How to Judge the Distance Between Both Sides of the Car

1 Answers
LeArianna
07/30/25 12:05am
Methods to judge the distance between both sides of the car are: 1. When the line of sight aligns the protruding node of the left wiper with an object on the ground, the left wheel will run over that object while moving; 2. When the right spray hole on the hood aligns with the edge of the road, the car body is about one meter away from the roadside; 3. When the right rearview mirror shows the anti-collision strip on the car door or one-third of the door, the distance to the adjacent object is 1 meter; 4. When the line of sight intersects the right wiper with the target, the tire will run over that target; 5. When the midline of the angle between the glass wool board and the A-pillar aligns, the car body is 60 centimeters away from the midline.
Was this review help?
16
4
Share
More Forum Discussions

Does passing through a flashing yellow light count as running a red light?

Running a yellow light and running a red light are both considered the same traffic violation—driving a motor vehicle in violation of traffic signal regulations. According to the "Road Traffic Safety Law of the People's Republic of China," this offense is punishable by a fine and a deduction of 6 points from the driver's license. Article 26 of the "Road Traffic Safety Law of the People's Republic of China" states: Traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to proceed, and a yellow light serves as a warning. The "Road Traffic Safety Law" stipulates: A yellow light serves as a warning, and motor vehicles should slow down when approaching an intersection. If the vehicle has already crossed the stop line when the yellow light comes on, it may continue to pass; otherwise, it should stop. The "Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China," Article 38, specifies the meanings of motor vehicle and non-motor vehicle traffic signals: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not hinder the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to pass. When the red light is on, vehicles are prohibited from passing. At intersections without non-motor vehicle or pedestrian crossing signals, non-motor vehicles and pedestrians should follow the motor vehicle traffic signals. When the red light is on, right-turning vehicles may proceed if they do not hinder the passage of other vehicles or pedestrians. Electronic traffic enforcement captures red-light running based on the following three photos, which are reviewed by traffic police to determine whether a violation occurred: An image of the vehicle not having passed the stop line when the red light is on. An image of the vehicle's front wheels pressing against the stop line. An image of the vehicle's entire body crossing the stop line. If these three photos show that the vehicle moved beyond the stop line while the red light was on, the traffic police can determine that the vehicle ran a red light during review. To avoid running a yellow light: Slow down when approaching an intersection, maintain a speed of 20–30 km/h, keep a safe distance from the vehicle ahead, and avoid tailgating or rushing through a yellow light. Alternatively, pay attention to the traffic signal in advance; observe the duration of the green light—if traffic is light and the green light lasts longer, prepare to slow down.
15
0
Share

What are the reasons for the engine warning light being on in a small truck?

The engine warning light may illuminate due to the following 7 main reasons: Sensor malfunction: The sensors referred to here include those for coolant temperature, crankshaft position, air flow, intake air temperature, oxygen, etc. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, which may trigger the engine warning light. Fuel quality issues: If fuel and engine oil are not added according to the manufacturer's requirements, it may cause engine wear and lead to the warning light illuminating. Poor combustion of the air-fuel mixture: Poor combustion can cause engine carbon deposits or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a warning. Issues such as spark plug failure, ignition coil failure, fuel pump failure, or fuel line blockage can all lead to poor combustion of the air-fuel mixture. Turbocharging problems: The intake boost pipeline and turbocharger can also cause the engine warning light to illuminate. The most common issue is turbocharger damage, accompanied by symptoms such as oil leakage, high oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake problems: If there are issues with the vehicle's intake, it may lead to engine pipeline blockages, and in severe cases, cause the engine warning light to illuminate. A dirty air filter that is not cleaned regularly can lead to intake problems. Exhaust problems: Exhaust faults can also trigger the engine warning light. Common causes include rear oxygen sensor failure, catalytic converter issues, exhaust camshaft and bearing failures, with the catalytic converter being the most frequent culprit. Using leaded gasoline, lead or silicon-containing lubricant additives, physical damage to the catalytic converter, or fuel system failures can easily cause catalytic converter problems. Anti-theft system malfunction: If the vehicle's electronic anti-theft system malfunctions, or if the anti-theft controller does not match the engine electronic controller, the anti-theft system can prevent the engine from operating normally and trigger the engine warning light. If the engine warning light is on, follow these steps: First, check if the engine is running normally and whether there are issues such as shaking or black smoke. If so, avoid restarting the engine. Note: Do not restart the engine if the red warning light is on. If the engine can start, turn it off for 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'on' position without pressing the clutch. The vehicle will enter self-check mode after powering on. Observe whether the warning light turns off after 5-10 seconds. If the warning light remains on, visit a service center as soon as possible. The service center can use a portable diagnostic tool to read the fault code, identify the issue, and perform targeted repairs.
8
5
Share

What is the Toyota EXR sedan?

EXR is not a specific car model, but rather a trim level available across many Toyota vehicles. For instance, the Toyota Prado, Fortuner, and Land Cruiser all offer EXR trim options. Below are some details about the Toyota Land Cruiser: 1. The Toyota Land Cruiser 4600 measures 4950×1970×1880 mm in length, width, and height, with a wheelbase of 2850 mm. 2. The interior of the Land Cruiser complements its exterior design, featuring a dashboard with simple yet bold straight lines. The combination of strong horizontal and vertical lines creates a harmonious blend of flat surfaces and curves, resulting in a visually appealing three-dimensional effect.
5
4
Share

How many seats does the JADE have?

JADE is a 7-seater car. The Honda JADE is a station wagon under the Honda brand, featuring a newly styled front bumper with a more sporty design. The dimensions of the JADE are 4660×1775×1500MM in length, width, and height, with a wheelbase of 2760MM. Details about the JADE are as follows: 1. The JADE's tire size is 215/50 R17, from the Yokohama ADVAN dB series, known for its quiet comfort and balanced handling performance. 2. In terms of driving style, the JADE exhibits family-oriented characteristics, with a light throttle and paired with a CVT transmission.
15
2
Share

Where are the seat adjustment buttons located on a Mercedes-Benz door?

Mercedes-Benz seat adjustment buttons are uniquely positioned on the door handle area, featuring a multi-button cluster resembling a seat shape. Below are the auxiliary functions of the seat: 1. Seat Memory Function: It can store preset seat angles, allowing drivers to quickly adjust to their preferred seating position for driving. 2. Seat Heating Function: During cold weather, the seat can be adjusted to the desired temperature upon entering the vehicle. 3. Seat Ventilation Function: Ventilation enhances seat comfort, especially in hot weather conditions.
13
3
Share

How many liters of oil can the Fengfan gearbox hold?

Honda Fengfan fuel tank can hold 42 liters of fuel. The user manual of Honda Fengfan indicates that the fuel tank capacity is 42 liters, and the gasoline grade is 92. This grade of gasoline should be used consistently and not changed arbitrarily. Information about the fuel tank is as follows: 1. The fuel tank is a container for fuel in aircraft or automobiles, and a specialized container for storing hydraulic oil or hydraulic fluid in hydraulic systems. 2. In addition to storing oil, the fuel tank in the hydraulic system also serves to dissipate heat, separate air bubbles from the oil, and precipitate impurities. The fuel tank is equipped with many accessories, such as coolers, heaters, air filters, and liquid level gauges.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.