How to Install a Metal License Plate?
2 Answers
Method for installing a metal license plate: 1. Prepare the vehicle license plate and tools; 2. First install the rivet nut onto the riveting tool, turn the rivet nut clockwise onto the riveting tool until the head of the riveting tool is exposed; 3. Use the riveting tool to rivet the rivet nut onto the car's bumper, align it with the two holes on the bumper, insert it, hold the two handles of the riveting tool with your hands, press firmly towards the middle, then remove the riveting tool; 4. Take out the license plate fastener, first place the fastener core into the outer fastener, then pass the screw through the middle of the core to secure the license plate fastener; 5. Use a cross screwdriver to fix the license plate fastener onto the four holes on the license plate, securing the license plate to the bumper together.
I remember when I bought my first car, I installed the license plate myself—simple yet requiring patience. First, gather tools like a Phillips screwdriver or hex key, readily available at supermarkets. Before installation, check the vehicle’s mounting spot, such as the center of the front bumper, ensuring the surface is clean—dust affects adhesion; wipe it down if dirty. Then, align the plate’s holes and slowly tighten the screws—avoid overtightening to prevent stripping or leaving them too loose, risking detachment. It took me about ten minutes, a satisfying DIY moment. Finally, give it a gentle shake to confirm stability and double-check the legibility of the numbers before driving off. Regular maintenance, like checking screws, saves hassle and money—even beginners can master it quickly.
