How to Identify the Distance on the Right Side of the Car?

1 Answers
StMicah
07/29/25 8:56pm
Methods to identify the distance on the right side of the car are as follows: 1. Driving 60 cm from the roadside on the right: When the protruding node of the right wiper overlaps with the roadside target, the car body is still 60 cm away from the roadside. This achieves the effect of driving about 60 cm from the roadside on the right. 2. Parking on the right side: When the node of the right wiper coincides with the roadside, slightly turning the steering wheel to the left can position the car 10 cm from the roadside, achieving the effect of parking on the right side. 3. Right-side overlap: When the driver's line of sight intersects the protruding node of the right wiper with an object or solid line on the ground, the tire will run over the target seen by the driver.
Was this review help?
5
0
Share
More Forum Discussions

How many points will be deducted and how much will be fined for turning right in a left-turn lane?

Turning right in a left-turn lane is considered as not driving according to the lane markings, and will result in a fine of 100 yuan and a deduction of 2 points. The following are the detailed rules regarding vehicle lane changes: 1. Left turn: When turning left, turn to the left side of the center point of the intersection. Turn on the turn signal when turning, and use the low beam when driving at night. 2. Right turn: When turning right and encountering a vehicle in the same lane waiting for the signal to proceed, stop and wait in turn. 3. Turning without direction indication: At an intersection without directional signal lights, turning motor vehicles must yield to straight-moving vehicles and pedestrians first. Right-turning motor vehicles in the opposite direction must yield to left-turning vehicles first.
12
5
Share

How to Open a Locked Buick Excelle Door

Buick Excelle recommends going to an auto repair shop to use special tools, remove the plastic edge next to the car door, and then use an iron hook to break the plastic clips of the door, so that the door can be opened. Additional information about the Buick Excelle is as follows: 1. Exterior: The all-new Excelle adopts Buick's new-generation family design language, featuring the brand's signature winged grille with dark mesh textures and a high-gloss electroplated shield-shaped outer contour, exuding youthful vitality. The winged headlights and grille form a diving angle, creating a dynamic look. The side of the car combines agile body lines with high-gloss curved surfaces, presenting a low-front and high-rear diving posture. The winged taillights echo the headlights, while the rear spoiler reduces wind resistance and enhances handling, improving fuel efficiency. 2. Interior: The new car continues Buick's 360-degree wraparound integrated design, adopting lightweight design elements overall. The center console features a high-contrast visual effect with integrated high-gloss black and chrome strips, highlighting a sense of technology. The seats are made of rare suede fabric in its class, providing a comfortable riding experience.
6
4
Share

What are the reasons why the center rearview mirror cannot be adjusted?

The center rearview mirror may not be adjustable due to: being stuck, in which case you can move the mirror to the center position and then press the button to adjust; or wiring issues, which require inspection and repair. Below are specific introductions about the functions of the center rearview mirror: 1. Observing road conditions: It allows the driver to easily observe the road conditions behind, such as when changing lanes, by using the rearview mirror to see the situation of vehicles behind and choose the right moment to change lanes; during emergency braking, the center rearview mirror can help observe if there is a vehicle following too closely behind, allowing the driver to slightly ease the braking based on the distance ahead, leaving enough space for the following vehicle to avoid a chain collision. 2. Observing the interior: It allows the driver to easily observe passengers in the back seat without turning their head, preventing sudden accidents; the center rearview mirror can also help the driver judge the distance to the vehicle behind.
16
2
Share

What are the reasons why a four-stroke gasoline engine fails to start?

Four-stroke gasoline engine fails to start for the following reasons: 1. Compression failure: (1) Incorrect valve clearance; (2) Wear at the contact area between the valve and valve seat; (3) Wear at the cam lobe of the camshaft; (4) Poor sealing or damage of the cylinder gasket; (5) Wear of the piston rings; (6) Incorrect assembly of the camshaft timing point; (7) Malfunctioning decompression valve. 2. Ignition failure: (1) Abnormal phenomena in the ignition system such as weak ignition energy or misfiring; (2) Incorrect ignition timing; (3) Malfunctioning oil alarm device; (4) Short circuit of the ground wire; (5) Short circuit of the kill switch.
19
4
Share

Which Parts Does the Seat Belt Protect?

Seat belts protect the head and chest. Relevant information about seat belts is as follows: 1. Usage of seat belts: During the use of a seat belt, it needs to be tightened. In the event of an accident, the seat belt can hold the person in the seat. After the airbag deploys to protect the passenger, the seat belt can be appropriately loosened. 2. Function of seat belts: During driving, seat belts and airbags can be used in combination. Every car is equipped with seat belts and airbags to prevent severe injuries to the human body in the event of a traffic accident, effectively reducing the severity of injuries.
17
0
Share

What Are the Five Levels of Autonomous Driving?

The five levels of autonomous driving are L1, L2, L3, L4, and L5. Here is additional information: 1. L1 Driver Assistance: Relies on adaptive cruise control to free your feet, but hands must remain on the steering wheel, and the driver still needs to control the vehicle. 2. L2 Partial Automation: The driver must continuously monitor the vehicle's operation. 3. L3 High Automation: The driver does not need to continuously monitor the vehicle, but in certain situations, the driver must intervene as requested by the system. 4. L4 Advanced Automation: In scenarios such as highway driving or entering parking lots, the system automatically controls the vehicle without requiring driver monitoring. 5. L5 Full Automation: Fully driverless operation, where no driver is needed.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.