How to Judge the Left and Right Distance of the Car Front While Driving?

2 Answers
DiPhoebe
07/25/25 2:57am
Here are specific methods to judge the distance while driving: 1. Use fixed reference points on the car to determine the left-side distance. When the midpoint of the vehicle's left rearview mirror aligns with the left sideline, the distance between the vehicle and the sideline is 1.5 meters. When the first wiper node is on the left sideline, the left wheel of the vehicle is pressing on the sideline. 2. When the white line is at the midpoint of the engine hood, the right wheel of the vehicle is already pressing the line. When the white line is at the halfway point on the right side of the engine hood, the vehicle is 30 centimeters away from the right sideline. When the line is at the one-third point on the right side of the engine hood, the vehicle is 60 centimeters away from the right sideline. 3. When the distance between the vehicle and an obstacle vehicle is 20 centimeters, the lowest visible point of the obstacle vehicle is at 80 centimeters. For sedans, 80 centimeters is roughly below the door handle, while for SUVs, it is around the lower edge of the headlights. Therefore, when approaching an obstacle vehicle, ensure you can see below the door handle or the lower edge of the headlights.
Was this review help?
5
4
Share
Stephanie
08/10/25 4:46pm
Having driven for over a decade, I rely on accumulated experience and practical exploration to judge the distance between the front of the car and obstacles on either side. While driving, I keep a close eye on road conditions. For example, when parking in a lot, I observe the relationship between the front edge of the car and roadside obstacles. When turning left, I focus on the shadow of the left tire or the height of the curb; when turning right, I glance at the alignment between the right corner of the car and the pedestrian line. I slow down and release the accelerator to gauge the distance. When I have time, I practice in a safe open area with cones, repeatedly moving in and out to develop intuition. Additionally, checking the side mirrors to see the gaps between the car body and obstacles helps build spatial awareness, especially on narrow roads. Over time, even driving through busy alleys doesn’t worry me about scraping anything.
Was this review help?
4
4
Share
Expand All
More Forum Discussions

Where is the Jetta VS7 engine produced?

Jetta VS7 is equipped with the Volkswagen EA211 series 1.4T engine. Introduction to Jetta VS7: 1. Power: It features a 1.4-liter turbocharged engine with direct injection technology and an aluminum alloy cylinder head and block. 2. Body dimensions: Jetta VS7 is a mid-size SUV under the Jetta brand, with a length of 4624 mm, width of 1841 mm, height of 1644 mm, and a wheelbase of 2730 mm. 3. Suspension: The front suspension uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension, which can improve the wheel's ground contact performance and enhance traction.
12
5
Share

How to reset the maintenance light on an Audi Q5?

Open the MMI system menu, click the "CAR" button, select "Maintenance and Inspection" by rotating the knob, press the knob to confirm and enter the next submenu. Under the "Maintenance and Inspection" submenu, select "Maintenance Interval," press the knob to confirm and enter the next submenu, then follow the prompts to reset the maintenance interval to complete the maintenance light reset. Introduction to the Audi Q5: 1. Exterior: It features 19-inch fan-blade-style wheels, which, compared to the 20-inch wheels of the gasoline version, are less luxurious and imposing but more technologically advanced. 2. Powertrain: It is equipped with a 2.0T engine and an 8-speed automatic transmission.
11
2
Share

What transmission is the GM6 equipped with?

Transmission of the Trumpchi GM6 is a product of the GAC brand. The transmission is a mechanism used to alter the speed and torque from the engine, capable of fixed or stepped changes in the transmission ratio between the output and input shafts, also known as the gearbox. The functions of the transmission include: 1. Changing the transmission ratio to expand the range of torque and speed variations at the drive wheels. 2. Enabling the vehicle to reverse while maintaining the engine's rotational direction. Classification of transmissions: 1. Stepped transmissions utilize gear mechanisms with several fixed transmission ratios. 2. Continuously Variable Transmissions (CVT) can achieve any transmission ratio within a continuous range. 3. Integrated transmissions refer to hydromechanical transmissions composed of a torque converter and a geared stepped transmission.
8
2
Share

Where is the Peugeot 301's cabin air filter located in the car?

Peugeot 301's cabin air filter is located inside the left dashboard glove compartment. For Dongfeng Peugeot 301, the cabin air filter is situated inside the glovebox beneath the front passenger seat - it becomes visible upon removal. If replacement is needed, it's recommended to visit a repair shop. Below is relevant information about automotive cabin air filters: 1. The cabin air filter, commonly known as the pollen filter, serves to purify air entering the vehicle interior from outside, improving air cleanliness. Typical filtered substances include airborne impurities, microscopic particles, pollen, bacteria, industrial exhaust gases, and dust. 2. The cabin air filter's function is to prevent such substances from entering the AC system, thereby protecting the system, providing occupants with clean air, safeguarding passenger health, and preventing window fogging.
8
5
Share

Does Using Recirculated Air Consume More Fuel?

Using recirculated air does consume more fuel. The reasons are as follows: Reason 1: Theoretically, using any electrical appliance will increase fuel consumption. Reason 2: When the system is working, it sends the cold air inside the car directly to the compressor for cooling, which can cool the car faster. Although this consumes less electricity, it still increases fuel consumption. Information about recirculated air is as follows: Function: The main purpose of recirculated air is to promptly and effectively block external dust and harmful gases from entering the car, such as when driving through smoke, dust, areas with strong odors, or in heavy traffic, to prevent harmful exhaust emissions from the vehicle ahead. Do not use it for extended periods: The recirculated air function can cool the car quickly. However, if it is used for a long time without fresh air intake, the windows may fog up easily, and the air inside the car can become stale over time.
9
3
Share

How to Avoid Crossing the Line at the Exit of an S-Curve?

S-Curve exit methods to avoid crossing the line are as follows: 1. A major reason for crossing the line in an S-curve is that the vehicle is not properly aligned in the middle of the curve when entering. Generally, the S-curve follows the parallel parking section, and there is usually a long distance between these two sections to straighten the vehicle. During this distance, move the vehicle slightly to the left, aligning the vertex of the angle between the left A-pillar and the lower edge of the windshield with the left boundary line until reaching the S-curve. This ensures the vehicle is centered. 2. Many learners tend to get nervous during the Subject 2 driving test, leading to basic mistakes like crossing the line at the S-curve exit. Therefore, the key is to adjust one's mindset. Try to maintain a lower speed, as only a slow speed provides enough time to observe and adjust the vehicle's position.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.