How to Install CarLife If It's Not Available in the Car?

How to Identify a Previously Damaged Used Car?

Methods for identifying a previously damaged used car are as follows: 1. Inspect the exterior carefully: Check if the body panels have been refurbished, whether the waistline of the car appears natural, and if the production dates of the glass match the car's manufacturing date. 2. Open and close the doors for further inspection: Doors that haven't been disassembled should operate very smoothly. Doors that have been removed and reinstalled multiple times not only are difficult to open and close but also likely have damaged seals. In severe cases, the doors may not close properly without applying force. 3. Open the hood for a thorough check: Look for signs of tampering on the fender screws. Check if the putty on the wheel arches is applied evenly and neatly.

13

5

Share

Is Wheel Alignment Necessary When Installing New Tires?

Wheel alignment is not required when installing new tires. Wheel alignment is a maintenance procedure that involves adjusting the geometric angles of tire steering and suspension components to ensure tight contact between the tires and the ground. Steps for replacing new tires: 1. Use a jack to lift the vehicle to a certain height; 2. Remove the screws and take off the old tires; 3. Install the new tires and lower the jack. Situations that require wheel alignment: 1. Replacement or repair of shock absorbers or steering system; 2. Frequent driving on roads and rapid crossing of speed bumps; 3. The vehicle has been involved in a collision, or exhibits issues such as drifting, reduced steering precision, or misaligned steering wheel; 4. The vehicle drifts during driving; 5. Obvious wear on car tires; 6. Replacement of chassis or suspension components.

2

3

Share

What are the reasons for a car shaking at high speeds?

The reasons for a car shaking at high speeds: 1. Abnormal tire pressure or severe tire wear; 2. Imbalance in wheel alignment; 3. Excessive engine carbon buildup; 4. Incorrect front wheel alignment angle or excessive toe-in clearance; 5. Deformed wheel hub; 6. Loose parts in the drivetrain; 7. Bent drive shaft; 8. Deformed front axle; 9. Failed shock absorber. Solutions for a car shaking at high speeds: 1. Regularly check tire pressure and inflate or replace severely worn tires promptly; 2. Clean engine carbon buildup in time; 3. Replace the wheel hub; 4. Clean the throttle body and idle valve; 5. Add oil to lubricate the idle valve bearing.

14

1

Share

What should I do when the EPC warning light comes on?

When you notice the EPC indicator light is on, you can first try turning off and restarting the engine to see if the EPC light remains illuminated. If it turns off, there's likely no issue, and the EPC light was just affected and triggered a false alarm. If the EPC light stays on or frequently comes on, you should have the vehicle inspected and perform the necessary repairs. The reasons for the EPC warning light coming on are as follows: 1. Intake system malfunction. 2. Dirty throttle body with excessive carbon buildup. 3. Use of substandard fuel. 4. Abnormal cylinder pressure, poor engine condition. 5. Sporadic faults or false alarms. 6. Valve malfunction, sticking, or carbon buildup. 7. ECU fault.

3

4

Share

What engine does the Geely Emgrand have?

Geely Emgrand is equipped with: a 1.5L naturally aspirated engine and a 1.3T turbocharged engine. The engine is the core part of the powertrain, with its main component being the cylinder, and it serves as the power source of the entire vehicle. Taking the 2021 Geely Emgrand as an example, its body dimensions are: length 4632mm, width 1789mm, height 1470mm, with a wheelbase of 2650mm and a fuel tank capacity of 50 liters. The 2021 Geely Emgrand is powered by a 1.5L naturally aspirated engine, delivering a maximum power of 80kW at 6000rpm, and a maximum torque of 142Nm at 4400rpm, paired with a 5-speed manual transmission.

18

3

Share

Do cars need to be equipped with fire extinguishers?

Cars need to be equipped with fire extinguishers. Fire extinguishers are portable firefighting equipment that contain chemicals inside to extinguish flames. Cars are at risk of fire in hot weather, due to vehicle malfunctions, or short circuits in the wiring. A fire extinguisher can be used to put out flames, ensuring personal safety and reducing losses. How to use a fire extinguisher: 1. Pick up the fire extinguisher and position yourself upwind; 2. Turn the fire extinguisher upside down several times to loosen the dry powder inside; 3. Remove the safety pin, hold the handle with your left hand, grab the nozzle with your right hand, and turn the fire extinguisher upside down to stand upright; 4. Aim the nozzle at the base of the flame and spray.

20

2

Share

How to Install CarLife If It's Not Available in the Car?

How to Identify a Previously Damaged Used Car?

Is Wheel Alignment Necessary When Installing New Tires?

What are the reasons for a car shaking at high speeds?

What should I do when the EPC warning light comes on?

What engine does the Geely Emgrand have?

Do cars need to be equipped with fire extinguishers?

Which Hybrid Vehicles Can Get Green License Plates?

How Many Digits Does a License Plate Number Consist Of?

What is the difference between compact cars and midsize cars?

What does it mean when a car displays 'Check ESP'?