How to Identify the Quality of Car Window Tinting?

What is the appropriate level to fill the coolant to?

Coolant should be filled to the midpoint between the upper mark (MAX) and the lower mark (MIN). Relevant information about coolant is as follows: Replacement cycle: The shelf life of automotive antifreeze is generally 2 years. Typically, ordinary household vehicles require antifreeze replacement every 2 years or after driving 40,000 kilometers. Introduction: Antifreeze, fully known as antifreeze coolant, refers to a coolant with antifreeze properties. It is a type of coolant containing special additives, primarily used in liquid-cooled engine cooling systems. Currently, over 95% of antifreeze used domestically and internationally is ethylene glycol-based aqueous antifreeze, characterized by a high boiling point, low volatility, moderate viscosity, minimal changes with temperature variations, and excellent thermal stability, making it an ideal coolant. The primary function of antifreeze is to remove excess heat from the engine cooling system while preventing the cooling water in the pipes from freezing and expanding in winter, which could lead to radiator damage.

14

3

Share

What is the 0-100 km/h acceleration time of the CFMoto 800MT?

The 0-100 km/h acceleration time of the CFMoto 800MT is 7 seconds. Here are some details about the CFMoto 800MT: Fuel consumption: Approximately 5 liters per 100 kilometers. For comparison, a typical 125cc household motorcycle consumes about 2.5 liters per 100 kilometers, while a 500cc motorcycle consumes around 4 liters. The CFMoto 800MT is a twin-cylinder, 800cc motorcycle with a fuel consumption of about 5 liters per 100 kilometers. In congested urban traffic conditions, this can increase to 6-7 liters, while on long-distance trips at a steady speed of 80-90 km/h, it can drop to around 4 liters. Power configuration: The CFMoto 800MT is equipped with a 799cc inline twin-cylinder liquid-cooled engine, delivering a maximum power of 70 kW (95 hp) at 9000 rpm and a maximum torque of 77 Nm at 6500 rpm.

6

3

Share

What is the break-in period for a new car in kilometers, and what should be noted?

New cars generally have a break-in period of 3,000 kilometers. The following aspects should be noted for new cars: Engine: The engine speed should not be too high, preferably not exceeding 3,000 RPM, with an ideal speed range of 60-90 km/h. Warm-up: There should be a warm-up process during cold starts; wait for the water temperature to change before driving, typically around 2-3 minutes. In summer when temperatures are high, a warm-up of about 1 minute is sufficient. Driving duration: Avoid sudden acceleration and braking, and try to maintain a steady speed. During the break-in period, the maximum speed should not exceed 120 km/h, but long-term low-speed driving should also be avoided. Pay attention to gear changes. Maintenance: Avoid overloading the car with passengers or cargo. Follow the manufacturer or 4S shop's requirements to promptly perform the first maintenance.

16

4

Share

What Causes Loud Engine Noise When Accelerating Hard?

The reasons for loud engine noise when accelerating hard are: 1. Engine overheating; 2. Internal engine malfunction. An engine is a machine that converts other forms of energy into another type of energy, usually transforming chemical energy into mechanical energy, serving as the power-providing device for automobiles. Causes of automobile engine overheating: 1. The fan motor fails to operate or the fan clutch malfunctions, preventing proper cooling; 2. Blockage or pipe rupture in the three-way catalytic converter, causing exhaust obstruction and leading to engine overheating; 3. Pipe rupture in the cooling system, resulting in coolant loss and impaired heat dissipation; 4. Uneven pressure in the radiator cap, causing spring loosening and preventing tight closure; 5. Thermostat failure to open/close properly due to mechanical faults or incomplete cooling system filling.

9

0

Share

What is the Function of Transmission Fluid?

Transmission fluid serves the following purposes: reducing friction and wear, controlling clutch friction and synchronizer performance; bearing loads (low-speed high torque, vibration loads), dissipating heat, reducing vibrations and noise, removing contaminants at gear meshing points (cleaning function); preventing corrosion, pitting, and surface metal stripping, isolating metal surfaces to prevent direct metal-to-metal contact. Types of Transmission Fluid: Transmission fluid is generally categorized into three types: manual transmission fluid, automatic transmission fluid, and continuously variable transmission fluid. Manual transmission fluid is commonly referred to as gear oil. Automatic transmission fluid is commonly known as ATF (Automatic Transmission Fluid). Continuously variable transmission fluid is commonly called CVTF (Continuously Variable Transmission Fluid). Signs that indicate the need for transmission fluid replacement include: vehicle shaking, gear shifting hesitation; transmission overheating warning on the dashboard; engine stalling; unusual noises.

18

1

Share

Can the Dash Cam Continue Recording After the Engine is Turned Off?

Dash cams with parking monitoring function can continue recording, but not for long. Below is the relevant introduction: Dash Cam: A dash cam is a device that records images, sounds, and other related information during vehicle travel. After installing a dash cam, it can record the entire driving process, including video and audio, which can serve as evidence in traffic accidents. For those who enjoy road trips, it can also be used to document the journey through challenging terrains. While driving, it continuously records, simultaneously logging time, speed, and location in the footage, functioning much like a "black box." Recommendation: The camera should have a wide-angle lens to comprehensively capture the surroundings of the vehicle. However, it's important to ensure the lens angle isn't too extreme to avoid distorted footage. The dash cam should also have good recording clarity and night-time recording capability. High-definition recording depends on the main control chip of the dash cam, so car owners should pay attention to the image processing solution used in the dash cam's main control chip. Additionally, the dash cam must have sufficient storage space to enable long-duration effective recording.

17

4

Share

How to Identify the Quality of Car Window Tinting?

What is the appropriate level to fill the coolant to?

What is the 0-100 km/h acceleration time of the CFMoto 800MT?

What is the break-in period for a new car in kilometers, and what should be noted?

What Causes Loud Engine Noise When Accelerating Hard?

What is the Function of Transmission Fluid?

Can the Dash Cam Continue Recording After the Engine is Turned Off?

Can Transmission Noises Be Repaired?

What is the difference between SN and SP engine oil?

What Causes Loud Engine Noise During Acceleration?

Should Fuel Additive Be Added Before or After Refueling?