How to Judge the Distance on the Right Side of the Car?

2 Answers
DelFaith
07/25/25 4:11pm
Methods to judge the distance on the right side of the car: Use the right wiper and rearview mirror to estimate the distance. Generally, when the node of the right wiper aligns with the roadside, slightly steering to the left can achieve parking about 10cm from the curb. When the extension line of the lane divider is about 10cm from the lower left corner of the windshield, the vehicle is approximately 50 to 60cm from the left lane. Similarly, if there is a traffic barrier or curb on the left, this method can also be applied. When the edge of the car's front aligns with the lower edge of the license plate of the car ahead, the distance is about 0.5 meters. Judging the rear distance is much simpler with the assistance of a reversing camera or parking sensors, as the rear blind spot is relatively large. If observing from the interior rearview mirror, when the area below the engine hood of the rear vehicle is obscured, the distance to the rear vehicle is about 5 meters. Similarly, when the rear windshield of the following car is just visible in the rearview mirror, the distance is approximately 0.5 meters.
Was this review help?
16
4
Share
LaKarter
08/11/25 9:43pm
After years of driving, judging the distance on the right side mainly relies on developing habits and using mirrors. I always adjust the rearview mirror position to ensure I can see the edge of the car's side, so when observing the gap between the car body and the roadside or obstacles in the mirror, it feels safe when it's about 30 centimeters or closer. I'm especially careful when parking. If there are pillars or railings on the right side, I slowly approach while turning my head to check the blind spot to avoid scratches. In actual operation, spatial awareness is crucial. I often practice in open areas, such as using cones or dummies to mark positions, and repeated trial and error can improve accuracy. After developing this habit, driving in congested cities is no longer intimidating, and it also helps reduce unnecessary scratches. The key is not to rush; accumulating experience naturally leads to mastery.
Was this review help?
8
3
Share
Expand All
More Forum Discussions

How many kilometers can a fuel pump generally last?

The service life of a fuel pump is approximately 100,000 kilometers. In practical use, it is advisable to replace it upon failure. As a fundamental component of the engine's fuel supply system, the fuel pump is responsible for drawing fuel from the tank during engine operation, delivering it at a certain pressure through the fuel supply line to the engine, where it undergoes secondary pressurization by the high-pressure fuel pump. It then supplies a measured amount of fuel to each cylinder according to the engine's firing order. Symptoms of a failing fuel pump include: 1. Weak acceleration with jerking during sudden acceleration; 2. Difficulty starting, requiring prolonged ignition; 3. Illuminated engine warning light; 4. Unusual noises during driving; 5. Abnormal engine vibration; 6. Failure of the fuel supply system.
5
2
Share

Is there a big difference in power between the Sagitar 1.2 and 1.4?

There is a certain difference. The following are the specific differences between the Sagitar 1.2T and 1.4T: 1. Different engine models: The 1.2T engine model is EA211-DJN, while the 1.4T engine model is EA211-DJS. 2. Different top speeds: The 1.2T has a top speed of 200 km/h, with an official 0-100 km/h acceleration time of 11.2 seconds; the 1.4T has a top speed of 220 km/h, with an official 0-100 km/h acceleration time of 9.3 seconds. 3. Different power and torque: The 1.2T has a maximum power of 85 kW and a maximum torque of 200 Nm; the 1.4T has a maximum power of 110 kW and a maximum torque of 250 Nm.
9
0
Share

How to replace the battery in a BYD F3 remote control?

BYD F3 remote control battery replacement method is: 1. Open the key cover, use a coin or screwdriver to pry up and remove the mechanical key; 2. Use a screwdriver to remove the old battery and replace it with a new one. Taking the 2009 BYD F3 as an example, its body dimensions are: length 4533mm, width 1705mm, height 1490mm, wheelbase 2600mm, fuel tank capacity 50L, trunk capacity 430L. The 2009 BYD F3 features MacPherson strut front suspension and torsion beam rear suspension, equipped with a 1.5L naturally aspirated engine producing 106PS maximum horsepower, 78kW maximum power, and 134Nm maximum torque, paired with a 5-speed manual transmission.
15
4
Share

What are the reasons for unstable idle speed and jerking in BMW N20?

BMW N20 unstable idle speed and jerking are caused by: 1. Failure of the vehicle's ignition system; 2. Loosening of components in the ignition system; 3. Severe carbon deposits in the engine; 4. Aging of engine components; 5. Excessive carbon deposits in the throttle; 6. Untimely replacement of the air filter; 7. Excessive carbon deposits in the fuel injectors; 8. Problems with the ignition system; 9. Unstable oil pressure. The idle speed of a car is not a specific speed but refers to an operating condition. When the engine runs without load, it is called idling. When the engine is running and the accelerator pedal is fully released, the engine is in an idle state. The engine speed during idling is called idle speed, which can be adjusted by modifying the throttle opening size, among other methods.
10
4
Share

Where is the fuel tank cap switch of Geely Emgrand?

Geely Emgrand fuel tank cap switch is located under the driver's seat. There is a handle for opening the fuel tank at this position. Lift it up to open the fuel tank. Taking the 2021 Geely Emgrand as an example, it is a compact car with a body size of 4632mm in length, 1789mm in width, 1470mm in height, a wheelbase of 2650mm, and a body weight of 1255kg. The 2021 Geely Emgrand has a front McPherson independent suspension and a rear torsion beam non-independent suspension. It is equipped with a 1.5L naturally aspirated engine, with a maximum horsepower of 109ps, a maximum torque of 142nm, and a maximum power of 80kw, matched with a 5-speed manual transmission.
3
0
Share

Where to Dispose of Used Engine Oil?

As the state classifies used engine oil as hazardous waste, it is not allowed to be discarded arbitrarily. The disposal methods for used engine oil are as follows: 1. Non-treatment: Used as fuel in oil-fired boilers. 2. In construction: Used as a concrete release agent to prevent concrete from sticking to construction formwork before pouring. 3. On roads: Sprayed on dusty roads to bind dust and serve as a dust suppressant. Relevant information about engine oil is as follows: 1. Engine oil: It is the lubricating oil used by engines, composed of base oil and additives. 2. Functions: With a density of approximately 0.91×10³ (kg/m³), engine oil can lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and act as a shock absorber for the engine. It is hailed as the 'blood' of automobiles.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.