How to Install a Tire Pressure Monitoring System on the New Santana?

1 Answers
SanSophia
07/30/25 5:39am
The installation of a tire pressure monitoring system on the new Santana is relatively simple. Auto modification shops or tire shops can provide this service, and you just need to have it installed. The tire pressure monitoring system allows drivers to better assess tire conditions, enhancing driving safety to some extent. The exterior design of the new Santana no longer resembles the classic Santana or Zhijun models. Its family-style front grille is similar to that of the New Lavida and other models. Compared to the previous generation, it better aligns with the aesthetic preferences of the modern era. The overall lines of the new car are smooth and neat, with a simple yet enduring design style.
Was this review help?
5
2
Share
More Forum Discussions

What are the speeds for 1st, 2nd, 3rd, 4th, and 5th gears?

Manual transmission gears 1, 2, 3, 4, and 5 correspond to the following speeds: 1. 1st gear: Used for normal starting or climbing very steep slopes. The speed is generally around 10 kilometers per hour when using this gear. 2. 2nd gear: Used as a transition gear for acceleration after starting, or for low-speed driving or climbing steep slopes. The speed is generally around 20 kilometers per hour. 3. 3rd gear: Used at speeds between 20-40 km/h, commonly used for city driving. 4. 4th gear: Used at speeds between 40-60 km/h. 5. 5th gear: Can be used at speeds of 60 km/h or above.
11
5
Share

How to Get a Car Purchase Deposit Refunded?

Here are the specific methods to get a car purchase deposit refunded: 1. Negotiation: In general, as long as the deposit amount involved is not substantial, the salesperson will agree to refund the deposit to avoid trouble if the customer requests it. 2. Legal Proceedings: If the other party is truly unwilling to compromise and refuses to refund the deposit, the car owner can directly inform them of their intention to pursue legal proceedings. In such cases, most 4S shops will find it troublesome and refund the deposit to the owner. 3. Sending a Lawyer's Letter: The car owner can ask a lawyer friend to send a lawyer's letter, making the 4S shop aware that they are now involved in an economic dispute. Generally, 4S shops will not escalate the matter and will refund the deposit to the owner.
13
5
Share

How to Handle Scrapped Vehicles?

When a vehicle reaches the end of its service life, the owner should promptly complete the vehicle scrapping procedures at the traffic management department of the public security authority. Bring the vehicle registration certificate, license plate, driving license, and the original vehicle to the motor vehicle recycling enterprise designated by the public security traffic management department, and fill out the "Application Form for Motor Vehicle Suspension, Resumption/Cancellation of Registration." The recycling enterprise will confirm the dismantling of the vehicle and issue a "Scrapped Vehicle Recycling Certificate" to the owner. Motor Vehicle Scrapping Process: The vehicle owner applying for scrapping and renewal should fill out one copy of the "Application Form for Motor Vehicle Modification, Transfer, Alteration, Suspension, or Scrapping Approval," stamped with the owner's seal. Apply at the registration acceptance counter, and for vehicles that have reached the scrapping age, a "Vehicle Scrapping Notice" will be issued. For vehicles that have not reached the scrapping age but are deemed to meet the scrapping standards after inspection by the motor vehicle inspection counter, a "Vehicle Scrapping Notice" will be issued. The owner can then choose a qualified recycling enterprise to dismantle the vehicle. The recycling enterprise will dismantle the vehicle and take photos after verifying the "Notice." The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The owner should then submit the "Modification Form," "XX Province Vehicle Renewal Technical Appraisal Form," "Scrapped Vehicle Recycling Certificate," and photos of the dismantled vehicle to the motor vehicle inspection counter for verification and signature. The license and certificate will be reclaimed, and the scrapping registration will be processed after approval according to regulations.
7
5
Share

What causes the service light to indicate an engine fault?

The following are specific reasons and solutions for the engine fault light being on: 1. Carbon buildup in the car causing ignition difficulties: Accompanied by slight shaking at idle, simply clean the throttle body and fuel injectors. 2. Weak spark plug ignition energy: Spark plugs not replaced after the maintenance cycle, leading to severely reduced ignition energy and misfires. 3. Insufficient fuel system low pressure: Low fuel pressure directly causes the engine to ignite twice, specifically check the fuel pressure regulator, fuel pump, fuel filter, and internal lines. 4. Battery depletion: Jump-start the car or use another battery. 5. Incorrect engine timing: Engine timing not matching the engine, replacing the alternator belt on certain engine models may cause the timing to skip, resulting in ignition difficulties.
3
3
Share

Will Applying a Paint Protection Film Damage the Car Paint?

High-quality paint protection films can better protect the car's original paint, while inferior ones may damage the car paint and, in severe cases, even affect driving safety. Here are the relevant explanations: 1. Introduction to Paint Protection Films: A paint protection film is a thermoplastic polyurethane film (TPU) containing UV-resistant polymers and anti-yellowing properties, with exceptional toughness. Once applied, it isolates the car paint from the air, protecting against acid rain, oxidation, and scratches, thereby providing long-lasting paint protection. 2. Inferior Paint Protection Films: To cut costs and simplify production processes, inferior films may use materials containing volatile pollutants such as formaldehyde, which can evaporate more quickly when exposed to sunlight. Prolonged exposure to a car interior filled with these volatile pollutants can also affect passengers' health.
6
2
Share

What to do when the Q5 tire pressure warning light comes on?

q5 tire pressure warning solution is: First, calibrate the tire pressure of all four tires, then enter the vehicle settings from the central display menu, go to the system maintenance options, find the tire pressure monitoring option, and store the tire pressure. When the tire pressure warning yellow light comes on, it indicates abnormal tire pressure, but the car can still be driven. However, it is not suitable for long-distance driving in high temperatures. The Q5 is a model under FAW Audi, with body dimensions of 4629mm in length, 1898mm in width, and 1655mm in height, and a wheelbase of 2807mm. In terms of appearance, the Q5 features a distinctive large-mouth front grille, an overall stylish and attractive design, with smooth and flowing body lines.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.