How to Identify Steel Belted Tires vs. Nylon Tires?

How Deep Can a Car Be Submerged Before It Can No Longer Be Driven?

When a car is submerged to the level of the intake duct, it should no longer be driven. Below are the relevant details: 1. Exhaust pipe height: This is the safe wading depth. The pressure generated by the engine during exhaust is substantial enough to expel any water that might backflow into the exhaust pipe. Maintaining sufficient and stable power can prevent water from backflowing into the exhaust pipe, allowing safe passage through water at this level. 2. Half-wheel height: At this depth, water may enter the vehicle interior. As long as the car is not submerged for an extended period, water generally will not seep in. However, if the sealing strips are aged, water might infiltrate. 3. Air intake height: This is the maximum wading depth. Once water enters the air intake, it can cause the engine to stall. In severe cases, water can be sucked into the engine, leading to permanent damage. Therefore, driving is absolutely not advisable at this water level.

17

2

Share

Under what circumstances will a car stall?

A car may stall due to the following reasons: unskilled driving techniques or improper operation; fuel pump stuck or malfunctioning leading to poor fuel supply; use of low-quality fuel causing excessive engine carbon buildup; faulty spark plugs or ignition coils resulting in multiple cylinders failing to ignite; excessive dirt accumulation on the idle control valve core and throttle body. Low-quality fuel: For automatic transmission cars, stalling is mainly caused by the use of low-quality fuel. One solution is to refuel at reputable, large-scale gas stations with higher-octane fuel, such as using 97-octane gasoline. Although more expensive, it ensures longer vehicle lifespan and better driving performance. Excessive dust: The main cause of stalling during idle is excessive dust in the air. When the engine is running, dirt accumulates on the idle control valve core and throttle body. When too much dirt builds up, the engine will have low idle speed, unstable idle operation, and may stall during idling. This issue can be resolved by simply cleaning the idle control valve.

13

4

Share

Reasons for Clicking Noise When Reversing a New Car?

Reasons for clicking noise when reversing: The noise occurs when the brake caliper hits the caliper bracket during braking while reversing. Under gravity, the brake caliper moves downward. Since the caliper and bracket are floatingly connected, when braking while reversing, the caliper is lifted upward and hits the upper bracket, producing the noise. This is normal. Braking System: The braking system can be divided into the service brake system, parking brake system, emergency brake system, and auxiliary brake system. The system used to slow down or stop a moving car is called the service brake system; the system used to keep a parked car stationary is called the parking brake system. Functions: In case the service brake system fails, the system that ensures the car can still decelerate or stop is called the emergency brake system. During driving, the system that assists the service brake system in reducing or maintaining speed but cannot bring the vehicle to an emergency stop is called the auxiliary brake system. Among all braking systems, the service brake system and parking brake system are mandatory for every vehicle.

15

5

Share

Should I Use 92 or 95 Octane Gasoline?

Whether to use 92 or 95 octane gasoline generally depends on the engine's compression ratio, which is the sole criterion for selecting gasoline grades. Generally, the higher the compression ratio, the higher the required gasoline grade. Typically, 92 octane gasoline is suitable for gasoline-powered vehicles with an engine compression ratio between 8.6 and 9.9; 95 octane gasoline is suitable for those with a compression ratio between 10.0 and 11.5; and 98 octane gasoline is suitable for vehicles with a compression ratio above 11.6. The difference between gasoline grades lies solely in the varying proportions of isooctane and n-heptane. Higher-grade gasoline has a higher proportion of isooctane, which inherently provides better anti-knock properties. Generally, engines with stronger performance require higher-grade gasoline. After all, powerful engines need high anti-knock properties to handle their robust performance, whereas weaker engines do not necessitate the use of high-grade gasoline, as they do not require such high anti-knock properties.

15

0

Share

What are the interior space dimensions of the Jinbei Haise?

The interior space dimensions of the Jinbei Haise are approximately 12 cubic meters. Below is a related introduction to the Jinbei Haise: 1. Product Introduction: The Haise brand light passenger vehicle incorporates manufacturing technology introduced from Toyota Motor Corporation of Japan, producing the RZH115L Haise series of light passenger vehicles. Based on this, the SY6480 Haise series of light passenger vehicles and over a hundred types of specialized vehicles have been developed. It features comfortable seating, superior vehicle quality, exquisite exterior styling, excellent power performance, and reliable performance, maintaining a leading position in the domestic market for similar products for many consecutive years. 2. Market Positioning: The Jinbei Haise series of light passenger vehicles, as a well-known brand in the domestic light passenger vehicle market, has held the top position in terms of market share for twelve consecutive years. Over the years of development, the Jinbei Haise has introduced multiple models, achieving not only favorable market responses but also establishing a strong reputation among consumers. Today, the Jinbei Haise stands like an 'evergreen tree' in the light passenger vehicle market, enduring and renewing over time.

13

2

Share

What are the consequences of not tightening the oil drain plug?

The oil drain plug not being tightened can lead to engine oil leakage. When the internal engine oil level falls below the lower limit of the dipstick, it can cause "dry grinding" issues in the engine's thermal components. This may eventually result in sintering and severe wear due to localized overheating. The main components affected include the crankshaft, camshaft, valve rocker arm, cylinder, piston, and bearings. In severe cases, it can lead to the complete scrapping of the engine. Below is relevant information: 1. Engine block: The block serves as the skeleton of the engine and the installation base for all its mechanisms and systems. It houses all the main components and accessories of the engine, both internally and externally, and bears various loads. Therefore, the block must have sufficient strength and rigidity. The block assembly mainly consists of the cylinder block, cylinder liner, cylinder head, and cylinder gasket. 2. Common causes of faults: Malfunctioning throttle position sensor, excessive fuel pressure, leaking cold start injector or faulty cold start control, leaking fuel injector, failed oxygen sensor, and ignition system failure.

5

3

Share

How to Identify Steel Belted Tires vs. Nylon Tires?

How Deep Can a Car Be Submerged Before It Can No Longer Be Driven?

Under what circumstances will a car stall?

Reasons for Clicking Noise When Reversing a New Car?

Should I Use 92 or 95 Octane Gasoline?

What are the interior space dimensions of the Jinbei Haise?

What are the consequences of not tightening the oil drain plug?

Water under the cabin floor mat, where does it come from?

How Heavy is a Car Battery?

What is the mantra for starting a manual transmission car?

What is the maintenance interval for Nissan vehicles in kilometers?