How to install the rear seat cushion of Haval H6?

How Long Does the Envision Battery Last?

Envision battery life is 3-4 years. Here is some information about the Envision battery: 1. Introduction: The battery model is 6-QF-70AGMH6, an AGM maintenance-free battery. If the battery is found to be undercharged or leaking, it should be replaced; otherwise, it may cause the vehicle to fail to start or result in a loss of power to the vehicle's electrical loads. 2. Replacement Conditions: The battery should be replaced when it is severely undercharged and cannot be recharged, or if there are signs of aging or corrosion on the surface. 3. Precautions: To ensure the proper functioning of the start-stop system, it is recommended to use the original factory-configured battery when replacing it. This is because the sensors monitoring the battery status and the electronic control system are calibrated according to the technical parameters of the original factory-configured battery.

12

4

Share

Why is the production date of the new car's window glass inconsistent?

Glass from different batches naturally has different production dates, so it is very normal for the production dates of the new car's window glass to be inconsistent. Below is a detailed introduction to the coding of automotive glass: 1. Date reading method: Numbers represent the year, small dots represent the quarter (there are 4 quarters in a year, so the maximum number of small dots is 4), and large dots represent the month within the quarter (a quarter consists of 3 months, so the maximum number of large dots is 3). 2. 3C Certification: The authenticity of the glass determines its shatter resistance and the extent of harm to people if it breaks. A qualified automotive glass product must have 3C certification, and this 3C certification mark must be clear and extremely difficult to scrape off with a fingernail or blade.

12

1

Share

In which year did China V vehicles come out?

China V emission standard vehicles started production in 2012. The China V emission control level is equivalent to the European Stage 5 emission standard. The specific regulations of the China V emission standard are as follows: 1. Carbon monoxide emission standard: The carbon monoxide emitted per kilometer driven must not exceed 1000 milligrams. 2. Non-methane hydrocarbon emission standard: The non-methane hydrocarbons emitted per kilometer driven must not exceed 68 milligrams. 3. Nitrogen oxide emission standard: The nitrogen oxides emitted per kilometer driven must not exceed 60 milligrams. 4. PM particulate matter emission standard: The PM particulate matter emitted per kilometer driven must not exceed 4.5 milligrams.

5

Share

How Long Does It Take to Apply Car Window Film?

Car window film application typically takes about three days in summer before the vehicle can be used normally, while in winter, it may require up to seven days. Here are some precautions for car window film application: 1. Ensure that the sunroof is not opened within three days after the film is applied. 2. When parking the vehicle, choose a sunny location to allow sufficient evaporation of moisture trapped under the film. Benefits of car window film include: 1. Heat and sun protection: The film effectively blocks a significant amount of infrared heat. 2. UV protection: Medium and long-wave ultraviolet rays can penetrate thick glass, but applying heat-insulating film can block most UV rays, preventing skin damage and reducing the aging of car interiors. 3. Safety and explosion-proof: The base layer of the film is made of polyester, which is highly resistant to tearing and puncturing. Combined with the adhesive layer, the film enhances the strength of the glass, preventing injuries caused by accidental breakage. 4. Creating a private space: By selecting the appropriate type of film, the interior of the car becomes difficult to see from the outside while maintaining clear visibility from the inside, ensuring privacy and safety.

6

2

Share

Where is the battery located in a Mercedes-Benz sports car?

Mercedes-Benz sports car battery is located in the trunk of the vehicle, near the spare tire, with a dedicated cover on top. Here are some precautions regarding the Mercedes-Benz sports car battery: 1. Turn off all lights before shutting down the engine: Some older models do not support the automatic power-off function after the engine is shut down, so you need to manually turn off the headlights and interior reading lights before shutting down. If you need to find something in the car or need lighting, you can use a mobile phone or flashlight for illumination, so as not to forget to turn off the reading light, causing battery power loss. 2. Turn off the air conditioning and audio before shutting down the engine: The air conditioning system involves the compressor and blower, and the audio is also a high-power electrical device. If they are not turned off before shutting down, they will automatically start the next time the vehicle is started, which will cause a heavy burden on the battery and damage it. Especially for some music enthusiasts who have modified the car audio, the usual power consumption increases, and the impact on the battery during startup will be greater. Therefore, whether it is temporary parking or long-term parking, the air conditioning and audio should be turned off before shutting down the engine.

19

1

Share

What material does vehicle steel plate belong to?

Automotive steel plates are classified into hot-rolled steel plates, cold-rolled steel plates, and coated steel plates based on production process characteristics. From the perspective of strength, they can be divided into: ordinary steel plates (mild steel plates), high-strength low-alloy steel plates (HSLA), ordinary high-strength steel plates (high-strength IF steel, BH steel, phosphorus-containing steel, and IS steel, etc.), and advanced high-strength steel plates (AHSS). Different components have different requirements for steel plates: 1. Panel components: Panel components require the steel plates to have good formability, strength, ductility, dent resistance, and corrosion resistance. 2. Structural components: Structural components require the steel plates to have good formability, strength, collision energy absorption capacity, durability, corrosion resistance, and weldability. 3. Running components: Running components require the steel plates to have good formability, rigidity, fatigue durability, corrosion resistance, and weldability.

6

4

Share

How to install the rear seat cushion of Haval H6?

How Long Does the Envision Battery Last?

Why is the production date of the new car's window glass inconsistent?

In which year did China V vehicles come out?

How Long Does It Take to Apply Car Window Film?

Where is the battery located in a Mercedes-Benz sports car?

What material does vehicle steel plate belong to?

How to Handle Sudden Engine Stalling While Driving

What insurance do I need to buy for a new car?

What is the most suitable tire pressure in summer?

What Causes the Car Engine Temperature Warning Light to Illuminate?