How to Identify the Manufacturing Date of a Tire?

1 Answers
RafaelAnn
07/29/25 11:52pm
The method to identify the manufacturing date of a tire is as follows: 1. Locate a set of four numbers on the tire sidewall; 2. The first two digits represent the week of the year the tire was manufactured; 3. The last two digits indicate the year of production. Tire maintenance methods include: 1. Regularly remove stones stuck in the tire treads; 2. Minimize exposure to direct sunlight; 3. Promptly check tire pressure; 4. Pay attention to suspension maintenance; 5. Regularly inspect front wheel alignment; 6. Adopt careful driving habits, choose smooth road surfaces, avoid objects that could puncture or scratch the tires, and steer clear of chemical spills that may corrode the tires.
Was this review help?
17
2
Share
More Forum Discussions

What is Tesla?

Tesla is an American electric vehicle and clean energy company that manufactures and sells electric cars, solar panels, and energy storage systems. Headquartered in Palo Alto, California, the company was founded on July 1, 2003, by Martin Eberhard and Marc Tarpenning, who named it "Tesla Motors" in honor of the physicist Nikola Tesla. Elon Musk joined the company in 2004 and led its Series A funding round. Here is some relevant information: Development History: Tesla's initial new energy vehicle startup team mainly came from Silicon Valley, adopting an IT philosophy to build cars rather than following the traditional approach of Detroit-based automakers. As a result, Tesla's venture into electric vehicles is often seen as a story of a Silicon Valley upstart challenging the Detroit giants. Logo Culture: On February 5, 2017, foreign media (VentureBeat) reported that for automakers, the car logo is as important as the car itself. Logo design thus becomes a crucial task. Tesla's T-shaped logo, which has gained widespread recognition in recent years, is not only the initials of inventor Nikola Tesla's name but also carries deeper meanings. Tesla CEO Elon Musk explained on his Twitter that this stylized "T" is also a hint at the company's products, stating that the T logo represents the cross-section of an electric motor.
6
1
Share

What are the differences between the 11th and 12th generation Corolla?

There are changes in the exterior and interior design of the 12th generation. The most fundamental difference between the 12th generation Corolla and the 11th generation is that the 12th generation Corolla is built on Toyota's new TNGA architecture. Body dimensions: The new car is 4635mm long, 1780mm wide, 1435mm high, with a wheelbase of 2700mm. The length has increased compared to the current model, while the height has been reduced. Interior: The interior design retains the basic layout of the overseas version. The high-end models feature a 12.1-inch central control screen and a PM2.5 filtration system specifically for Chinese consumers. Powertrain: It is equipped with the current model's 1.2T engine, with a maximum power of 116 horsepower (85kW), meeting the China VI emission standards. The transmission is matched with a CVT gearbox. The hybrid version's 1.8L engine has a maximum power of 95 horsepower and a peak torque of 142 N·m, while the electric motor has a maximum power of 53kW and a peak torque of 163 N·m. The combined system power is 122 horsepower, with a claimed fuel consumption of 4L/100km.
9
5
Share

Where is the USB port in the Superb?

The Superb does not have a USB port, but it does have an SD card slot. Generally, the USB ports in cars serve two functions: one is to output power for charging mobile phones, and the other is for playing music from a USB drive. However, some center console designs do not include the charging function, in which case you can only purchase a cigarette lighter car charger. Appearance: The 2013 Superb adopted more of the family design style, with a sharper-looking grille, showcasing the new brand logo. The lower grille and fog lights were completely redesigned, and LED daytime running lights were added. Additionally, the taillight design was completely changed, while the interior largely followed the design of the current model. Interior: Apart from changes in accessories, the re-optimization of storage space and the upgrade of the human-machine system are expected to enhance the riding experience further. Notably, the new Superb provides a 220V power supply for rear passengers, offering great convenience. Powertrain: The 2013 domestic Superb was equipped with three powertrains: 1.4T, 1.8T, and 2.0T. The facelifted Superb is almost certain to retain this engine lineup. However, the 2.0T engine (EA888) changed its cylinder block material from cast iron to all-aluminum, so its parameters will differ from the current model.
19
3
Share

Is it mandatory to go to the local vehicle management office for vehicle inspection?

Vehicle inspection is an annual requirement for household cars, typically conducted at the vehicle management office. However, there is no strict requirement to go to a specific office; the principle of proximity can be applied. Except for large passenger vehicles and school buses, other vehicles can undergo annual inspections in different locations. Additionally, before conducting an out-of-town vehicle inspection, you need to obtain an out-of-town vehicle inspection authorization letter from the original vehicle management office where the vehicle is registered. Below are additional details: Materials required for annual inspection: vehicle license, and a motor vehicle third-party liability insurance policy valid for one year and within its validity period. If the vehicle is purchased via installment and there is no original insurance policy, you can bring a copy of the insurance policy (stamped by the insurance company), an insurance card, and provide an explanation. For vehicle annual inspection, you need to bring the original and a copy of your ID card, the original and a copy of the vehicle license (for company vehicles, an introduction letter from the company is also required), insurance certificate, unified payment card, and fill out the "Motor Vehicle Annual Inspection Application Form" (company vehicles must be stamped with the official seal). Exhaust emission test regulations: During the test, the inspector will drive the vehicle onto the testing line. Generally, new vehicles pass easily, and once you receive a qualified exhaust emission test report, you can proceed to the window to pay and collect the emission compliance label. If the vehicle fails, it needs to be adjusted at an auto repair shop and retested, requiring another payment for the inspection fee.
16
3
Share

What is the fuel consumption of the 2.5L V6 Teana?

The Nissan Teana 2.5L V6 has a fuel consumption of 11L/100km. Here are some methods to gradually reduce fuel consumption: 1. Start slowly: When starting the vehicle, use a low gear and gently press the accelerator to gradually increase speed. Avoid suddenly flooring the accelerator, as this can significantly increase fuel consumption. A gentle start shortens the engine warm-up time and improves fuel efficiency. 2. Light acceleration and early braking: Sudden acceleration increases CO2 emissions and fuel consumption. Drive smoothly, avoiding sudden increases in engine RPM or vehicle shuddering, to save fuel. 3. Maintain proper tire pressure: Keep tires inflated to the manufacturer's recommended level. Avoid using winter tires year-round, as this can increase fuel consumption by 10%. Use winter tires only when necessary. 4. Regularly declutter the trunk: Extra weight increases the vehicle's load and fuel consumption. Even small increases in weight affect fuel efficiency, so regularly remove unnecessary items from the trunk. 5. Close windows: Open windows increase wind resistance, requiring more power and fuel to maintain speed. 6. Regular maintenance and checks: Timely oil changes reduce carbon buildup. Check and replace the air filter, clean or replace fuel injectors, spark plugs, and throttle body as per mileage recommendations. 7. Change fluids on schedule: Many owners neglect changing engine oil and transmission fluid. If gear shifts become sluggish or jerky, replace the transmission fluid promptly.
17
4
Share

Why can't the Bluetooth on Haval H6 be found?

Haval H6 Bluetooth cannot be found possibly because the Bluetooth is in an invisible state or the Bluetooth device is too far away. Bluetooth invisible state: If the car Bluetooth or mobile phone Bluetooth is in an invisible state, both parties will not be able to scan each other, and naturally, they cannot perform connection and pairing operations. Set the car Bluetooth or mobile phone Bluetooth to a discoverable state. Bluetooth device too far away: Since Bluetooth transmission has a certain distance limitation, when the mobile phone Bluetooth and car Bluetooth are too far apart, the Bluetooth device may not be found. Even if it is found, the connection may be affected due to the excessive distance.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.