How to install the cigarette lighter in Tiggo 3?
2 Answers
The installation method of the Tiggo 3 cigarette lighter is: insert the cigarette lighter into the socket, which is normally in the closed state. Continue to press it down, and the cigarette lighter will be locked and start heating up. When you hear a click, the cigarette lighter will pop back to its original position, and you can then take it out for use. The cigarette lighter is a component found in all cars, designed to provide a convenient fire source for drivers who smoke. The cigarette lighter socket can also be used as a power source, such as for heated seat cushions, police lights, mobile phone chargers, and other devices. The Tiggo 3 is a compact SUV under the Chery brand, with body dimensions of 4420mm in length, 1760mm in width, and 1670mm in height, and a wheelbase of 2510mm.
I modified the cigarette lighter on my Tiggo 3, and the installation was quite straightforward. First, disconnect the vehicle's power by removing the negative battery terminal to avoid electric shock hazards. Then locate the original cigarette lighter position, usually in the center console area or under the dashboard. Use a flat-head screwdriver to gently pry open the panel clips—avoid using excessive force to prevent scratching the interior. After removing the old cigarette lighter, take out the new cigarette lighter kit, which typically has two wires (red and black): the red positive wire needs to be connected to a 12V power source—I prefer connecting it to an empty slot in the fuse box and securing it with crimp terminals; the black negative wire must be properly grounded by tightening it to a metal bolt on the car body. After connecting, use a multimeter to test for power. If everything checks out, reinstall the panel and tighten the screws. The whole process takes about 20-30 minutes, requiring only a screwdriver, pliers, and electrical tape. Beginners should avoid short-circuiting the wires and consult the vehicle manual to confirm the location before installation. After installation, test the heating function to ensure proper operation, and you’ll have safely installed a new cigarette lighter.
