How to Install a Dash Cam in Song Pro?

1 Answers
NorahAnn
07/30/25 5:05am
Installation of dash cam in Song Pro: 1. First, determine the installation position of the dash cam; 2. Determine the optimal wiring route based on the length of the power cord; 3. Tuck the power cord of the dash cam into the gap of the car roof lining; 4. Then tuck the wire into the door frame sealing strip and reinstall the sealing strip; 5. Insert the power cord into the sealing strip until it reaches the bottom of the dashboard and pull the wire out; 6. Finally, plug it into the cigarette lighter power socket. The functions of a dash cam are as follows: 1. Protect the legitimate rights and interests of drivers. In case of scratches or collisions with pedestrians crossing the road or cyclists and motorcyclists, there might be extortion attempts. With a dash cam, drivers can provide valid evidence for themselves. 2. Playback of the recorded footage makes accident responsibilities clear at a glance, allowing traffic police to handle accidents quickly and accurately. This enables quick clearance of the scene to restore traffic while preserving valid evidence of the incident, creating a safe and smooth traffic environment. 3. If every vehicle is equipped with a dash cam, drivers will be less likely to violate traffic rules, significantly reducing the accident rate. Vehicles involved in accidents will be recorded by other vehicles' dash cams, greatly decreasing hit-and-run cases. 4. When courts adjudicate road traffic accident cases, sentencing and compensation will be more accurate and evidence-based, also providing evidence for insurance company claims.
Was this review help?
7
2
Share
More Forum Discussions

How to Replace the Cabin Air Filter in a Volvo S60L?

Volvo S60L cabin air filter replacement steps are as follows: 1. Locate a gap on the far left side of the front passenger footwell, lift the carpet to reveal the fuse box. 2. There's a wiring harness secured with clips on the fuse box - disconnect this wire first. 3. The fuse box itself is also clip-mounted; release the clips to remove the entire fuse box. 4. The cabin air filter housing will now be visible - remove it for replacement. Note: The cabin air filter requires regular replacement. Prolonged use without replacement allows bacterial growth and odor development, which may harm occupants' health. The AC system also needs periodic disinfection and cleaning to prevent bacterial proliferation and unpleasant odors.
19
5
Share

How many kilometers should the gasoline filter be replaced?

Automobile fuel filters generally need to be replaced every 10,000 kilometers. Here is relevant information about gasoline filters: 1. The main function of a gasoline filter is to remove impurities from gasoline. 2. The gasoline filter is abbreviated as fuel filter. There are carburetor-type and fuel injection-type gasoline filters. For gasoline engines using carburetors, the gasoline filter is located on the inlet side of the fuel pump, with lower working pressure, and usually has a nylon housing. For fuel injection engines, the gasoline filter is located on the outlet side of the fuel pump, with higher working pressure, and typically has a metal housing. 3. The filter element of a gasoline filter is mostly made of filter paper, but some use nylon cloth or polymer materials. The main function is to remove impurities from gasoline.
13
0
Share

What type of battery does the Hongqi E-H3 use?

This vehicle utilizes a ternary lithium-ion battery. Below is an introduction to ternary lithium-ion batteries: 1. Currently, most pure electric vehicles and hybrid electric vehicles use ternary lithium-ion batteries, which represent the future trend. Ternary lithium-ion batteries are lighter in weight and have higher energy density, making them highly suitable for family cars. 2. The cathode of a ternary lithium-ion battery is typically made from ternary materials; some ternary lithium-ion batteries use nickel, cobalt, and aluminum for the cathode. 3. The working principle of ternary lithium-ion batteries is the same as that of ordinary lithium-ion batteries. The working principle of lithium-ion batteries is very simple: lithium ions move back and forth between the cathode and anode, allowing the battery to complete charging.
15
3
Share

Where is the license plate with 'Ba K' from?

Currently, there is no vehicle license plate with 'Ba K' in China. There are two possible reasons for the appearance of a 'Ba K' license plate: 1. It may be a license plate used during film or TV show production, which is allowed only after being registered with the public security and traffic management departments. 2. It could be a fake license plate. If you encounter such a plate, you can directly report it to the police. The use of fake license plates is subject to the following penalties: According to Article 96 of the Road Traffic Safety Law of the People's Republic of China, if a motor vehicle uses a forged or altered license plate on the road, the vehicle will be impounded, and the driver will be fined between 2,000 and 5,000 yuan and detained for up to 15 days. When driving on the road, motor vehicles are required to carry the vehicle registration certificate, driver's license, display the license plate, and have the annual inspection and compulsory insurance labels affixed.
12
5
Share

How to Deal with Frost on the Windshield?

Here are the methods to handle frost on the windshield: 1. Open the window: Frost forms due to the temperature difference between the cold outside and warm inside. In most cases, especially when the car is full of passengers, the temperature inside is higher, causing frost to form quickly. Opening the window for ventilation allows air to circulate between the inside and outside, reducing frost on the windshield. 2. Turn on the heater: When the vehicle's coolant temperature rises sufficiently, you can turn on the heater and direct the warm air toward the windshield while activating the external air circulation. This helps minimize the temperature difference between the inside and outside of the windshield, effectively removing frost. 3. Wipe with a towel: In winter, after the car has been parked outside overnight, the windshield is often covered with frost. The most effective solution in this case is to wipe and clear the frost with a clean towel. 4. Apply professional anti-fog spray: Professional anti-fog sprays can be directly applied to the windshield, forming a transparent protective film that effectively prevents moisture from condensing on the glass. Typically, one application of such a spray can last for about a week.
19
1
Share

What Causes Occasional Idle Shaking?

Severe engine carbon buildup, ignition system issues, unstable oil pressure, aging engine components, etc. Below are three main causes of idle shaking: 1. Severe engine carbon buildup - This leads to poor engine performance, increased fuel consumption, and even starting difficulties, potentially causing significant long-term damage to the vehicle. 2. Ignition system problems - These cause unstable engine operation, resulting in deteriorated acceleration performance, reduced power output, and poorer fuel economy. 3. Unstable oil pressure - Multiple factors can cause this, including insufficient engine oil, dirty oil, thinned oil, oil pipe leaks, oil pump failure, or excessive wear of pump components.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.