How to insert the key to start the Haval H6?

[DelKatherine]

Haval H6 key insertion and starting method is: 1. Remove the cover of the ignition switch and insert the mechanical key; 2. Press the smart key against the ignition switch, wait a few seconds, then turn the key; 3. Wait until the wrench light on the dashboard goes out. The Haval H6 is a compact 5-door, 5-seat SUV with body dimensions of: length 4653mm, width 1886mm, height 1730mm, and a wheelbase of 2738mm. The Haval H6 is equipped with a 2.0T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 155 kW and a maximum torque of 325 N·m. It features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using multi-link independent suspension.

[VanKeira]

I've been driving a Haval H6 for a while, and starting it with a physical key is quite straightforward. If it's a traditional physical key, I first sit in the driver's seat and confirm that the gear is in the P position while pressing the brake. Then, I insert the key into the ignition slot near the steering wheel and gently turn it: the first turn to the ACC position powers up the electrical components on the dashboard; another turn to the ON position initiates system self-check and preparation; finally, a quick turn to the START position fires up the engine. Once I hear the engine sound, I release the key, and it springs back to the ON position, completing the startup. If it feels stuck, don’t force it—it might be due to the key not being fully inserted or the system being locked. In such cases, it's best to turn off the power and try again or check the key battery. Stay focused and calm throughout the process to ensure a smooth and safe start. For daily maintenance, keep the ignition slot clean and free from excessive dust, and avoid prolonged exposure to moisture to prevent corrosion. Remember, new drivers will get the hang of it with a few more practices—don’t shy away from the effort.

[Adeline]

I'm in the habit of checking the vehicle condition before driving. When starting the Haval H6 with the key, if it's the keyless start smart version, I don't need to insert the key. Instead, I just firmly press the brake pedal and push the START button on the center console, and the system will automatically detect the key inside the car. If there's a physical key, I first insert it into the ignition slot and turn it twice to start the engine. Be careful not to turn the key again while the engine is running, as it may damage the ignition lock. If the key doesn't respond, the battery might be dead - try replacing it. Regularly clean the key to prevent sticking. After starting, don't rush to drive off immediately; let the engine warm up for half a minute - it's better for the car. These small details make each drive safer and more efficient.

[ArielDella]

I previously drove a Haval H6 and found its ignition system to be quite intelligent. With a traditional key inserted into the ignition hole, the steering lock mechanism would unlock; with keyless start, the key contains a chip that communicates with the vehicle. To start the engine, first press the brake pedal for safety, then manually turn the key from the OFF to the START position, or simply press the button. In case of a dead battery, use the spare key for emergency manual insertion. Always observe the dashboard indicator lights during each startup.