How to Install and Use a Dash Cam?

[AbelLynn]

The detailed installation steps for a dash cam are as follows: 1. Determine the optimal mounting position for the dash cam. It is recommended to install it on the right side of the interior rearview mirror, as centered as possible, to ensure a proper filming angle and higher reference value. 2. Plan the optimal wiring route based on the power cord length. 3. Tuck the power cord into the gap of the vehicle's headliner. 4. After routing the cord along the headliner, gently pull down the door seal trim. 5. Insert the cord into the door seal trim, align the A-pillar clips, and lightly tap the A-pillar trim panel into place with your fist. 6. Route the cord downward from the top of the A-pillar along the door frame, tucking it into the seal trim while reinstalling the seal, until reaching the bottom of the dashboard where the cord should emerge. 7. Pass the power cord behind the glove box. Depending on the vehicle model, secure the cord behind the glove box, or conceal it behind the firewall or under the floor mat. 8. Loosen the screws of the lower center console trim panel, create a small gap, insert the cord into the gap, and then tighten the screws. 9. Plug the power adapter into the cigarette lighter socket and verify that the dash cam powers on and functions normally.