How to Install the Seat Covers for Roewe i5?

[DiAriel]

The method to install the seat covers for Roewe i5 is as follows: 1. Connect the clamp to the elastic band; 2. Insert the slot into the gap of the seat, then pull the clamp out from behind the seat; 3. Link the elastic band to the metal hook; 4. Fix the metal hook at the bottom of the seat. The body dimensions of Roewe i5 are: length 4601 mm, width 1818 mm, height 1489 mm, with a wheelbase of 2680 mm and a trunk capacity of 512 liters. The Roewe i5 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 124 kW and a maximum torque of 250 Nm, paired with a 7-speed dual-clutch transmission.

[EvangelineAnn]

Installing the seat covers for the Roewe i5 is quite simple. I've done it myself several times. Just remember to choose the right size that matches your car model—don't buy ones that are too big or too small. Start by fitting the cover from the top of the front seat, tighten the back part, and gradually cover the entire seat. Then, check if the bottom of the seat cover has hooks or straps, and use them to secure it to the metal hooks or gaps under the seat. Pay special attention to the side airbag openings—make sure the seat covers don’t block them, as this could prevent the airbags from deploying in an emergency, compromising safety. Wear gloves during installation to avoid scratching the seat leather. After installation, sit down to test and adjust the straps to ensure they don’t come loose. By the way, regularly washing the seat covers can extend their lifespan and keep the car interior smelling fresh. The Roewe i5 has a simple interior, so light-colored seat covers can make it look brighter. Don’t rush the process—it takes about half an hour to complete, saving you the cost of a repair shop.

[FernandoMarie]

The first time I installed seat covers on my Roewe i5, I was a bit flustered, but later summarized the key points: First, read the seat cover instructions to confirm the correct orientation. Usually, start by fitting the front seat covers, grab the front edge and pull it down to wrap the seat, align the back part and then pull it tight. Next, locate the fixing straps or Velcro under the seat and fasten them securely to the hooks to prevent displacement while driving. An important reminder is to leave the side airbag area uncovered—seat covers usually have marked holes that should be aligned for safety. Before installation, prepare a helper to hold the seat to reduce pulling. After finishing, press the covers with your hands to test stability. As a bonus tip, choose anti-slip material for seat covers to avoid slipping. The Roewe i5's seat design is smooth, and well-fitted seat covers can protect the original seats from wear, making long-distance driving more comfortable.

[DeMalachi]

The key to installing Roewe i5 seat covers is ensuring safety first. I once encountered an issue where the seat cover blocked the airbag, so during installation, carefully check if the airbag holes align with the side markings on the seat. First, fit the entire seat cover, smooth it out, then secure the bottom straps—avoid over-tightening to prevent damage to the seat structure. Opt for professional seat covers to minimize risks, and test the airbag functionality after installation. Simple steps save time and hassle.