How to install the belt on Cadillac XTS?

1 Answers
Beth
07/30/25 5:23am
Installation method for the Cadillac XTS belt: Loosen the generator fixing screw and the belt tension adjustment screw, then push the generator towards the engine to minimize the distance between the pulleys. Next, place the belt properly, adjust the belt tension to the appropriate level, and finally tighten the engine fixing screw and the adjustment screw. The XTS is a large and medium-sized sedan under SAIC-GM-Cadillac. Taking the Cadillac XTS 2018 28T Luxury model as an example, its body dimensions are 5103mm in length, 1852mm in width, and 1502mm in height, with a wheelbase of 2837mm. The body adopts a 4-door, 5-seat sedan structure with a fuel tank capacity of 70 liters. In terms of power, the Cadillac XTS 2018 28T Luxury model is equipped with a 2.0L inline 4-cylinder turbocharged engine, with a maximum power of 198kW and a maximum torque of 353Nm, matched with a 6-speed automatic manual transmission.
Was this review help?
4
2
Share
More Forum Discussions

What Does Comprehensive Motor Vehicle Damage Insurance Cover?

Comprehensive vehicle damage insurance is a broader coverage variant of standard vehicle damage insurance, incorporating combined insurance elements. It consists of the primary vehicle damage insurance supplemented by additional coverages such as body scratch insurance and glass breakage insurance. Motor vehicle damage insurance refers to the insurer's compensation for the damage or loss of the insured vehicle caused by accidents within the coverage scope. The following are circumstances under which the insurer will not be liable for compensation, regardless of the cause: 1. Earthquakes, wars, military conflicts, terrorist activities, riots, seizures, confiscations, or government requisitions; 2. Participation in competitions or tests, or during repair and maintenance at commercial service facilities; 3. Use of the insured vehicle for illegal activities.
14
4
Share

Is Car Light Modification Illegal?

Unauthorized modification of car lights is illegal. Below are the specific regulations for car light modification: 1. Color temperature requirement: The color temperature must not exceed 6000k. If it exceeds 6000k, the value cannot be detected during inspection, and the vehicle will fail the annual inspection. 2. Must not affect other road users: According to the regulations in the Road Traffic Safety Law, vehicle driving must not affect other road traffic participants. The light source of the headlights must not disturb others, and when modifying headlights, integrated headlights should be installed. 3. Brightness requirement: The brightness must not be too low, and the illumination of the low beam must be above 1200 lumens.
6
0
Share

What car is the Volvo logo?

The logo of Volvo represents Volvo cars. Relevant information is as follows: 1. Brand: Its models include Volvo XC60, Volvo S90, Volvo XC90, Volvo S60, Volvo V60, etc. 2. Body: The Volvo XC60 has a length, width, and height of 4688mm, 1902mm, and 1658mm respectively, with a wheelbase of 2865mm. The Volvo XC60 features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0 turbocharged engine, delivering a maximum horsepower of 190ps, a maximum power of 140kw, and a maximum torque of 300nm, paired with an 8-speed automatic transmission.
17
2
Share

How to Clear the Maintenance Reminder on Volkswagen Vehicles?

Here are the steps to remove the maintenance reminder on Volkswagen vehicles: 1. After turning off the car, press and hold the set button on the right side of the dashboard; 2. Turn on the ignition, release the set button, and then press it again to cancel the reminder. Here are some related details: 1. Taking the 2021 Volkswagen Lavida Comfort Edition as an example, it is a compact 4-door, 5-seater sedan with body dimensions of 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. 2. The 2021 Volkswagen Lavida Comfort Edition is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110kW and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
16
4
Share

Which company manufactures the engine for the Dorcen G60s?

The engine of the Dorcen G60s is produced in Jiangxi. The G60s is a compact SUV under the Dorcen brand, with a wheelbase of 2680 mm, and dimensions of 4521 mm in length, 1840 mm in width, and 1672 mm in height. Below is the relevant introduction of the Dorcen G60s: The G60s is equipped with a 1.5-liter turbocharged four-cylinder engine across all models. This engine has a maximum power of 120 kW, a maximum torque of 230 Nm, with the maximum torque range between 1750 to 4500 rpm, and the maximum power achieved at 5500 rpm. The engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head with a cast iron cylinder block.
18
0
Share

What are the models of cranes?

The models of cranes include: 1. Light and small cranes: jacks, pneumatic hoists, electric hoists, balance hoists (also known as balance cranes), winches, etc. 2. Bridge-type lifting machinery: such as beam cranes. 3. Jib-type cranes: such as fixed slewing cranes, tower cranes, truck cranes, tire cranes, crawler cranes, etc. 4. Cable cranes: such as elevators. Information about cranes is as follows: 1. Crane: refers to a multi-action lifting machine that vertically lifts and horizontally moves heavy objects within a certain range. 2. Characteristics: The working characteristic of a crane is intermittent movement, that is, in a working cycle, the corresponding mechanisms for actions such as picking, moving, and unloading are alternately working.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.