How to install navigation in the Bestune X40?

1 Answers
MacHarper
07/30/25 9:21am
Method for installing navigation in the Bestune X40: First, the navigation module needs to be installed, and the glove box must be removed to expose the internal wiring harness and installation position; install the navigation module and connect the wiring; then reassemble the glove box components, screws, and side covers in the reverse order of removal; next, install the antenna; after installation, reassemble the speaker and cover panel in reverse order; after installation is complete, turn on the navigation for debugging. This car is 4310 mm long, 1780 mm wide, and 1680 mm high, with a wheelbase of 2600 mm. The Bestune X40 is rugged and stylish, with a novel exterior, a simple yet tech-savvy interior, and a dynamic, robust design style, giving the entire vehicle a sense of lightness; the hexagonal front grille, inheriting the Bestune gene, has strong recognition; the sleek and streamlined front headlights are highly distinctive, full of inspiration, appearing intelligent and dynamic.
Was this review help?
16
1
Share
More Forum Discussions

Can the ECO mode be kept on frequently?

You can frequently drive with the ECO mode on. ECO mode, also known as Economy Mode, is particularly effective for fuel saving when driving in congested urban traffic conditions. Under ECO mode operation, engine carbon buildup is essentially similar to that produced under normal driving modes, so the ECO mode can be kept on continuously. The main principle of ECO mode is not complicated. It involves comprehensive judgment and analysis of factors affecting fuel consumption during vehicle movement, such as automatic transmission gear position, engine speed, vehicle speed, braking, and transmission oil temperature. The ECU control unit then calculates the optimal fuel quantity to supply the engine for operation, effectively reducing fuel consumption compared to normal driving modes. Simply put, it controls engine speed with appropriate gear selection to minimize unnecessary fuel consumption. ECO is an abbreviation, with the Chinese translation representing Ecology (environmental protection), Conservation (energy saving), and Optimization (power). ECO mode is further divided into active ECO driving mode and passive ECO driving mode. When the ECO indicator light on the dashboard illuminates, it indicates that the vehicle's economy mode is activated. ECO mode is categorized into active and passive types. The difference lies in the fact that the active type has its own dedicated button, allowing the driver to choose whether to activate it. When the driver presses the ECO mode switch, the dashboard indicator light turns on, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. Passive ECO mode does not have a dedicated button. When the dashboard ECO indicator light illuminates, it merely serves as a reminder function. ECO automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the ECO indicator light. Most vehicles employ active ECO driving mode, meaning they have their own switch button. Therefore, during daily driving, we can keep the ECO mode on except when driving at speeds exceeding 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills. In these scenarios, activating ECO mode would not demonstrate its fuel-saving characteristics. Additionally, ECO mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 km/h, the system prioritizes speed, and ECO mode automatically deactivates. During idle parking or in N/P gear and manual mode, ECO mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and ECO mode will not operate in such cases.
11
1
Share

What engine does the Venucia Star use?

The Venucia Star is equipped with a 1.5T turbocharged engine supplied by Shenyang Aerospace Mitsubishi, making it a domestically produced engine. The engine model used in the Venucia Star is A415TD, with a maximum horsepower of 190 HP. It can deliver a maximum power output of 140 KW at 5500 RPM and a torque of 260 Nm between 1500 to 4500 RPM. Here are some daily maintenance tips for the Venucia Star's engine: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment in the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, ensuring the standard meets or exceeds the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any lubricating oil will degrade over time. After a certain mileage, its performance deteriorates, leading to various engine issues. To prevent malfunctions, change the oil periodically based on usage conditions and maintain an appropriate oil level. As oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, it may rupture the filter or open the safety valve, allowing oil to bypass the filter and carry contaminants back to the lubrication points, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls. These mix with metal particles from component wear to form sludge. When the amount is small, it remains suspended in the oil; when excessive, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Periodically use a radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures the engine operates smoothly but also extends the overall lifespan of the radiator and engine.
18
2
Share

Can Full-Time 4WD Always Stay in 4WD Mode?

Full-time 4WD does not always remain in four-wheel drive mode. The system only switches to four-wheel drive when necessary, otherwise it operates as a two-wheel drive system. It automatically shifts between two-wheel drive and four-wheel drive based on road conditions. Related information: 1. Types: Mechanical coupling full-time 4WD, electronically controlled multi-plate clutch full-time 4WD, and intelligent electronic full-time 4WD. 2. Advantages: Full-time 4WD has a simple structure, which effectively reduces costs and vehicle weight while providing some off-road capability.
13
5
Share

How to Turn on the Heating in an Audi's Air Conditioning?

Audi's heating control switch is located on the car's central console. Press the AUTO button, rotate the temperature control knob to the red zone, and turn off the AC to activate the heating. Audi's air conditioning controls are all concentrated in the lower part of the central console area. The heating system is highly effective, not only increasing the interior temperature but also serving to defog the windows. Audi is a luxury car brand under the Volkswagen Group's subsidiary Audi AG, representing high technical standards, quality, innovation, and classic car models. Audi is one of the leading car brands, with its headquarters in Ingolstadt, Germany, and branches in many countries, including China.
15
3
Share

What transmission is used in the Emgrand manual transmission?

Emgrand manual transmission uses a manual transmission independently developed and produced by Geely. The relevant introduction of the transmission is as follows: Transmission introduction: A device that changes the speed ratio and direction of movement. It is used in automobiles, tractors, ships, machine tools and various machines to change the torque, speed and direction of movement transmitted from the driving shaft to the driven shaft according to different working conditions. The gear transmission is generally composed of a box shell and several gear pairs. Function: Change the transmission ratio between the engine and the wheels, so that the engine works under the best working conditions, expand the torque and speed transmitted from the engine to the driving wheels, and obtain different speeds, so that the car can reverse and set neutral.
12
1
Share

Does Using Gas Really Harm the Engine?

Due to the low energy density of gaseous fuels, natural gas vehicles carry less fuel and have a shorter driving range compared to gasoline-powered vehicles. Most natural gas engines currently in use are modified from gasoline engines, so the power output of gasoline vehicles often decreases by about 10% to 20% after switching to natural gas. Relevant information about gasoline is as follows: 1. Introduction: Gasoline is a volatile, flammable hydrocarbon mixture liquid obtained from petroleum through distillation and cracking, used as fuel. It appears as a transparent liquid, is flammable, and has a distillation range of 30°C to 220°C. 2. Key Characteristics: The important properties of gasoline include volatility, stability, anti-knock quality, corrosiveness, and cleanliness.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.