How to Install the Air Filter for Wuling Mini Truck?
2 Answers
Wuling Mini Truck air filter installation method is as follows: 1. The air filter of Wuling Mini Truck, like most vehicles, is located behind the glove box on the front passenger side. After removing the dampers on both sides of the glove box, the glove box can be taken out. 2. After removing the glove box, you will see the air blower and the air filter. Release the clip on the right side of the air filter cover, and take out the old air filter. 3. When installing the new air filter, pay attention to the arrow on the filter, which should face upwards to achieve better dust filtration. Cover the air filter cover and fasten the clip on the right side. 4. Finally, place the glove box back to its original position and fasten the dampers on both sides to the corresponding positions of the glove box.
Last time I replaced the air conditioning filter on my Wuling mini-truck myself, I found it quite simple. First, open the glove compartment on the passenger side, empty its contents, then simultaneously press and push inward on the clips on both sides of the glove compartment with both hands to remove the entire glove box. After removing it, you'll see a rectangular plastic cover, usually secured by clips, which can be gently pried open with a fingernail or a flat-head screwdriver. When removing the old filter, pay attention to the direction of the arrow on it; insert the new filter in the same direction, making sure not to install it backward. After installation, I tested the air conditioning airflow and found it much fresher than before the replacement. Doing this job myself saved me about a hundred bucks in labor costs, just remember to wear a mask because there's a lot of dust.
