: Step 1: Remove the mechanical key. Press the latch on the side of the smart key to release the mechanical key. Step 2: Open the battery cover. After removing the mechanical key, you'll notice a deep slot and a shallow slot at the top of the smart key. The deep slot is for the keyhole, while the shallow slot is used to open the battery cover. Insert the mechanical key into the shallow slot and pry it open gently to reveal the coin battery. The battery can then be easily removed. Step 3: Replace the battery. Insert the new battery, reattach the battery cover, and then the mechanical key. The battery replacement is now complete. Two important notes when replacing the BMW 3 Series key battery: The key uses a CR2032 coin battery—ensure you purchase the correct model. Replace the battery quickly, as the key has a memory function. If power is lost for more than 5 minutes, the key will need to be reprogrammed.

10

2

Share

Is It Normal to Hear Abnormal Noises When Braking and Steering?

Whether it is normal to hear abnormal noises when braking and steering depends on the specific condition of the vehicle. Generally, abnormal noises during braking can be categorized into four situations: a sharp, piercing sound when braking; a dull sound when braking; a hissing sound when braking; and a clattering sound when braking after driving for a while. 1. Sharp, piercing sound when braking: New brake pads and brake discs require a break-in period. When braking, if the hard spots on the brake pads (due to the material of the pads) are being worn, this type of noise may occur, which is normal. However, if this sharp, piercing sound occurs after the brake pads have been used for tens of thousands of kilometers, it usually indicates that the brake pads are nearing their wear limit and are emitting a "warning" sound. If the noise occurs within the normal usage period of the brake pads, it is often due to foreign objects lodged in the braking system. In such cases, apart from the break-in period of new pads, the first step should be to check the brake pads for wear or foreign objects. If the pads are worn out, they should be replaced immediately. If foreign objects are present, remove the pads, extract the foreign objects, and reinstall them. 2. Dull sound when braking: This is often caused by a malfunction in the brake caliper, such as wear on the sliding pins or detachment of the spring clips, which can prevent the caliper from functioning properly. When a dull sound is heard during braking, inspect the brake caliper for worn sliding pins or detached spring clips. If found, replace them promptly. 3. Hissing sound when braking: This type of noise is harder to diagnose, as it could stem from issues with the caliper, brake disc, or brake pads. If the noise is continuous, first check for dragging brakes, as poor caliper retraction can cause prolonged friction between the disc and pads, leading to abnormal noises under certain conditions. If the noise occurs immediately after installing new pads, it may be due to a size mismatch between the new pads and the friction blocks. When a hissing sound is heard during braking, it is advisable to inspect the caliper, brake disc, and brake pads for friction issues. Replace any faulty components as needed. 4. Clattering sound when braking after driving for a while: This noise is typically caused by loose attachments on the brake pads. When a clattering sound is heard during braking, check for loose attachments on the brake pads. The best solution is to either reinforce the attachments or replace the brake pads entirely.

6

0

Share

How to Keep the Wiper Blades Running Continuously?

How to Start a Toyota Corolla?

Is the Buick GL8 Transmission Made by Aisin?

What are the reasons for high idle speed in the Excelle?

What is the battery model for the Tiguan?

What is the battery model for the new BMW 3 Series remote key?

Is It Normal to Hear Abnormal Noises When Braking and Steering?

How to reset the maintenance light on a 2017 Corolla 1.2t?

Where is the Changan Automobile engine from?

What is the method for changing the transmission oil of the Tiggo 3?

What brand is the engine of the New Baojun RM5?