How to keep the car body in the middle of the entrance when entering curve driving?

What is the reason for the fuel gauge not displaying the fuel level?

The reasons for the fuel gauge not displaying the fuel level are: 1. Abnormalities in the fuel float and ignition wire; 2. Computer signal failure; Solutions: 1. Turn the key off and on again. If this doesn't work, replace the fuel float; 2. It is recommended to go to a repair shop for maintenance. The method to check the fuel gauge is: 1. On the dashboard, the fuel gauge is commonly found in pointer or electronic forms; 2. The letters F and E are marked at both ends. Pointing to F indicates the fuel tank is full, pointing to E indicates the fuel is empty, and pointing to the middle indicates there is half of the fuel left; 3. When the fuel gauge light comes on, the fuel gauge is already pointing close to the letter E.

12

0

Share

What are the details and techniques for the B2 Subject 3 driving test?

Here are the relevant details and techniques for the B2 Subject 3 test: Starting: Before starting, check if the doors are fully closed, adjust the seat and mirrors, fasten the seatbelt, check the parking brake and gear, then start the engine. Check the dashboard, observe the interior and exterior mirrors, turn your head to observe the traffic behind, turn on the turn signal, shift gears, release the parking brake, and start moving. The starting process should be smooth, without jerking, rolling backward, or stalling. Changing lanes: Before changing lanes, correctly turn on the turn signal, observe the traffic behind through the interior and exterior mirrors, and change lanes only when it is safe to do so. After completing the lane change, turn off the turn signal. When changing lanes, judge the safe distance of the vehicle, control the driving speed, and do not hinder the normal driving of other vehicles.

20

3

Share

What is the rhyme for driving a B2 pointed truck over the "big pancakes"?

Seeing the "big pancakes" slow down first, estimate the distance to judge; look ahead and think behind with full attention, keep the vehicle close to the outer side. Below are relevant precautions for driving over the "big pancakes": The purpose of the B2 "pancake" test: The "passing continuous obstacles" item in B2 subject two, also known as "pancake pressing", although this item does not seem difficult, it tests the driver's sense of the vehicle. Coaches usually use the trick of aligning points to guide, but for examinees, the trick should be more practice to try to improve their judgment ability. Relevant requirements: There are 6 raised circular pancakes staggered on the road, the vehicle must pass over the 6 pancakes continuously; the wheels must not press on the pancakes, nor touch or rub them; the wheels must not exceed or press on the edge lines on both sides of the road.

5

3

Share

How often should the transmission fluid of an Audi A3 be changed?

Audi A3 transmission fluid should be changed every 50,000 to 80,000 kilometers. Transmission fluid is an oil product that keeps the gear system clean, ensuring the normal operation of the transmission and extending the service life of the transmission device. It also provides effective lubrication even in low-temperature conditions. The Audi A3 is a compact car with a length of 4292mm, width of 1765mm, height of 1423mm, and a wheelbase of 2578mm. The front suspension of the car's chassis is a MacPherson strut, while the rear axle features a torsion and crank-type structure with separately arranged springs and shock absorbers. In addition to excellent handling, the rear suspension also offers high space utilization.

16

5

Share

What is the ground clearance of the 10th-generation Accord?

The ground clearance of the 10th-generation Accord is 12 cm, and it reduces to 10 cm when the vehicle is fully loaded. The 10th-generation Accord is positioned as a mid-size sedan with body dimensions of 4893 mm in length, 1862 mm in width, and 1449 mm in height, along with a wheelbase of 2830 mm. In terms of powertrain, the 10th-generation Accord is equipped with three engines: a 2.0-liter naturally aspirated engine, a low-power version 1.5-liter turbocharged engine, and a high-power version 1.5-liter turbocharged engine. The 2.0-liter naturally aspirated engine delivers 146 horsepower and a maximum torque of 175 N·m, with the maximum power achieved at 6200 rpm and the peak torque at 3500 rpm.

18

4

Share

Which factory produces the Moro Motorcycle?

Moro Motorcycle is manufactured by Taizhou Senlong Motorcycle Manufacturing Co., Ltd., and it uses Longxin engines. Taizhou Senlong Motorcycle Manufacturing Co., Ltd. was established on May 16, 2016, and registered with the Taizhou Luqiao District Market Supervision and Administration. Relevant information about motorcycles is as follows: 1. Introduction: Motorcycles are powered by gasoline engines and are two or three-wheeled vehicles steered by handlebars. They are lightweight, flexible, and fast, widely used for patrol, passenger and cargo transportation, and also as sports equipment. 2. Classification: Motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, touring bikes, etc.

10

3

Share

How to keep the car body in the middle of the entrance when entering curve driving?

What is the reason for the fuel gauge not displaying the fuel level?

What are the details and techniques for the B2 Subject 3 driving test?

What is the rhyme for driving a B2 pointed truck over the "big pancakes"?

How often should the transmission fluid of an Audi A3 be changed?

What is the ground clearance of the 10th-generation Accord?

Which factory produces the Moro Motorcycle?

What is the best engine oil for Buick Envision?

How many liters of engine oil does the Edge require?

Where is the USB port in the Golf?

Is the fuel consumption of the Changan CS75 Plus high?