How to Improve the Speed of a Mixer-Pump Truck?

1 Answers
MasonFitz
07/29/25 10:25pm
To improve the speed of a mixer-pump truck, it is necessary to maximize the throttle. Overview of Pump Truck: A concrete pump truck is a machine that uses pressure to continuously transport concrete along pipelines. It consists of a pump body and delivery pipes. According to structural forms, it can be divided into piston type, extrusion type, and hydraulic diaphragm type. The pump body is mounted on the vehicle chassis, and when equipped with a telescopic or folding placing boom, it forms a pump truck. Principle of Pump Truck: The power of the concrete pump truck is transmitted from the engine to the hydraulic pump group or rear axle through the power take-off. The hydraulic pump drives the piston to operate the concrete pump. Then, using the placing boom and delivery pipes on the pump truck, the concrete is transported to a certain height and distance.
Was this review help?
9
2
Share
More Forum Discussions

How often should the BMW X1 transmission fluid be changed?

BMW X1 transmission fluid should be changed every 60,000 kilometers, but you can also refer to the maintenance manual and service records for guidance. The transmission fluid replacement method is gravity drainage, which involves loosening the oil pan bolt to allow the transmission fluid to flow out naturally under gravity. The main functions of transmission fluid are to keep the shifting system clean and to lubricate the transmission components, thereby extending their lifespan. Taking the 2019 BMW X1 as an example, this vehicle is a compact SUV under the BMW Brilliance Automotive brand, with body dimensions of 4565mm in length, 1821mm in width, and 1620mm in height, and a wheelbase of 2780mm. It is equipped with either a 1.5T or 2.0T turbocharged engine.
4
0
Share

Where is the sunroof drain tube located on the Bora?

The Bora has four sunroof drain tube locations, specifically: one each above and below the rear wheel area under the chassis; two at the corners near the windshield side of the sunroof. It's important to note that if the drain holes of the sunroof drain tubes become clogged, water leakage may occur in the headliner and interior compartment. Owners are advised to regularly clean the sunroof drain tubes. Taking the 2021 Bora as an example, its body dimensions are 4663mm in length, 1815mm in width, and 1462mm in height, with a wheelbase of 2688mm. The vehicle is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 83kW and maximum torque of 145Nm.
15
1
Share

Is the Bora a Domestic Car?

The Bora is classified as a domestic car, which refers to vehicles produced domestically, including joint-venture brands. The Bora is the first independently designed model by FAW-Volkswagen, with body dimensions of 4523mm in length, 1775mm in width, and 1467mm in height, and a wheelbase of 2610mm. The Bora is equipped with a 1.4TSI engine featuring TSI technology that combines turbocharging and direct gasoline injection. It delivers a maximum power of 96kw at 5000 rpm and a peak torque of 220nm between 1750 and 3500 rpm. The transmission is paired with a 6-speed Tiptronic automatic manual transmission.
18
0
Share

How to Open the Fuel Tank Cap of the Tiguan?

Tiguan's fuel tank cap opening method: Locate the fuel tank cap button under the left side of the driver's seat, move the driver's seat backward, and you will see a lever on the car floor marked with a fuel symbol. Manually pull the lever and lift it upward to open the fuel tank cap. The fuel tank is a container on the car for holding fuel, and it is also a specialized container in the hydraulic system for storing hydraulic oil or hydraulic fluid. The Tiguan is a 5-door, 5-seat SUV under Shanghai Volkswagen, with body dimensions of 4506mm in length, 1809mm in width, and 1685mm in height, a wheelbase of 2684mm, a turbocharged intake form, a maximum horsepower of 160ps, a maximum torque of 250nm, and a 6-speed automatic manual transmission.
13
0
Share

How to Start a Car with Push Button Start?

Starting method for push-button start cars: After the ACC light turns on, the owner presses the start button again, at which point the start button will turn green, and the car will perform a self-check. Once the self-check is completed, depress the brake pedal and press the start button once more, after which the car can start normally. Push-button start eliminates the need to find keys, insert them into the lock, or turn them; as long as the smart key is carried near the car, the vehicle will receive the induction signal, and pressing the switch while depressing the brake pedal will start the car. However, push-button start can also face some issues, such as the smart key running out of battery. In this case, it's necessary to extract the mechanical key from the smart key to open the door and start the car manually.
3
3
Share

What brand of car is Lorinser?

Lorinser is a modified version of Mercedes-Benz vehicles, created by Lorinser GmbH. Based on the original performance of Mercedes-Benz cars, Lorinser enhances the interior, exterior, suspension, braking, and safety systems for a comprehensive upgrade. Features of Lorinser: The title 'Fashion Designer of Mercedes-Benz' is well-deserved for Lorinser. It is renowned for redesigning the car body to achieve the perfect structure and aesthetic appeal, giving it a more luxurious and dynamic presence. Modification scope of Lorinser: Lorinser's modifications mainly focus on the exterior, interior, suspension, and braking systems, including thickened straight exhaust mufflers, full steel plate chassis, air suspension, larger wheels and tires, and more.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.