How to Install a Dash Cam on the Rearview Mirror?

1 Answers
MacPatrick
07/30/25 7:25am
The method to install a dash cam on the rearview mirror is as follows: 1. Remove the original rearview mirror by unscrewing the screws with a screwdriver and gently pulling it upwards to detach; 2. After removal, install the rearview mirror dash cam, which usually comes with a vehicle-specific bracket for direct fixation; 3. Once securely installed, conceal the power cable of the rearview mirror; 4. After installation, power it on for testing. A dash cam is an instrument that records images, sounds, and other related information during vehicle travel. Installing a dash cam allows for the recording of the entire driving process, including video and audio.
Was this review help?
14
2
Share
More Forum Discussions

What are the penalties for overloading a sedan?

If a sedan is overloaded by more than 20% of its rated passenger capacity, 12 demerit points will be deducted at once; if the overload is less than 20% of the rated capacity, or if other passenger vehicles carry more than 20% over the rated capacity, 6 demerit points will be deducted; for passenger vehicles other than commercial buses and school buses, if the overload is less than 20% of the rated capacity, 3 demerit points will be deducted. According to relevant regulations, children are also counted as one passenger, so an adult holding a child in one seat is also considered overloaded driving and will be subject to the same penalty points for sedan overloading. When driving, passengers should be carried strictly in accordance with regulations, and once overloaded, penalty points for sedan overloading will be imposed.
13
2
Share

What are the demerit point regulations during the probationary period for a new driver's license?

New driver's license probationary period demerit point regulations are: 1. 1 to 11 points deducted: First pay the fine, and the license will automatically restore to 12 points after the next scoring cycle. There are no special demerit regulations during the probationary period; deductions are made according to the regulations for the application and use of motor vehicle driver's licenses for driver violations. 2. If 12 points are deducted, the driving qualification for the probationary period's permitted vehicle types will be revoked. The driver must re-enroll in a driving school, pass all four subject exams, and obtain a new license. Extending the probationary period only applies to drivers holding licenses for large buses, tractors, city buses, medium-sized buses, or large trucks. If such drivers accumulate 6 or more points but fewer than 12 points during the one-year probationary period, their probationary period will be extended by one year.
4
4
Share

Is the driver's license photo one-inch or small one-inch?

Driver's license photo specifications require a one-inch size. The photo must be a bareheaded front-facing shot taken within six months prior to the license application, with a white background; neither men nor women are allowed to wear earrings, but those who need vision correction must wear glasses; women's hair must not be loose, and men's hair must not be too long; red clothes and uniforms are not allowed; the expression should be natural, showing all facial features, and a slight smile is acceptable; the head should occupy about two-thirds of the photo. A driver's license, also known as a driving permit, is a document issued by the government's transportation department to individuals who are qualified to drive, usually in the form of a card. To obtain a driver's license, one must meet the minimum age requirement and pass a driving test. The driver's license typically specifies the types of motor vehicles the holder is permitted to drive, such as motorcycles, cars, trucks, buses, etc.
20
4
Share

Is driving at 100 km/h on an 80 km/h speed-limited highway considered speeding?

Driving at 100 km/h on an 80 km/h speed-limited highway constitutes a 25% overspeed violation, which will result in a 6-point deduction and a fine. Penalties for speeding on highways: When exceeding the speed limit by less than 10%, a warning is issued without a fine. Speeding between 10% and 20% results in 3 penalty points and corresponding fines. Speeding between 30% and 50% leads to 6 penalty points and corresponding fines. Exceeding the speed limit by more than 50% will result in 12 penalty points or direct revocation of the driver's license as per regulations. Article 78 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" stipulates: Highways shall indicate lane speed limits. The maximum speed shall not exceed 120 km/h, and the minimum speed shall not be lower than 60 km/h. The maximum speed for small passenger vehicles on highways shall not exceed 120 km/h, other motor vehicles shall not exceed 100 km/h, and motorcycles shall not exceed 80 km/h. For roads with 2 lanes in the same direction, the minimum speed for the left lane is 100 km/h. For roads with 3 or more lanes in the same direction, the minimum speed for the leftmost lane is 110 km/h, and the minimum speed for the middle lane is 90 km/h. If the speed limit indicated by road signs conflicts with these lane speed regulations, drivers shall follow the speed limit indicated by road signs.
20
1
Share

What causes the Focus transmission overheating warning?

The frequent gear shifting of the Focus transmission can easily lead to overheating. When encountering congested road sections, switch to S mode or manual mode to reduce gear shifting. Below is relevant information about the Focus: 1. Engine: Equipped with 1.0T and 1.5T engines. It is paired with an 8-speed automatic transmission and offers three driving modes. 2. Exterior: The new Focus adopts a brand-new family design, with extensive use of black components on the grille and other areas, a sporty bumper, and a rear spoiler. The new car comes with dual-tone 18-inch wheels. The LED headlights feature a sharp design, with the L-shaped daytime running lights being particularly eye-catching. The rear of the car is fuller compared to the current model, and the LED taillights provide a very striking display effect.
13
4
Share

Why is there no sound after successful Bluetooth connection?

Reasons for no sound after successful Bluetooth connection: 1. The wireless network distance is too far, resulting in poor signal reception; 2. Insufficient battery power or poor battery quality causing low voltage; 3. Incompatibility between the phone system and car Bluetooth system; 4. Bluetooth headset malfunction. Solutions: 1. Disconnect the WIFI signal on the phone and try reconnecting; 2. Disconnect the device, reduce the distance and re-match the signal; 3. Charge the Bluetooth device or replace the battery; 4. Connect the phone to another Bluetooth device. If the problem doesn't occur, it's an issue with the car Bluetooth system which needs repair. Bluetooth technology is a global standard for wireless data and voice communication, based on low-cost short-range wireless connections, creating a special short-range wireless technology connection for establishing communication environments between fixed and mobile devices.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.