How to install the rearview mirror of Baojun 730?

[AlinaLynn]

The steps to install the rearview mirror of Baojun 730 are: 1. Use AB glue to firmly adhere it to the front windshield; 2. Press the black base along the slot from top to bottom against the front windshield to fix it in place. The body dimensions of Baojun 730 are: length 4780mm, width 1780mm, height 1740mm, wheelbase 2750mm, fuel tank capacity 52L, and the body structure is a 5-door 7-seat MPV. Baojun 730 is equipped with a 1.5T turbocharged engine, with a maximum power of 108kW and a maximum torque of 250Nm, paired with a 6-speed manual transmission.

[Baker]

I previously replaced the rearview mirror on my Baojun 730 myself, and it felt quite straightforward. First, disconnect the negative terminal of the battery to prevent short circuits and potential injury. Next, unscrew the screws on the interior door panel using a Phillips screwdriver and carefully remove it. Then, locate the fixing screws of the old mirror, loosen them, and disconnect the wiring connector—it’s best to take photos to remember the plug colors clearly to avoid incorrect reconnection. Align the new mirror in position, connect the wires ensuring red matches red or corresponding colors, and wrap them tightly with insulating tape to prevent water ingress and electrical leakage. Finally, tighten the screws without over-torquing, reinstall the door panel, reconnect the battery, and test the mirror angle adjustment. The whole process takes about an hour. Beginners are advised to seek help from someone experienced to avoid damaging the door wiring, which could lead to bigger issues. Remember to test the mirror’s power adjustment or heating functions afterward—this is crucial for driving safety, especially during rainy or nighttime conditions.

[KateFitz]

As an owner of the Baojun 730, I accidentally damaged the side mirror last time and decided to replace it myself. All you need are basic tools like a screwdriver and insulating tape. First, turn off the engine and disconnect the positive terminal of the battery to avoid electric shock risks. Then, remove the plastic cover on the inner side of the door to expose the screws, unscrew them to take off the old mirror, and gently unplug the wiring connector without pulling too hard. When installing the new mirror, align it properly, connect the wires, and carefully seal the connections with tape. Tighten the screws but don’t over-tighten them. After everything is installed, reconnect the power and test the mirror's functionality. If you're not familiar with the wiring, you might blow a fuse, so it's recommended to have a technician check the connections during regular maintenance to ensure they haven’t deteriorated, saving time and ensuring safety and reliability.

[SophiaLynn]

Last month, my old rearview mirror broke, and my son helped me replace it with a new one. First, disconnect the battery, use a screwdriver to remove the door trim panel, locate and unscrew the old mirror. When unplugging the wires, remember the color sequence or take photos for reference. Install and secure the new mirror, reconnect the wires, and wrap them with tape to avoid short circuits. Finally, reconnect the battery and test the adjustment. The whole process is quite straightforward, but if you're unsure about the wire connections, it's better not to attempt it yourself to avoid electric shock. Seeking a professional repair shop is safer and ensures proper driving visibility.

[MacJesse]

When installing the Baojun 730 rearview mirror, be cautious with the wiring connections. I used a Phillips screwdriver and disconnected the battery first to prevent accidents. Remove the decorative panel, unscrew the old mirror, and unplug the wiring connector, noting the wire colors to avoid reverse connection and short circuits. Align the new mirror properly, reconnect the wires in their original order, and seal the connections with insulating tape. Before testing, check that the mounting screws are secure, start the vehicle, and adjust the mirror functions to ensure everything works properly. If the wires are exposed, they can easily get wet and corrode the insulation, so it's recommended to add protective sleeves at the connections to extend their lifespan. Keeping the environment dry during the operation is crucial, as moisture can damage the system and compromise driving safety.

[JasonRose]

I prioritize driving safety. When installing the Baojun 730 rearview mirror, first disconnect the battery. Common screwdrivers are sufficient for the tools. Remove the trim panel, unscrew and take out the old mirror, then unplug the connector and take photos to document the wiring sequence. After installing the new mirror, carefully connect the wires and wrap them with tape, then secure and test the angle and functionality. If you're unfamiliar with electrical operations, improper installation may cause hidden dangers, affecting side visibility and increasing accident risks. It's best to prepare protective gloves in advance to keep the operation clean, or simply go to a reliable repair shop for a hassle-free and efficient solution. Regular inspections can help detect issues early and avoid disruptions to daily use.