···
Log in / Register

How to inspect a newly purchased car?

4 Answers
WyattLee
07/30/25 1:07am
Methods for inspecting a newly purchased car: 1. Check the production date of the car, which is usually located on the door edge. If not found, consult the car salesperson directly; 2. Inspect the car's exterior. Choose a sunny day if possible, as sunlight allows for a thorough and clear examination of the car's paint. Also, check for any dents on the car body; 3. Open and then close all four car doors to ensure they close smoothly; 4. Examine the car's interior, focusing on any stains or damages; 5. Test all functions, including the steering wheel and other features, ensuring each is operated at least twice.
Was this review help?
10
1
Share
MaryLynn
08/15/25 6:39am
When inspecting a new car, I usually start by checking all the documents from beginning to end to ensure the purchase contract, insurance policy, and warranty card are complete, and that the VIN matches the actual vehicle. Then, I conduct a thorough exterior inspection, walking around the car to check for any scratches or paint chips, paying special attention to the alignment of door seams and side mirrors. I start the engine to listen for smooth operation, test all lighting combinations including brake lights and turn signals to ensure they work properly. The interior shouldn’t be overlooked either—I press every button to test the air conditioning’s hot/cold airflow, the clarity of the audio system, and the smooth operation of the power windows. If possible, I recommend taking a short test drive to feel the steering wheel responsiveness and brake sensitivity, with tire pressure ideally around 32-35 PSI. Don’t rush the process; bring a family member along for extra eyes, and immediately document any issues for the dealer to address.
Was this review help?
1
1
Share
Expand All
PrestonLynn
10/20/25 5:16am
I'm super excited about my new car and first choose a sunny spot to carefully admire the design. I'll get up close to check the reflections on the car's surface for any minor dents or uneven paint. The rims and tire treads should be clean and undamaged, and I'll run my hands along the seams to ensure there are no protruding edges. Inside the car, my favorite part is tinkering with the infotainment screen, testing each function to see how responsive it is, and checking if the seat material is comfortably firm or soft. When I turn on the AC, I want the airflow changes to be smooth, and I'll connect my phone via Bluetooth to play music and check for synchronization without any static. Don’t forget to open the trunk to see if the space meets your expectations and take a sniff to ensure the new-car plastic smell isn’t too strong. It’s also a good idea to bring a flashlight to inspect the bolts under the chassis, making sure everything is tight and secure. The whole process feels like a treasure hunt—if you find any minor flaws, consider swapping the car to ensure your beloved ride is perfect from the start.
Was this review help?
3
0
Share
Expand All
EmersynMarie
12/03/25 5:49am
As a parent buying a new car, I prioritize comfort and safety. Take the kids along to test the back seats, ensuring the seat belts buckle easily and child locks are user-friendly. First, sit in the driver's seat to adjust the position and check if it moves smoothly. After starting the engine, listen for excessive noise that might disturb the little ones. For the interior, sniff for odors—if the new car plastic smell is strong, open the windows and doors to air it out. Test how quickly the AC switches between heating and cooling, and make sure the vents aren't blowing directly at the child's head. Check if the lighting setup, including rear seat lights, is bright enough for nighttime care. Briefly review the documents, focusing on the contract and insurance numbers. Keep the overall inspection short, wrapping up within 10 minutes, and contact the salesperson directly if any issues arise for a hassle-free experience.
Was this review help?
20
0
Share
Expand All
More Forum Discussions

What are the causes of tire fires?

Tire fires are mainly caused by three reasons: excessive speed, overloading, and overheating of tires leading to ignition; bearing fires igniting tires; or brake lock-up causing excessive friction that results in spontaneous combustion. Situations requiring tire replacement: Check the tire wear indicators: Regardless of the tire brand, wear indicator marks are set in the groove areas of the tread. When the tread depth has worn down to the level of the raised indicator rubber, it indicates that the tire needs to be replaced. Bulging phenomenon: If the tread bulges, it means the local rubber has deteriorated or there is uneven pressure. In this case, the tire may explode at any time, making continued driving extremely dangerous, so it should be replaced promptly.
20
5
Share

What is the fuel consumption of CB400?

