How to Install a Beam Wiper Blade?
4 Answers
Press the lower part of the wiper clip, flip the clip open, hook it onto the wiper mounting base, and then close the wiper clip. If there are any foreign substances such as oil, wax, or dirt on the windshield, clean them thoroughly before use. A beam wiper blade is composed of four parts: the wiper rubber, the beam wiper steel strip, the wiper cover, and plastic components. Compared to traditional wiper installation, assembling a beam wiper is very simple and convenient; it only requires manual assembly by workers without the need for tools like screwdrivers. Below are the maintenance methods for wiper blades: 1. When using the wiper to remove dust from the windshield on sunny days, always spray windshield washer fluid and avoid dry wiping. 2. If there are other stubborn or hard contaminants on the glass, clean them manually. These substances can easily damage the wiper blade, causing it to wipe poorly. In severe cases, the wiper motor may also be affected. 3. When lifting the wiper blade during car washing or daily cleaning, hold the "backbone" of the wiper blade and gently return it to its position. Do not let the wiper blade snap back abruptly. 4. In winter, use an ice scraper to remove ice chips from the windshield surface first to avoid putting extra strain on the wiper.
Installing frameless wiper blades is quite simple. First, park the car and turn off the engine to ensure safety. Locate the wiper arm, where there's a small release button—pressing it allows the old wiper blade to slide out easily. Remember not to pull too hard to avoid damaging the wiper arm. Before taking out the new wiper blade, check its size to ensure compatibility; most universal types nowadays fit various car models. Align the release tab and gently push the new blade in until you hear a 'click,' indicating it's securely installed. After installation, test it: start the engine, turn on the wipers, and let them sweep a few times to check if the windshield is cleaned thoroughly without streaks. DIY replacement has many benefits—it saves money and time, and frameless wiper blades distribute pressure evenly on the windshield, resulting in quieter operation. After replacement, check the curvature of the wiper arm; if it's too straight, the blade may wear out faster. I often handle these small tasks myself, keeping my car maintenance smooth and efficient.
Before installing frameless wipers, I usually prepare the essentials: new wipers, cloth gloves for grip, and a clean towel to wipe the windshield. The wiper arm on the car has a hook—just press the small button, and the old wiper slides off. Don’t forget to clean the hook; wipe off any grease before installing the new one. Align the new wiper’s clip properly, then press it in slowly and secure it. After installation, test the wipers by spraying water and running them a few times to ensure no skipping or noise. It’s an easy DIY job—get it right the first time. The benefit is that the frameless design is lightweight and long-lasting, more hassle-free than traditional frame wipers. Remember to replace them regularly, as summer heat accelerates aging—don’t wait until they fail in the rain. The whole process takes about ten minutes, and even beginners can master it.
After parking, ensure the car is not started. The old wiper has a clip; press a small button to remove it. Align the new wiper with the hook, insert it into the slot, and press firmly. Test by turning on the wiper function to check for smooth operation. Choose a beam wiper for better fit and less noise. Installing it yourself saves money.
