How to Install Rear Seat Covers for Nissan Sylphy Classic?
3 Answers
For most vehicles, the rear seat can be flipped up by gently pulling upwards with some force. Place the seat cover over the seat and adjust its position properly. Pull the front elastic band of the rear seat cover from underneath the seat to the back and tie it with the rear elastic band. Then tighten and secure the rear strings. After neatly arranging the installed seat cover, the rear seat installation is complete. Careful installation will ensure a secure fit.
Last time when I installed the rear seat covers for my Nissan Sylphy Classic, I found the key was removing the seats. There are two metal clips under the front of the rear seat cushion. Just insert your hands into the gaps of the cushion and lift it upwards with force to remove it. The seat covers should be installed in two parts: the cushion and the backrest. First, cross the elastic bands of the cushion part and tie them to the steel bars of the base frame, then adjust the position to cover the side wings. For the backrest, you need to tuck the upper edge of the seat cover into the gaps of the seat and hook the hooks onto the metal frame to secure it. Remember to leave space for the seat belt buckles and child seat interfaces. When putting the cushion back, make sure you hear a click to confirm it's properly locked in place. The whole process takes about half an hour, and choosing elastic fabric makes it much easier.
As a seasoned driver who has changed three sets of seat covers, here's my experience: The rear seats of the Nissan Sylphy Classic are easier to install than sedans, as the cushions can be completely removed. Insert your fingers into the gap at the front edge of the cushion, feel for the buckle position, and then pull upwards firmly. Be careful not to pinch the safety buckles or heating wires. The cushion part of the seat cover can be put on like pulling up pants, with the elastic band at the bottom hooked onto the frame. For the backrest, push the seat cover firmly into the gaps of the backrest and secure it with the included hooks. The most troublesome part is aligning the headrest holes; you can remove the headrest to put on the cover. Finally, when reinstalling the cushion, press and test repeatedly. Beginners are advised to choose seat covers that come with installation videos, as most Taobao sellers now include an installation toolkit.
