How to Judge the Distance of the Rear Car from the Rearview Mirror?

How to Upgrade from C1 to B2 Driver's License?

Application process for upgrading to a B2 driver's license: Apply to the Vehicle Management Office for adding B2 license type; For adding driving license types, Submit ID card and physical examination form, and present original motor vehicle driver's license; Attend theoretical and practical exams as scheduled; The applying Vehicle Management Office will issue the new-level driver's license within 7 working days after passing exams. Exam process for upgrading from C1 to B2 driver's license: Upgrading from C1 to B2 requires retaking all exams starting from Subject 1. The contents of Subject 1, Subject 3 and Subject 4 remain unchanged, which are theoretical test, road test and safe civilized driving test respectively. Subject 2 includes: stake test, slope fixed-point parking and starting, parallel parking, single-plank bridge, curve driving, right-angle turn, limited-width gate, continuous obstacles, bumpy road driving, narrow road U-turn, as well as simulations of expressway, continuous sharp turns on mountain roads, tunnels, rain(fog) weather, slippery roads, and emergency handling.

11

5

Share

Can the original battery of Nissan Sylphy be left unused for a long time?

The original battery of Nissan Sylphy cannot be left unused for a long time. Here is the relevant information: 1. The original battery of Nissan Sylphy cannot be left unused for a long time, as the battery may become too weak to start the car after prolonged inactivity. It is necessary to check it in time and replace it with a new one if needed. 2. To prevent the car battery from discharging due to long-term parking, the best practice is to start the car regularly and let the car's built-in generator charge the battery. If the battery is in good condition, starting the car once every half month and running it at about 2,000 rpm for about half an hour can basically replenish the self-discharge of the battery. If the battery's technical condition is not good, it is best to start the car once a week. 3. Modern cars do not recommend disconnecting the battery connection line. On one hand, after disconnecting the line, the car's anti-theft system will stop working, posing a risk of theft or damage to the car. On the other hand, after the battery is disconnected, many settings on the car will be lost and need to be reset when the car is used again. Some cars even require a special computer to reset the engine control unit system before they can be started after the battery is disconnected, which is not worth the effort.

16

0

Share

Does the Peugeot 308 Have a Turbocharger?

The Peugeot 308 is equipped with a turbocharger, but it also has a naturally aspirated version. Below are the detailed specifications for both the turbocharged and naturally aspirated engines: 1. The low-power version of the Peugeot 308's 1.2-liter turbocharged engine delivers 116 horsepower and a maximum torque of 190 Nm. This engine reaches its peak torque between 1,500 and 3,500 rpm and its maximum power at 5,500 rpm. It features continuous variable valve timing and direct fuel injection technology, with an aluminum cylinder head and block. 2. The high-power version of the 1.2-liter turbocharged engine produces 136 horsepower and a maximum torque of 230 Nm. Its peak torque is achieved between 1,750 and 3,500 rpm, with maximum power at 5,500 rpm. This engine also utilizes direct fuel injection technology and has an aluminum cylinder head and block. 3. The 1.6-liter naturally aspirated engine generates 117 horsepower and a maximum torque of 150 Nm. It reaches peak torque at 4,000 rpm and maximum power at 6,000 rpm. This engine employs multi-point fuel injection technology and features an aluminum cylinder head with a cast iron block.

13

0

Share

What are the symptoms of spark plug aging?

Symptoms of spark plug aging: Difficulty starting, low power, excessive exhaust emissions, increased fuel consumption. Steps for replacing spark plugs: Open the hood, lift the plastic cover of the engine, remove the high-voltage distributor wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for external debris like leaves or dust and ensure thorough cleaning. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage distributor wires according to the firing order and secure the cover. Methods to determine if a spark plug is damaged: Remove the spark plug and observe its condition based on the following appearance colors. A normal spark plug's insulator skirt and electrodes appear gray-white, gray-yellow, or light brown. A properly functioning spark plug has a reddish-brown insulator skirt, with an electrode gap between 0.8-0.9mm and no signs of electrode burn. If the spark plug has oil stains or deposits but is not damaged, it can continue to be used after cleaning off the oil and deposits. If the spark plug is severely damaged, showing signs like blistering at the top, black streaks, cracks, or melted electrodes, identify the cause of the damage. After troubleshooting, replace the spark plug. Additionally, if the spark plug appears black as if smoked, it indicates the wrong heat range was selected or the air-fuel mixture is too rich, with oil creeping up.

