···
Log in / Register

How to Keep Car Windows Crystal Clear?

3 Answers
LondonLee
09/01/25 6:37am
During the glass maintenance process, the role of windshield washer fluid is crucial. When there are stains on the glass surface, cleaning with windshield washer fluid can make it much brighter. The quality of the wiper blades is another factor that ensures the clarity of car windows. Without wipers or with damaged wipers, driving would undoubtedly be very dangerous. Just like applying a screen protector to a phone, applying a film to car windows serves to protect them. The heat-insulating film for cars can provide functions such as sun protection, heat insulation, and UV protection.
Was this review help?
7
3
Share
SanIker
09/14/25 2:29am
Keeping car windows crystal clear relies on daily cleaning and prevention. Every week, I spray dedicated automotive glass cleaner and wipe thoroughly with a soft microfiber cloth, carefully treating both interior and exterior surfaces to avoid water stains or fingerprints. In summer, I park in shaded areas whenever possible to minimize oil film buildup from sun exposure; in winter, I apply anti-fog spray on the inner surface to prevent condensation from obstructing visibility. Regularly checking wiper blades for wear, ensuring washer fluid cleanliness, and using water repellent to make rainwater slide off quickly are essential. These small habits significantly enhance glass clarity, reducing driving hazards at night or in rainy conditions for safer journeys.
Was this review help?
12
4
Share
Expand All
Jared
10/28/25 3:12am
I've gained some experience in dealing with foggy car windows, especially when driving in cold weather. Before starting the car each time, I turn on the air conditioning's dehumidification function to quickly eliminate moisture, alternating between internal and external circulation to balance temperature differences. In the morning before using the car, I gently wipe the interior with a soft cloth and apply anti-fog spray for long-lasting protection. When choosing anti-fog film coatings, I always check product reviews to avoid cheap options with poor performance. I also prefer parking in well-ventilated areas to minimize temperature differentials that cause fogging. These simple steps ensure my visibility remains clear at all times - safety always comes first.
Was this review help?
4
3
Share
Expand All
More Forum Discussions

Is Leaving After Scratching a Car Considered Hit-and-Run?

Leaving after scratching a car does not necessarily constitute a hit-and-run traffic accident. It must be determined by the traffic police department after investigation. The following situations are considered hit-and-run: 1. The party involved in the traffic accident knowingly drives away or abandons the vehicle and flees the scene of the accident. 2. The party involved in the traffic accident is suspected of driving under the influence or without a license, and after reporting the incident, fails to fulfill the obligation to stay at the scene for handling, abandons the vehicle, leaves the scene, and then returns. 3. Although the party involved in the traffic accident takes the injured to the hospital, they leave the hospital without reporting the incident and without a valid reason. 4. Although the party involved in the traffic accident takes the injured to the hospital, they leave the hospital after providing false names, addresses, or contact information to the injured or their family. 5. The party involved in the traffic accident flees during the investigation period.
17
2
Share

What to Do If the Dash Cam Keeps Falling Off the Windshield?

Solutions for a falling dash cam are as follows: 1. Use 3M adhesive and a bonding promoter to secure the dash cam firmly. 2. Before installing the dash cam, ensure the installation area on the windshield is clean. 3. The adhesive-mounted dash cam should be installed on a dry surface. You can use a hairdryer to heat the adhesive for better bonding. 4. For suction cup-mounted dash cams, apply a small amount of water to the suction cup before attaching it to the windshield for a more stable hold. Installation instructions for dash cams are as follows: (1) Before installing the dash cam, first determine the installation location. It is best to choose a central position, slightly to the right of the rearview mirror, as this provides a straight filming angle and more convincing evidence. Many dash cams are designed in the form of a rearview mirror, allowing direct replacement of the original rearview mirror. (2) After determining the installation location, the owner should plan the wiring route virtually. Once the general wiring path is understood, determine the power cord.
4
0
Share

Where is the headlight height adjustment for the Toyota Avalon?

The headlight height adjustment for the Toyota Avalon is located in the engine compartment. The adjustment method is as follows: 1. Find a wall and park the car 10 meters away from it. 2. Measure the height from the ground to the center of the headlights and the distance between the two headlights. 3. Place horizontal masking tape on the wall at a position 0.1m lower than the headlight height, ensuring the tape is centered on the car. 4. Turn on the headlights and adjust the vertical adjustment screw until the headlight beam is centered on the tape on the wall. 5. Continue adjusting the vertical screw until the headlight beam is pointing straight forward. Taking the 2019 Toyota Avalon as an example, it is a mid-size sedan with the following dimensions: length 4975mm, width 1850mm, height 1450mm, wheelbase 2870mm, fuel tank capacity 49 liters, and curb weight 1670kg.
12
0
Share

What does it mean when the Buick Envision prompts that the four-wheel drive is turned off?

Buick Envision prompts that the four-wheel drive is turned off means that the current driving conditions do not require the four-wheel drive mode, and only two-wheel drive is needed. Taking the 2020 Buick Envision as an example, its body structure is a five-door, five-seat SUV, with body dimensions of: length 4694mm, width 1839mm, height 1686mm, wheelbase of 2750mm, and a fuel tank capacity of 66l. The 2020 Buick Envision is equipped with a 1.5T inline 4-cylinder turbocharged engine, with a maximum horsepower of 169PS, a maximum power of 124kW, and a maximum torque of 250Nm.
15
5
Share

What are the reasons for the OBD light to come on in a car?

The reasons for the OBD light to come on in a car are: 1. Engine sensor malfunction, abnormal operation of the sensor; 2. Dirty throttle; 3. Damaged spark plug causing the OBD light to come on; 4. Abnormal working pressure of the fuel pump; 5. Contaminated or damaged fuel filter; 6. Dirty or damaged three-way catalytic converter. The working principle of OBD: When an emission fault occurs, the ECU records the fault information and related codes, and informs the driver through the malfunction indicator light or the check engine light. OBD includes: 1. EGR; 2. Engine; 3. Particulate filter; 4. Catalytic converter; 5. Oxygen sensor; 6. Emission control system; 7. Fuel system.
20
4
Share

Why is the engine oil black when drained?

The reason why the engine oil turns black when drained is due to not changing the oil in time. The functions of engine oil are: 1. To alleviate friction and high temperatures; 2. To reduce gas leakage and prevent external pollutants; 3. To prevent contact between water, air, acidic harmful gases, and engine parts; 4. To buffer the pressure rise in the engine cylinder ports; 5. To flush away dirt generated on the working surfaces of parts. The method for changing engine oil is: 1. Lift the car and remove the bottom guard plate; 2. Place an oil container under the oil pan and loosen the drain plug; 3. After the oil is completely drained, replace the oil filter and apply a layer of oil around it; 4. Tighten the drain plug, reinstall the guard plate, lower the car, and pour in the new engine oil.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.