How to Inspect a New Car When Taking Delivery?

1 Answers
Mabel
07/29/25 5:22pm
When inspecting a new car upon delivery, check the production date, exterior, interior, mileage, and chassis. The closer the production date, the newer the car, which is preferable. Generally, domestically produced cars older than 6 months are considered inventory cars, while those within 6 months are usually acceptable. Of course, the newer, the better. When examining the car's exterior, pay attention to any scratches, dents, or other defects on the paint surface. It's essential to park the car in good lighting and inspect carefully. It's recommended to view the paint surface from an angle for better clarity. For the interior: Check for obvious stains, scratches on leather surfaces, and test all operable and audible functions to ensure they work properly. Also, start the car to check if the battery is functioning correctly.
Was this review help?
7
0
Share
More Forum Discussions

What is the remote control range of a car key in meters?

The remote control range of a car key is approximately 30 to 50 meters. Functions of a car key: Remotely lock and unlock car doors; Long press the lock button on the remote key after turning off the engine to close the windows; Press the red horn-shaped button on the car key to locate the vehicle or send a distress signal; Long press the trunk unlock button to automatically open the trunk; Press the unlock button on the remote key once to open only the driver's door, press twice to unlock all doors. Key maintenance methods: Avoid frequently placing it together with metal objects; Do not store the spare key in the car door; Prevent the smart key from falling or being impacted; Keep the smart key away from high-temperature environments or contact with liquids; Do not place the key near electronic devices.
7
0
Share

Can a hole in the bumper be repaired?

Can a hole in the bumper be repaired? Extensive damage to the bumper: During daily driving, minor collisions are almost unavoidable. As the primary buffer components in collisions, the front and rear bumpers are often the most vulnerable. Sometimes, even a small stone on the highway can cause a hole in the bumper. Modern car bumpers are primarily made of plastic, typically polypropylene-based. If the damage to the bumper is extensive, it is not advisable for the owner to attempt repairs themselves, as severe damage may not be worth fixing. In cases of large-scale damage, it is more appropriate to notify the insurance company for a claim. Small puncture holes: If fragments are available, they can simply be welded back using a welding torch. If no fragments are present, a piece can be taken from a scrap bumper. The fragment should then be welded onto the damaged area. Finally, use a touch-up paint pen to restore the paint.
4
0
Share

What Causes the Water Temperature Alarm to Trigger Immediately Upon Ignition?

Vehicle water temperature alarm triggering immediately upon ignition may be caused by insufficient coolant or a faulty liquid level sensor. Solutions for water temperature gauge alarm: When this issue occurs, the first thing to check is whether the coolant is insufficient. If the coolant level is low, promptly add coolant and restart the vehicle to see if the warning light remains on. If the coolant level is adequate but the water temperature alarm persists, then the liquid level sensor is likely malfunctioning. For this fault, it is recommended to visit a 4S shop for professional inspection by a technician. The fault source can be identified through the vehicle's self-diagnosis system. Precautions when handling water temperature gauge alarms: Do not rush to turn off the engine, as excessively high water temperature can cause the piston, cylinder walls, cylinder block, crankshaft, etc., to overheat, thinning the engine oil and losing its lubricating effect. If the engine is turned off at this point, the components are in an expanded state with very small clearances, which may cause some soft metals to detach or even lead to cylinder seizure. When cooling down, never pour cold water on the engine, as this may cause the engine block to crack due to sudden cooling. Never open the radiator cap when the engine is hot to avoid being scalded by the high-pressure steam released.
19
3
Share

How to Replace the Battery in a Tiguan L Key?

The battery replacement for the Tiguan L key involves turning out the key head, removing the back cover in the direction of the arrow, using a suitable thin tool to pry out the battery from the battery compartment, placing the new battery, pressing it into the battery compartment in the direction of the arrow, and then replacing the cover. Tiguan L Seating Layout: The Tiguan L has been upgraded to a 7-seater model with a 2+3+2 seating arrangement, catering to the needs of larger families. The most notable feature is the flat-folding design of the third-row seats, providing flexible and versatile space configurations. When the third-row seats are folded down, the trunk capacity expands to 1780L, easily meeting various travel demands of consumers. Tiguan L Power: The Tiguan L 2.0T comes in two versions with different power outputs. The low-power 2.0T version delivers 186 horsepower with a maximum torque of 320 Nm, achieving maximum torque between 1500-4000 rpm and maximum power between 4100-6000 rpm, paired with a 7-speed dual-clutch transmission.
4
0
Share

Is It Serious If the Car Side Skirt Gets Scratched?

Scratches on the side skirt are not serious. Things to note: Scratches on the vehicle's side skirt are not a major concern, as the side skirt, along with fenders, hoods, and doors, are part of the vehicle's body panels. Damage to body panels does not affect the vehicle's structural integrity; you simply need to visit a 4S shop for repairs when convenient. However, one important point to note is that if the side skirt is made of metal and the primer is damaged during the collision, it is essential to repaint it as soon as possible. Otherwise, the metal part can easily rust, making future repairs more complicated. How to repair: The repair method depends on the material of the side skirt and the extent of the damage, as plastic and metal side skirts require slightly different approaches. Plastic side skirt. If the damage to a plastic side skirt is minor, usually just repainting is sufficient. If there are cracks, the entire side skirt will need to be replaced. Metal side skirt. Even if a metal side skirt is deformed, it does not need to be replaced; it can be repaired through metalworking.
4
2
Share

What are the symptoms of a malfunctioning transmission mechatronic unit?

The symptoms of a malfunctioning transmission mechatronic unit include the dashboard warning light illuminating and the car shaking. The symptoms of a faulty transmission mechatronic unit are: The gear indicator light on the car dashboard illuminates; the car shakes, the transmission fails to upshift, there is no odd gear or no even gear, and in severe cases, the vehicle may not operate normally. Solution: Take the car to a repair shop and use a diagnostic tool to check the fault codes in the transmission system's fault memory and resolve the issue; if there are fault codes indicating failure to engage gears, or the clutch unintentionally opening or closing, then it can be determined that the mechatronic unit is damaged. In this case, replacing the mechatronic control unit can solve the problem. If the transmission's mechatronic unit is damaged, it needs to be replaced; otherwise, the transmission will not function properly. Only automatic transmissions have a mechatronic unit; manual transmissions do not have one.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.