18

1

Share

Reasons for the Exclamation Mark Light to Illuminate?

The appearance of an exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. Many indicator lights on the car dashboard feature an exclamation mark, such as the tire pressure indicator light, lighting fault indicator light, steering system fault indicator light, braking system fault light, transmission fault indicator light, and wiper fault indicator light. Below is a detailed explanation of the exclamation mark fault lights: General Faults: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the car's general performance or components and functions. Common issues include parking sensor faults, fuel cut-off system intervention or faults, external light faults, engine oil pressure sensor faults, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant level below the normal range. The transmission fluid should be replaced promptly. Braking System Fault: A circle with parentheses and an exclamation mark in the middle. This represents a warning for the braking system, mainly indicating a braking system fault or low brake fluid level. Immediate inspection of the braking system is required to avoid accidents. Tire Pressure Abnormality: A horizontal line with parentheses below and an exclamation mark in the middle. This represents the tire pressure monitoring warning light, which illuminates when the car's tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator light, indicating a fault in the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue. In addition, during daily vehicle use, the fault lights displayed on the vehicle dashboard are divided into two different colors: yellow and red: Yellow indicates a fault in the corresponding system that is not very severe. Reduce speed and proceed to the nearest repair point for maintenance to eliminate potential safety hazards in time. Red indicates a very serious problem in the corresponding system. In such cases, do not continue driving. Pull over immediately and seek professional assistance to prevent unpredictable dangers to the vehicle and personal safety. It is important to note that when the car is started, all lights will illuminate as the system performs an automatic check. After the check is completed, the lights will turn off automatically. If a light does not illuminate when the ignition is turned on, remains lit without turning off, or lights up while driving, it indicates a fault in the related system. In such cases, seek professional help promptly for inspection and elimination of safety hazards.

3

5

Share

What is the normal tire pressure for the Nissan X-Trail?

The normal tire pressure range for the Nissan X-Trail is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and decreased by 0.1bar in summer. This data is based on the international GBT2978-2008 standard. The high-end models of the Nissan X-Trail are equipped with a tire pressure monitoring alarm system, which can be viewed on the dashboard. The tire pressure monitoring system automatically monitors the tire pressure and displays specific values while the vehicle is in motion. For other models, external instruments must be used to check the tire pressure. It is recommended to inspect the tire appearance and pressure before long-distance driving. Generally, a tire pressure exceeding 2.8bar is considered too high, while a tire pressure below 2.0bar is considered too low. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; reduces the functionality of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. The system typically alerts when the pressure is below 1.8bar or above 3.0bar. In this case, tire inspection and pressure adjustment are necessary. Tire pressure monitoring not reset. After inflating the tires, the system was not reset in time, causing it to display the previous data, which triggers the indicator light. Simply reset the tire pressure monitoring system. Damaged tire pressure sensor. The sensor, which monitors tire pressure, is installed inside the tire and connected to the inflation valve. If the sensor is damaged during driving, the tire pressure warning light will illuminate. For sensor damage, the only solution is to replace it with a new one.

12

0

Share

How to Judge the Distance of the Rear Car from the Rearview Mirror?

How to Upgrade from C1 to B2 Driver's License?

Can the original battery of Nissan Sylphy be left unused for a long time?

Does the Peugeot 308 Have a Turbocharger?

What are the symptoms of spark plug aging?

Reasons for the Exclamation Mark Light to Illuminate?

What is the normal tire pressure for the Nissan X-Trail?

Is the clutch of the Nissan Qashqai dry or wet?

Do I Need to Bring Cash When Picking Up the Car?

Under What Circumstances Is a Wheel Alignment Needed?

What is the wheelbase of the Volkswagen Tharu?