CB400 has a fuel consumption of 4.5 liters per 100 kilometers. Motorcycle fuel consumption calculation: First, record the odometer reading (L1) when the fuel level is high and the fuel supply is cut off. Then, note the amount of fuel added (YL) during refueling. When the fuel level drops to the high level cutoff again, record the odometer reading (L2). Subtract L1 from L2 and divide by YL to get the distance traveled per liter of fuel in actual driving conditions. Factors affecting motorcycle fuel consumption: Low-quality engine oil consumes more than high-quality oil, and lower viscosity oil consumes more than higher viscosity oil. Engine temperature plays a significant role - low-speed high-load conditions and long-distance travel can cause excessive engine temperature, dramatically increasing oil consumption. Oil consumption also varies based on the engine's internal structure and lubrication method. Engines with more oil passages, higher pressure, and multi-point injection tend to have higher oil consumption.
7
4
Share

What is the typical fuel consumption of a 150cc motorcycle?

On average, a 150cc motorcycle consumes about 3 liters of fuel per 100 kilometers. Below is a partial introduction regarding fuel consumption: Introduction: Generally refers to the gasoline consumption per 100 kilometers, which is a theoretical indicator for vehicles. Methods to reduce fuel consumption: The longer the idling time when parked, the greater the fuel consumption, so try to minimize idling time; avoid rapid acceleration, slamming the throttle, and driving at low RPMs. Factors affecting fuel consumption: Various working conditions such as acceleration, deceleration, braking, and engine idling, as well as load capacity, temperature, and whether the air conditioning is on, all have an impact.
15
1
Share

What does the Cruze P0016 fault code mean?

The Cruze P0016 fault code indicates a malfunction in the crankshaft or camshaft position sensor, which is related to a problem in the post-catalyst fuel system. First, check if the timing belt is broken or has skipped teeth. Then, inspect whether the solenoid valve that adjusts the valve timing is damaged. It is also necessary to check if the oil pressure is normal, and then realign the timing. The crankshaft converts the up-and-down motion of the pistons into rotational motion. The camshaft controls the opening and closing of the valves. The electronic control unit continuously monitors the variable camshaft's timing position and checks the relative position between the camshaft and the crankshaft. If the relative position is misaligned by more than one tooth, the P0016 fault code will appear. Possible causes include a malfunction in the camshaft position sensor or its circuit, a malfunction in the crankshaft position sensor or its circuit, a faulty engine speed sensor, contaminated oil, a stuck variable camshaft solenoid valve, etc. After troubleshooting the vehicle, the fault code must be cleared. When clearing the fault code, it is essential to strictly follow the specific vehicle model's designated fault code clearing procedure. Under no circumstances should the method of disconnecting the battery's negative terminal be used to clear the fault code.
5
0
Share

Is the CVT transmission of the CRV durable?

The CVT transmission of the CRV is durable. CVT transmission offers good comfort: Since there are no manual or automatic transmission gears, but instead two steel belts that drive the system by changing the transmission radius on the conical wheels to alter the gear ratio, there is no traditional gear-shifting process. This naturally eliminates the jerking sensation during gear shifts, achieving linear power output and smoother driving. CVT transmission has excellent performance: Due to the linearization of power output, the engine's working state is more easily matched with the vehicle's load and speed, achieving a balance between fuel consumption, exhaust emissions, and the performance of the engine and transmission. CVT transmission's fuel-saving performance: It can maintain the optimal gear ratio at all times, improving mechanical transmission efficiency and fuel economy. The steel belt transmission components have a simple structure and are highly controllable, with current technology achieving high reliability and service life.
10
1
Share

What to Do When MG GS ABS and Dynamic Stability System Malfunction?

Solutions for MG GS ABS and dynamic stability system malfunctions are introduced as follows: 1. If under warranty, the car can still be driven, but the ABS is ineffective, so drive slowly. 2. If out of warranty, it's best to remove all four tires and clean the ABS thoroughly, as oil contamination may be the cause. Additional information on ABS system response during emergency braking: 1. During emergency braking, the ABS system allows the wheels to maintain a state of rolling and sliding. 2. When the ABS system is active, the ABS indicator on the dashboard will flash. 3. If the ABS system malfunctions, the ABS indicator on the dashboard will remain lit. 4. If the ABS system malfunctions, do not continue driving; resume driving only after repairs. 5. Continuing to drive with a malfunctioning ABS system poses significant safety hazards.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.