How to install the seat belt in Wuling Rongguang?
1 Answers
The installation of the rear seat belt in Wuling Rongguang requires that the angle between the shoulder strap of the seat belt and the horizontal line of the seat back should not exceed 45 degrees, and the maximum angle with the center line of the seat should be 20 degrees. The following is a detailed introduction to the installation of the rear seat belt in Wuling Rongguang: 1. Installation of the waist belt: When installing the waist belt, it should be noted that the two fixing points of the waist belt should be installed on the vehicle floor, seat frame, or side wall of the vehicle body. The position of the fixing point on the floor is related to the sitting point on the seat. The angle between the waist belt fixing point and the sideline and the horizontal reference line of the vehicle body should be as close to 45 degrees as possible. In addition, all positions within the seat adjustment range can be adjusted. This angle must be within a safe range. 2. Installation of the shoulder strap: The position range of the upper fixing point of the shoulder strap has been stipulated in relevant civil industrial standards and should be followed accordingly. The distance from the shoulder strap fixing point to the center line of the seat should not be less than 140mm. 3. Installation of accessories: Whether the installation position of accessories is appropriate or not is one of the important conditions that determine whether the seat belt can function effectively. Generally, it is required that the horizontal distance between the two lower installation accessories of the two-point and three-point seat belts should not exceed 350mm, and the distance between these two installation accessories and the center line of the seat should be as equal as possible.
