How to Install the Belt on a Buick Excelle?

1 Answers
LeilaniLee
07/29/25 5:25pm
Buick Excelle belt installation method is: Align the ignition marks of the crankshaft and camshaft; Place the belt on the crankshaft pulley, then run it upwards from the side opposite the tensioner pulley and place it on the camshaft pulley; Then fold the belt into the side of the tensioner pulley and tighten the tensioner. The belt is an important part of the engine's valve timing system, ensuring accurate intake and exhaust timing by connecting to the crankshaft and maintaining a specific gear ratio. The Excelle is a compact sedan with dimensions of 4609mm in length, 1798mm in width, and 1464mm in height, a wheelbase of 2640mm, and is equipped with a 1.5L naturally aspirated engine producing a maximum horsepower of 113 and a maximum torque of 141 Nm.
Was this review help?
8
1
Share
More Forum Discussions

What is the use of ETC Bluetooth mode?

The Bluetooth function of ETC can only be used when activating the ETC device or recharging the ETC. When using ETC on the highway, there is no need to turn on the car Bluetooth or mobile phone Bluetooth. The ETC junction box installed in our car has a short-range communication response system inside, which will automatically communicate with the sensors on the road, and our car and mobile phone do not need to turn on Bluetooth. ETC is the abbreviation of Electronic-Toll-Collection, which means electronic toll collection system. To apply for ETC, you need to provide the original and photocopy of the owner's valid ID card and driving license. If it is not the owner himself who handles it, you also need to bring the agent's valid ID card. The copy of the driving license needs to photocopy the page with the seal of the latest annual inspection; a bank card used to deduct highway tolls; aged 18 to 60; a car under personal name. The working principle of ETC: Through the on-board electronic tag installed on the windshield of the vehicle, it communicates with the microwave antenna in the ETC lane of the toll station, and uses computer networking technology to settle accounts with the bank in the background, so that the vehicle can pay the highway or bridge toll without stopping when passing through the highway or bridge toll station. Benefits of installing ETC: Save time: avoid the trouble of queuing and waiting; Green and environmental protection: green and low-carbon, vehicles pass through the toll station without stopping, which can reduce noise and exhaust emissions and pollution; Save loss: save costs, reduce the frequency of vehicle starting and braking, and reduce wear and fuel consumption; Improve efficiency: The traffic efficiency of ETC lanes can theoretically be increased by more than 2-3 times, making traditional ETC updated, faster and more high-tech. Compared with license plate payment, ETC technology is more mature and has more advantages.
10
1
Share

What Causes the Engine Malfunction Light to Flash Yellow?

When the engine malfunction light flashes, it indicates a fault in the engine, and the issue is relatively severe, requiring immediate inspection. The specific reasons may include the following seven: Sensor malfunction: The sensors referred to here include those for coolant temperature, crankshaft position, air flow, intake temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, which will trigger the engine malfunction light. Fuel quality issues: If fuel and engine oil are not added according to the manufacturer's requirements, it may cause engine wear and trigger the malfunction light. Poor combustion of the air-fuel mixture: Poor combustion can lead to engine carbon deposits or knocking. When detected by the oxygen sensor and reported to the ECU, the malfunction light will illuminate as a warning. Issues such as spark plug failure, ignition coil failure, fuel pump failure, or fuel line blockage can all cause poor combustion of the air-fuel mixture. Turbocharging issues: The intake turbocharging pipeline and turbocharger can also trigger the engine malfunction light. The most common issue is turbocharger damage, accompanied by symptoms such as oil leakage, high oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake issues: If there is a problem with the vehicle's intake, it may lead to engine pipeline blockage, and in severe cases, trigger the engine malfunction light. A dirty or uncleaned air filter can cause intake problems. Exhaust issues: Exhaust faults can also trigger the engine malfunction light. Common causes include rear oxygen sensor failure, catalytic converter issues, exhaust camshaft and bearing faults, with the catalytic converter being the most frequent. Using leaded gasoline, lead or silicon-containing lubricant additives, physical damage to the catalytic converter, or fuel system faults can easily cause catalytic converter failure. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails or the anti-theft controller does not match the engine electronic controller, the anti-theft system can prevent the engine from operating normally, and the malfunction light will illuminate. Generally, the engine malfunction light can display four states: steady yellow, flashing yellow, steady red, and flashing red. The severity of the fault increases from steady to flashing and from yellow to red. In order of severity: flashing red > flashing yellow > steady red > steady yellow. If the engine malfunction light illuminates, follow these steps: First, check whether the engine is running normally and if there are issues such as shaking or black smoke. If so, avoid restarting the engine. Particularly, do not restart the engine if the red light is on. If the engine can be started, turn it off for 5-10 minutes, then press the start button without pressing the brake, or turn the key halfway to the 'on' position without pressing the clutch. The vehicle will perform a self-check after powering on. Observe whether the malfunction light turns off after 5-10 seconds. If the light remains on, visit a service center as soon as possible. The service center can use a portable diagnostic tool to read the fault code, identify the issue, and perform targeted repairs.
20
1
Share

Can ETC be installed on a car without annual inspection?

