How to Install a Car Cover?

Where is the tire pressure reset button for the WEY VV5?

The tire pressure reset button for the VV5 is located on the dashboard, identifiable as a black column. Below is some relevant information about the VV5: 1. Powertrain: The WEY VV5 is classified as a compact SUV. Typically, SUVs in this category are equipped with a 1.5-liter or 1.5T engine. However, WEY has outfitted the VV5 with the same 2.0T engine as the VV7, which represents the pinnacle of Great Wall's engine manufacturing capabilities. This engine has been slightly adjusted, delivering a maximum power of 197 horsepower, paired with a 7-speed dual-clutch transmission. Due to the smaller body size, this 2.0T engine still delivers outstanding performance in the VV5. 2. Exterior Design: The lighting design of the VV5 is truly the highlight of the vehicle. The vertical daytime running lights, front fog lights, high-mounted brake light, rear position lights, rear fog lights, and rear reflectors all echo the WEY logo. Particularly noteworthy is the vertical high-mounted brake light, a bold design that set a new precedent in the industry. Moreover, the avant-garde headlight design is not just for show; the VV5 comes standard across all trims with LED projector-type bi-function headlights, featuring electric height adjustment.

9

4

Share

What is the sequence for starting the car, engaging the clutch, and releasing the handbrake?

In the second subject of the driving test, the sequence for starting the car, engaging the clutch, and releasing the handbrake is as follows: press the brake and clutch pedals, release the handbrake, slowly lift the left foot until you feel the car vibrating, then gradually lift the right foot until the car starts moving, and finally remove both feet completely. Below is some relevant information about the second subject: 1. Restarting after stalling in Subject 2: Press both the brake and clutch pedals to prevent the car from rolling backward, shift the gear to neutral, turn the key to restart the engine, and then proceed with the original starting steps. 2. Retake rules: If you fail the Subject 2 test on the first attempt, you are allowed one retake. If you do not take the retake or fail it again, the test ends, and you must reschedule the test after ten days. Within the validity period of the driving skill test permit, the number of test reschedules for Subject 2 and Subject 3 (road driving skills) must not exceed five. If you fail the fifth test, all previously passed subjects will be invalidated.

9

2

Share

Does the Wuling New Truck require an annual inspection?

Wuling New Truck requires an annual inspection. The following is the relevant introduction about the annual inspection: 1. Types of annual inspection: For non-operating small passenger vehicles with 9 seats or less, go directly to the inspection station for inspection. After passing the inspection, the inspection station will print the inspection certificate on the duplicate of the driving license and return it to the owner; For passenger vehicles and trucks with more than 9 seats, the owner should first go to the pre-inspection point of the local traffic brigade for appearance inspection, including whether the passenger seats meet the requirements, whether the truck has reflective signs and rear and side protective devices installed as required, etc. After passing the pre-inspection, take the certificate to the inspection station for inspection; Motorcycles, tricycles and other vehicles belong to the manual inspection category. The owner should go to the pre-inspection point of the local traffic brigade for manual inspection, and after passing the inspection, go to the vehicle management window of the brigade to print the inspection certificate. 2. Preparation for annual inspection: Check whether the insurance policy is correct, especially for the first annual inspection of a new car. If the information on the insurance policy does not match the actual situation, go to the insurance company to correct it; If the environmental protection label needs to be replaced, go to the auto repair shop of the Environmental Protection Bureau in advance to test the exhaust emissions to save time.

5

1

Share

What is the torque specification for EA888 engine bolts?

EA888 engine bolt torque is 40nm. Below is a detailed introduction to the Volkswagen EA888 engine: 1. Overview: The EA888 engine is a Volkswagen-designed engine that integrates advanced technologies such as direct fuel injection, turbocharging, and variable valve timing to achieve a balance between performance, fuel efficiency, and environmental friendliness. It is installed in various Volkswagen models including the Magotan, CC, Tiguan, Passat, and Audi Q5. 2. Engine displacement: The EA888 series includes two displacements: 1.8L and 2.0L. The 1.8TSI delivers a maximum power of 118kw (160PS) at 5000-6200rpm and a maximum torque of 250Nm at 1500-4500rpm. The 2.0TSI offers a maximum power of 147kw (200PS) at 5100-6000rpm and a maximum torque of 280Nm at 1700-5000rpm. The mechanical structures of these two displacements are fundamentally similar, with the main differences being the length of the connecting rods between the crankshaft and pistons. The 2.0TSI has shorter connecting rods and a larger crankshaft radius compared to the 1.8TSI, which increases the displacement. Additionally, the piston top structures differ slightly, primarily to adjust the combustion chamber volume, ensuring consistent compression ratios and combustion effects.

4

0

Share

What is the approximate fuel consumption of the Han DM?

The BYD Han DM has a fuel consumption of 5.9 liters per 100 kilometers. Here are specific methods to reduce fuel consumption: 1. Lightly press the accelerator: The car consumes the most fuel during low-speed starts, so gently pressing the accelerator during startup prevents excessively high RPMs and effectively reduces fuel consumption. 2. Avoid high RPMs: Try to avoid unnecessary high RPMs, as fluctuating engine speeds can significantly increase fuel consumption. 3. Regular maintenance: Change the engine oil and remove carbon deposits. 4. Avoid sudden braking: Anticipating road conditions in advance not only improves driving safety but also saves fuel, such as gradually slowing down before traffic lights and using inertia to glide.

19

3

Share

How thick are Michelin tires?

Michelin passenger car tires have a maximum tread thickness of approximately 13mm (7mm tread depth + 6mm tread thickness). Here's an introduction to relevant information about car tires: Shock absorption: Automotive tires are one of the most important components of a vehicle, directly contacting the road surface and working together with the suspension system to absorb shocks during driving. Comfort: They ensure good ride comfort and smooth driving performance, maintain excellent adhesion between wheels and road surface, improve traction, braking, and off-road capability, while bearing the vehicle's weight.

11

1

Share

How to Install a Car Cover?

Where is the tire pressure reset button for the WEY VV5?

What is the sequence for starting the car, engaging the clutch, and releasing the handbrake?

Does the Wuling New Truck require an annual inspection?

What is the torque specification for EA888 engine bolts?

What is the approximate fuel consumption of the Han DM?

How thick are Michelin tires?

What is the trial lifting height?

Why does the tachometer work intermittently?

Why does the car lose power immediately after ignition?

Where is the fuse located in the Skoda Rapid?