How to Install the Headlight Bulb of Vios?

[VanCora]

Vios headlight bulb installation method is as follows: 1. Unplug the power socket of the bulb. When unplugging the bulb power socket, apply moderate force to avoid loosening the socket wiring or damaging the bulb plug. 2. After disconnecting the power interface, remove the waterproof cover behind the bulb. The material of the headlight waterproof cover is mostly soft rubber, and some models are equipped with soft plastic waterproof covers, which are no different. Just apply a little force to remove the waterproof cover. 3. Remove the bulb from the reflector. When removing the bulb, use your fingers to pinch the steel wire clips on both sides. Once the bulb is loosened, pull it out. 4. Place the new bulb into the reflector, aligning the fixed slots on the bulb base. There are several fixed slots on the bulb base. Install the new bulb by reversing the steps of removing the old bulb: pinch the steel wire clips to insert the bulb into the reflector, align the installation position, and then release the clips to secure the bulb. 5. When covering the waterproof cover, ensure that the edge of the waterproof cover is completely fitted with the fixed position. Finally, connect the headlight power socket, and the operation of replacing the headlight is completed.