How to Install the Wiper Blades on the Lingpai?

Which Way to Loosen Tire Bolts?

For passenger cars, it's left to loosen and right to tighten. For large trucks, the left-side tires are left to tighten and right to loosen, while the right-side tires are right to tighten and left to loosen. Below is the relevant information: 1. Direction of tire bolts: For passenger cars, tire bolts loosen counterclockwise. For large trucks, the left and right sides differ—the left side (driver's side) has reverse threads, while the right side has standard threads. This means tightening follows the vehicle's forward rolling direction, while loosening follows the reverse direction. 2. Wheel hub bolts: Wheel hub bolts are high-strength bolts that connect the wheels to the vehicle. They attach to the wheel hub unit bearings. Typically, compact cars use 10.9-grade bolts, while medium and large vehicles use 12.9-grade bolts.

8

2

Share

What Causes a Car's Radiator to Boil Over?

Introduction to the causes of a car radiator boiling over: 1. Hot weather; 2. Overloaded air conditioning system; 3. Malfunctioning cooling components. Car boiling over usually refers to when the engine (also known as the motor or internal combustion engine, which is further divided into diesel and gasoline engines based on the type of fuel burned and ignition method) reaches a temperature that is excessively high for its normal operating range, affecting the machine's performance and potentially causing damage. Here are some solutions: 1. Conducting a comprehensive inspection of the car's cooling system is the primary method to prevent boiling over: check if the cooling fan is working properly, if the radiator is leaking, or if there is a lack of coolant. If the radiator is leaking, it should be repaired or replaced promptly. 2. If the radiator is low on fluid, it should be replenished immediately: if the coolant appears cloudy or deteriorated, it should be replaced.

10

4

Share

How to Check Whether a Vehicle Meets China 5 or China 6 Emission Standards?

Methods to check whether a vehicle meets China 5 or China 6 emission standards include: 1. Check the vehicle's factory certificate; 2. Refer to the vehicle's environmental standard list; 3. Examine the vehicle conformity certificate. The differences between China 5 and China 6 are: 1. Different carbon monoxide emission levels: China 5 allows 1000mg; China 6 allows 700mg. 2. Different emission limits: China 5's limit is 0.0045 grams per kilometer; China 6's limit is 0.25 grams per kilometer. China 5, fully named as the National Fifth Stage Motor Vehicle Pollutant Emission Standard, and China 6, fully named as the National Sixth Stage Motor Vehicle Pollutant Emission Standard, both regulate the content of harmful gases such as carbon monoxide, hydrocarbons, nitrogen oxides, particulates, and soot emitted from vehicle exhaust.

18

0

Share

How to Turn Off the Screen in Tesla Camp Mode?

Open the driver's side door of the Tesla vehicle and press the one-touch start button. Hold down the lock button on the driver's door of the Tesla vehicle for more than 10 seconds to shut down the system.

19

1

Share

What does it mean to have the car title held for three years when buying a car?

When the car title is held for three years, such a vehicle falls under the category of mortgaged car procedures. Below is a related introduction to car mortgages: 1. Definition: A car mortgage loan is a loan obtained from a financial institution or auto consumer finance company using the borrower's or a third party's car or self-purchased vehicle as collateral. The primary purpose of using a car as collateral is for quick capital turnover. 2. Considerations: Most car mortgage loans follow the principle of 'mortgaging the documents but not the car,' meaning that you can obtain the loan by mortgaging the relevant documents of your car to the lending institution, while the car can still be used normally after installing a GPS. Therefore, before proceeding with the mortgage, it's advisable to first understand whether the car mortgage requires the car to be held as collateral, which can help avoid institutions that require the car to be held.

7

1

Share

How to Replace Spark Plugs on a Sail?

The steps to replace spark plugs on a Sail are: 1. Remove the spark plug cap when the engine is cold; 2. Unscrew the old spark plug counterclockwise; 3. Screw in the new spark plug clockwise; 4. Reattach the spark plug cap; 5. After replacing the spark plugs, check for any errors and test start the engine. The Sail is a compact 4-door, 5-seater sedan under the Chevrolet brand. Its body dimensions are: length 4300mm, width 1735mm, height 1504mm, with a wheelbase of 2500mm, a fuel tank capacity of 35 liters, and a trunk capacity of 366 liters. The Sail is equipped with a 1.3L engine, delivering a maximum power of 76 kilowatts at 6000 rpm, and a maximum torque of 127 Newton-meters at 4000 rpm.

8

4

Share

How to Install the Wiper Blades on the Lingpai?

Which Way to Loosen Tire Bolts?

What Causes a Car's Radiator to Boil Over?

How to Check Whether a Vehicle Meets China 5 or China 6 Emission Standards?

How to Turn Off the Screen in Tesla Camp Mode?

What does it mean to have the car title held for three years when buying a car?

How to Replace Spark Plugs on a Sail?

How to Read the Engine Oil Dipstick in a Car

How to Open the Hood of the Tiguan L?

What happens if the supercharger bypass valve rod is adjusted shorter?

What does SVS on the dashboard mean?