How to Issue an Electronic Invoice for Refueling?

2 Answers
McKatherine
07/25/25 1:59am
If the consumer pays through the gas station's app, they only need to fill in the company's name and identification number. If payment is made via bank card or a third-party payment platform, they can apply to the gas station staff. They should provide their personal mobile phone number and other invoice information to the staff, who will then send the processed electronic invoice to the consumer's phone.
Was this review help?
4
0
Share
Lynne
08/10/25 4:22pm
Answer 1
Was this review help?
19
3
Share
Expand All
More Forum Discussions

How many driving modes does the XPeng P7 have?

XPeng P7 offers three driving modes: ECO mode, Standard mode, and Sport mode. These driving modes can be switched via voice commands. ECO mode: The main principle of ECO mode is not very complicated. It primarily involves a comprehensive judgment and analysis of factors affecting fuel consumption during vehicle movement, such as automatic transmission gear position, engine speed, vehicle speed, braking, and transmission oil temperature. The ECU control unit calculates the optimal fuel amount to provide to the engine, effectively reducing fuel consumption compared to normal driving mode. Standard mode: In general, the Standard mode is sufficient for most situations. If driving in the city, it is recommended to use Standard mode. For highway driving, the ECO mode is suggested as it is more fuel-efficient. However, for overtaking on the highway, Standard mode is recommended. Sport mode: Sport mode increases the engine speed to 3,000 RPM or even higher, ensuring the car maintains sufficient torque for quick acceleration and deceleration, fully highlighting the vehicle's performance and delivering the legendary "push-back feeling." Other characteristics include a stiffer suspension, greater support, increased throttle sensitivity, and enhanced engine air intake, though this also leads to higher fuel consumption.
20
0
Share

Does the Teramont have a particulate filter?

The Teramont is equipped with a particulate filter. The Diesel Particulate Filter (DPF) is a ceramic filter installed in the diesel engine's emission system, which captures particulate emissions before they enter the atmosphere. The captured particles are subsequently burned off during vehicle operation. Taking the 2021 Teramont 330TSI 2WD Luxury Edition as an example, this is a mid-to-large SUV launched by SAIC Volkswagen. It measures 5052mm in length, 1989mm in width, and 1773mm in height, with a wheelbase of 2980mm. It is powered by a 2.0T turbocharged engine with a maximum power output of 137kW, paired with a 7-speed dual-clutch transmission.
8
0
Share

What does Haval's GDIT mean?

Haval's GDIT refers to a turbocharged direct injection engine. Taking the 2021 Haval H6 third-generation 2.0T automatic two-wheel drive Max as an example, its body dimensions are 4653mm in length, 1886mm in width, and 1730mm in height, with a wheelbase of 2738mm. The Haval H6 has a 5-door, 5-seat SUV body structure, equipped with a 2.0T turbocharged engine, paired with a 7-speed dual-clutch transmission. The drive type is front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension. The power steering type is electric power steering, and the tire specification is 225/55R19.
14
3
Share

How to Clean Carbon Deposits in Cars?

Engine disassembly and cleaning is the most effective method for removing carbon deposits. In addition to engine disassembly, there are several other methods to clean carbon deposits in cars: 1. Using a fuel injection cleaner. Hang a bottle tool above the engine, pour the cleaning agent into the bottle tool, and then introduce it into the engine through a conduit to achieve the purpose of cleaning carbon deposits. If the engine has severe carbon deposits, this method may cause blockage or damage to the catalytic converter system. 2. Machine cleaning. Inject the cleaning agent into a machine, then pressurize it into the combustion chamber, allowing the cleaning agent to react with and dissolve the carbon deposits, and then extract the waste liquid. This method is quite effective for severe carbon deposits and does not require engine disassembly. Methods to reduce carbon deposit formation: 1. Use high-quality fuel. Since the main components of carbon deposits are wax and gum deposits from the fuel, the lower the gum content in the fuel, the better. Although we cannot change the quality of the fuel, we can choose to avoid adding low-quality fuel of unknown origin. 2. Avoid driving at low RPM for extended periods. If necessary, you can periodically drive at high speeds. The principle of using high-speed driving to remove carbon deposits is to increase the gas flow speed, which can remove a small portion of loosely attached carbon deposits, and to raise the combustion temperature, allowing some carbon deposits in the cylinders to be burned off.
10
4
Share

Why doesn't the oil dipstick show after adding oil to an Audi car?

Audi models do not have an oil dipstick and need to check the oil level information through the central display. How to use the oil dipstick: Before checking, prepare a tissue and find the handle of the oil dipstick in the engine compartment; pull out the oil dipstick and use the tissue to wipe off the oil stuck to the dipstick head as much as possible. At this point, you can clearly see the scale marks on the oil dipstick; insert the cleaned oil dipstick back into place, making sure to push it all the way in, and then pull it out again. Note that when pulling out the oil dipstick, pay attention to the way you hold it. You can hold it vertically, tilted, or horizontally, but not upside down, as this will cause the oil on the dipstick to flow backward, affecting the accuracy of the oil level reading; check the oil stuck to the dipstick to determine the oil level position. If the oil level is below the MIN lower limit or above the MAX upper limit, it means the engine oil needs to be topped up or there is excess oil. Precautions when using the oil dipstick: It is not recommended to check the oil dipstick when the engine is hot. This is because, while the engine is running, the oil flowing between various components has not yet returned to the oil pan, which will result in a lower oil level reading on the dipstick.
14
2
Share

How Often Should a Motorcycle Chain Be Cleaned?

Motorcycle chains should be cleaned every 2,000 to 3,000 kilometers. During use, the chain is exposed to external environmental factors, causing debris such as dirt and dust to accumulate on its surface. This necessitates cleaning; otherwise, the subsequent lubrication process cannot be properly performed. A motorcycle is a two- or three-wheeled vehicle powered by a gasoline engine and steered by handlebars that control the front wheel. It is lightweight, agile, and fast, widely used for patrols, passenger and cargo transport, and also serves as sports equipment. Broadly speaking, motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.