···
Log in / Register

How to Judge the Distance Between Left Reverse Parking and the Sideline?

3 Answers
StDaniella
07/29/25 4:34pm
Left reverse parking and the distance to the sideline can be judged by parking slightly to the right between the two yellow dashed lines, maintaining approximately 1.5 meters from the left sideline. Below are additional details: 1. Exam Preparation: Adjust the seat first after getting into the car, fasten the seatbelt, and adjust the rearview mirror to its lowest position. 2. Parking Technique: When entering the reverse parking test area, keep the car 1.5 meters away from the outer sideline. Parking too far may lead to crossing the line during reversing, while parking too close may make it impossible to reverse into the space. When starting the left reverse parking, observe through the lower edge of the left rearview mirror. When the control line aligns with the lower edge of the left rearview mirror, turn the steering wheel fully to the left. Similarly, when stopping during reverse parking, observe through the lower edge of the left rearview mirror and stop when the lower edge aligns with the parking space sideline. The method for exiting the parking space is the same as for left reverse parking.
Was this review help?
18
5
Share
DeMarley
08/14/25 5:49am
After years of driving, I've found that judging the distance to the sideline during left reverse parking mainly relies on the rearview mirror and intuition. Usually before starting to reverse, I first glance at the left rearview mirror to observe the position of the sideline in the mirror, roughly maintaining a fist-sized gap between the car body and the line. Then I reverse slowly, and when I feel the car body starting to deviate, I quickly make minor steering adjustments to avoid getting too close. Every car is different in size, especially my compact car which is more prone to scraping in narrow parking spaces. So I recommend practicing more in empty spaces when possible, to familiarize yourself with the car's turning radius and blind spots, rather than rushing for tests or parking. After developing this habit, I can now usually park accurately in one attempt, while also preventing wheel rim scratches – it's both safe and worry-free.
Was this review help?
14
2
Share
Expand All
SanLouis
10/12/25 8:36am
When helping friends practice driving, I always remind them to use reference points to assist in judgment. When reversing into the left parking space, pay attention to when the left rear wheel is roughly parallel to the parking line, then start turning the steering wheel. At the same time, keep a close eye on the left rearview mirror, maintaining a distance about the width of a phone between the line and the car body. The reversing process should be slow and steady; if the line appears too far in the mirror, turn left, and if it's too close, turn right. Many people overlook speed control, and going too fast can lead to mistakes. It's advisable to observe the parking space structure more before stopping, such as checking if the ground is uneven or the lines are too faint. Mastering these small details will make both the driving test and daily parking smoother.
Was this review help?
16
1
Share
Expand All
More Forum Discussions

What is the difference between 20t and 2.0t?

The difference between 20t and 2.0t lies in the displacement, as well as the turbo size and turbo pressure. Turbocharging Technology: Turbocharging technology was initially applied to aircraft engines to address the issue of insufficient air intake at high altitudes. Later, this technology was adapted for use in diesel engines. Maintenance and Upkeep: The 20t engine is more fuel-efficient than the 2.0t engine, and its maintenance costs are also slightly lower. When choosing a turbocharged engine model, it's important to select an appropriate displacement rather than pursuing excessively large displacements.
1
3
Share

What is the lifespan of halogen headlights?

The lifespan of halogen headlights is generally around 2,500 hours. Here is some relevant information about halogen headlights: 1. Definition: Halogen bulbs, also known as halogen lamps or tungsten halogen bulbs, quartz bulbs, are a variant of incandescent lamps. Halogen lights generally have lower brightness; for example, a 55W halogen bulb typically produces just over 1,000 lumens. 2. Working Principle: They operate based on the principle of thermal radiation and incandescence—simply put, when sufficient current passes through the filament, it heats up to incandescence and emits light. However, the lifespan of such incandescent lamps is relatively very short.
18
5
Share

Where is the Bluetooth connection for the Audi Q2L?

Audi Q2L's Bluetooth connection is located in the settings menu of the central control screen. Below is a related introduction to the Audi Q2L: 1. Body dimensions: The Audi Q2L is a compact SUV, with a length, width, and height of 4237mm, 1785mm, and 1548mm respectively, and a wheelbase of 2628mm. 2. Power: The Audi Q2L has a total motor power of 100KW and a total torque of 290 Nm. 3. Suspension: The front suspension of the Audi Q2L pure electric version uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension.
3
0
Share

Can a gas cylinder be placed inside a car?

Gas cylinders should not be placed inside a car. Hazards of placing gas cylinders in a car: During driving, the car may experience bumps. If the cylinder itself has quality issues, such as thin walls, it can easily be damaged during transportation, and impacts may cause explosions. Precautions for gas cylinders: According to regulations, any vehicle transporting hazardous materials must have a transportation permit issued by the heavy chemical department. Drivers must also undergo training and obtain certification, and there must be a certified escort during transportation. However, some operators have weak safety awareness and prioritize profit, reflecting poor management at liquefied petroleum gas filling stations.
8
0
Share

How to Register a Used Car?

The method to register a used car is for the owner to prepare the relevant materials, go to the transfer hall to explain the situation and submit the documents. After the vehicle passes the inspection, a temporary license plate will be issued. Then, drive the car to the seller's location and use the file to complete the transfer procedures at the relevant unit. Below is an introduction to the documents required for the transfer of a used car: 1. Seller's ID: Original and photocopy of the seller's personal ID card. 2. Buyer's ID: Original and photocopy of the buyer's personal ID card. 3. Vehicle documents: Original and photocopy of the motor vehicle registration certificate of the car being transferred. 4. Driving documents: Original and photocopy of the vehicle's driving license.
16
5
Share

Will Not Wearing a Seatbelt Be Captured by Cameras?

Not wearing a seatbelt will be captured by cameras. The protective functions of seatbelts: Prevent drivers and passengers from being thrown out of the vehicle; counteract the deceleration during a collision, ensuring that drivers and passengers do not experience a secondary impact with objects such as the steering wheel, dashboard, or windshield. Precautions for correctly wearing a seatbelt: The lap belt should be fastened snugly across the hips, just below the pelvic bones, in contact with the femur. During a collision, the force is distributed to the pelvic bones, avoiding severe injuries caused by the belt tightening around the abdomen. The shoulder belt should cross over the shoulder and chest. These areas of the human body can effectively withstand the restraining force of the seatbelt.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.