ETC can be installed on a car without annual inspection, as ETC is not part of the annual inspection items. However, a vehicle without annual inspection cannot be driven on the road, which essentially means the ETC cannot be used either. ETC is merely a method for fast toll collection at highway entrances, designed to alleviate the pressure of manual toll collection. According to the State Council's regulations, vehicles that did not apply for or use ETC in 2020 cannot enjoy toll discounts. In the future, only one manual lane will be retained at highway toll stations, requiring vehicles to pay tolls manually. ETC deduction principle: Highways will have one or more ETC lanes. Through microwave short-range communication between the vehicle's electronic tag installed on the windshield and the microwave antenna in the ETC lane, and using computer networking technology for backend settlement with banks, the system achieves the purpose of toll payment without stopping at toll stations. This is all based on the principle of passing first and deducting fees later. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Reduces noise and exhaust emissions by avoiding stops at toll stations; Reduced wear and tear: Saves costs by decreasing the frequency of vehicle starts and brakes, thus lowering wear and fuel consumption; Improved efficiency: ETC lanes can theoretically increase passing efficiency by 2-3 times, making traditional ETC faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key city clusters should be basically achieved, and the proportion of vehicles equipped with ETC should be significantly increased." It also set a target in the main indicators of the "13th Five-Year" comprehensive transportation development plan: "By 2020, the ETC usage rate for road passenger vehicles should reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage rates for passenger vehicles, the future will also promote ETC usage for trucks and explore deeper integration of ETC systems with vehicle-to-vehicle communication, vehicle-to-road coordination, and other smart transportation developments. This will provide comprehensive travel services for vehicle owners, indicating more application scenarios will support ETC. Annual vehicle inspection items: Exterior inspection: Take the exterior inspection form to the inspection station, first verify relevant documents, and check if the third-party insurance (compulsory insurance) is valid. After document verification, the exterior inspection begins, focusing on lights, body appearance, suspension modifications, sunroof, tires, etc. Emission monitoring: Queue up for testing. Before testing, staff will conduct a preliminary check, verifying if the engine number matches the vehicle registration, briefly inspecting the exterior and condition, and then filling out the emission test form. During testing, an inspector drives the vehicle onto the line. New vehicles usually pass easily, and a qualified emission test form allows you to pay and receive the emission compliance sticker. If failed, adjustments at a repair shop and retesting are required, with another testing fee. On-line inspection: If the exterior inspection passes, queue for on-line inspection. The inspection line checks brakes, headlights (high beam), chassis, etc., taking about 5-10 minutes. After passing, you receive a computer-printed form with items like brakes, lights, and horn. Passed items are marked "0," failed ones "X." Usually, lights and brakes fail, but adjustments are available on-site. Brake adjustments require retesting, while lights only need a stamp after adjustment. Violation check: At the query window, obtain and fill out the "Motor Vehicle Regular Inspection Registration Form" using the vehicle registration. Submit the form to check for violations. If no violations, the form is stamped "Verified, eligible for inspection." If violations exist, handle them promptly with the violation notice.
11
4
Share

What is the maximum horsepower of the GTR?

The maximum horsepower of the GTR is 555ps, and it is a brand under Dongfeng Nissan. Taking the 2017 Nissan GTR as an example, it is a hard-top sports car with body dimensions of: length 4715mm, width 1895mm, height 1371mm, wheelbase 2780mm, fuel tank capacity 74l, luggage compartment capacity 315l, and curb weight 1785kg. The 2017 Nissan GTR is equipped with a 3.8T turbocharged engine, with a maximum power of 408kw and a maximum torque of 632nm, matched with a 6-speed dual-clutch transmission.
9
4
Share

Is the Lavida a Domestic Car?

Lavida is not a domestic car. Here is some relevant information about the Lavida: Introduction: The Lavida is produced by Shanghai Volkswagen and was launched in June 2008. While continuing the "dynamic and stylish" design language of the A-segment car market, the Lavida embodies a new design DNA—"fusion." Market Positioning: The market positioning of the Lavida has always been a focus for consumers. As one of the future sales cornerstones for Shanghai Volkswagen, the Lavida is positioned to compete with the best-selling compact sedans in the market, such as the Corolla.
16
4
Share

Is It Troublesome to Transfer Ownership of a Second-hand Motorcycle Purchased from Another City?

Transferring ownership of a motorcycle from another city is not troublesome, as vehicle ownership transfer can now be processed across different locations. Required Documents: You only need to bring all valid documents of the motor vehicle and the identification documents of both the buyer and seller to complete the ownership transfer procedure. It is very convenient and can be completed within one to two working days. Things to Note: Any traffic violations or unresolved accidents involving the motor vehicle must be settled. Otherwise, the ownership transfer procedure cannot be processed. After completing the transfer, you will need to either select a new license plate number or retain the original reserved plate number.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.