How to Install the Beidou Printer Paper for Trucks?
2 Answers
The installation method for the Beidou printer paper in trucks is as follows: 1. First, use professional tools to remove the original steering wheel. 2. After removing the steering wheel, use a screwdriver to loosen the screws and take off the upper and lower plastic covers. Replace them with the new multifunctional steering wheel. 3. After installing the steering wheel, reconnect the electronic wiring to the corresponding positions. Once in place, tighten the fixing screws on both sides. 4. Pair the new components to ensure the newly installed parts function properly. 5. Use the 'Vehicle Diagnosis and Maintenance Information System' to clear any fault codes in the vehicle, ensuring successful pairing and performing a self-check on the vehicle's computer.
As a veteran truck driver with years of experience, installing Beidou printer paper is actually quite simple, but you need to pay attention to details to avoid mistakes. First, turn off the Beidou device's power before starting—safety comes first. Gently pry open the printer cover, being careful not to use too much force and damage it. Remove any remnants of the old paper roll and clean out any dust while you're at it. The new paper roll is usually thermal paper; take it out of the packaging and check if there's an arrow indicating the direction. If there's no arrow, place the smooth side facing the print head. Insert the roll into the paper slot, pull the end slightly through the guide slot to the exit, ensuring it's straight and not curled. Close the cover firmly until you hear a click, then turn on the power and test print a report to check the clarity. If the paper is inserted the wrong way, the print will be blurry, wasting paper and causing trouble. Replacing the paper every three months can prevent paper jams, and using original-quality paper will last longer. Always keep a few spare rolls in the truck—don’t overlook this during long-distance hauls.
