How to Identify Genuine Car Window Tint?

1 Answers
DiChristian
07/30/25 12:29am
Methods to distinguish genuine car window tint are as follows: 1. Legitimate brand window tints have anti-counterfeit watermarks and come with a warranty card. 2. You can take a small piece of the tint, peel off the transparent layer, and smell it. Fake tints usually have a pungent odor, while genuine ones do not. Here is some relevant information: 1. Taking the front windshield tint as an example, better quality tints have a light transmittance of over 70%, UV resistance between 98%-99%, and heat insulation of at least 48%. For side windows and rear windshields, the light transmittance should be above 60%. Choosing high-quality tints for full car application is advisable, though actual prices may vary by brand. 2. The quality of the tint can also be judged by touch. High-quality tints feel thick and smooth, with sufficient toughness. Inferior tints, on the other hand, are prone to wrinkling and feel thin and soft. If the quality cannot be determined by touch, car owners can take a small piece of the tint and scratch it on glass. If the tint easily leaves marks or breaks, it indicates a poor-quality product and should not be used.
Was this review help?
9
2
Share
More Forum Discussions

What are the Five Major Systems of a Car?

The five major systems of a car are the fuel supply system, lubrication system, cooling system, ignition system, and starting system. The fuel supply system prepares a certain quantity and concentration of air-fuel mixture according to the engine's requirements, supplies it to the cylinders, and exhausts the burned gases from the cylinders into the atmosphere. The lubrication system delivers a certain amount of clean lubricating oil to the surfaces of relatively moving parts to achieve liquid friction, reduce frictional resistance, minimize wear on components, and clean and cool the surfaces of the parts. The cooling system dissipates part of the heat absorbed by the heated components in a timely manner. The ignition system ignites the combustible mixture in the cylinders through electric sparks. In gasoline engines, a spark plug is installed on the cylinder head, with its tip extending into the combustion chamber, capable of generating electric sparks between the electrodes at the right time. The starting system refers to the entire process from when the crankshaft begins to rotate under external force until the engine starts to idle automatically. The devices required to complete this starting process are called the engine's starting system.
19
5
Share

What Causes a Car Clutch Pedal to Not Return After Being Depressed?

The reason a car clutch pedal does not return after being depressed could be due to dirty or contaminated clutch fluid, causing severe wear on the internal piston of the clutch master cylinder or blockage of the return oil passage, preventing the clutch from resetting. Alternatively, as the vehicle's mileage increases, the clutch return spring may lose tension or break, leading to the clutch pedal not returning. Symptoms of this issue include a lowered pedal height and reduced or no free play. Another possible cause is excessive wear in the clutch linkage pushrod, resulting in poor return performance. Such faults may require replacing the clutch master cylinder or linkage mechanism. Additionally, air entering the clutch hydraulic system can cause excessive clutch travel and poor return performance. If the clutch pedal has difficulty returning, the vehicle should be taken to a professional repair shop for inspection and servicing. The clutch's function is to gradually increase the driving force, ensuring smooth vehicle takeoff, temporarily disconnecting the engine from the transmission for gear shifting, preventing drivetrain overload, and reducing torsional vibration impacts from the engine to extend the lifespan of transmission gears. Clutch maintenance and servicing tasks include checking the fluid level in the clutch reservoir, inspecting the hydraulic control mechanism for leaks, testing pedal responsiveness when depressed, verifying pedal height, checking the clutch disengagement point, assessing clutch operation, and bleeding air from the hydraulic system.
4
5
Share

Can a car wrap that has been applied for 5 years still be removed?

A car wrap that has been applied for 5 years can still be removed. Superior anti-yellowing properties: Prolonged use can make the car paint appear aged. Taking UPPF invisible car wrap as an example, its superior anti-yellowing properties can keep the car looking as fresh as new for a long time, with a warranty period of up to 10 years, making the car look better. Superior anti-corrosion properties: The chemical corrosion caused by acid rain, insect remains, bird droppings, etc., to the car paint cannot be ignored. Once corroded, it can cause permanent damage. The superior anti-corrosion properties of the invisible car wrap can seamlessly help the car body resist various corrosive factors, thereby protecting the car paint from damage.
9
0
Share

Is It Normal for New Car Wheels to Rust?

Rust on new car wheels is a normal phenomenon. If the rust is only on the surface of the wheel, it will not affect future use. However, if the wheel is severely rusted or corroded, or if the aluminum alloy material is damaged, the wheel will gradually deteriorate. Causes of rust on new car wheels: prolonged exposure to humid environments, scratches on the wheels during driving, and the use of strong acid or alkaline cleaning agents during car washing, which can cause the clear coat protective layer to peel off, exposing the metal to direct contact with air. This leads to oxidation and corrosion of the wheel, resulting in rust. Methods to deal with rust on wheels: If the rust is not severe, you can first use very fine sandpaper dipped in water to sand away the rust spots. After completely cleaning the area, apply a layer of primer to prevent the rust from spreading or worsening. For new scratches, clean the area and apply primer directly. Most vehicles come with a small can of original paint. If you want the wheels to look aesthetically pleasing, you can opt for wheel repair or refurbishment, which not only removes dirt from the wheel surface but also restores the oxidized surface.
8
3
Share

Are the two attempts for Subject 1 taken consecutively?

Subject 1 provides two consecutive exam attempts. There is no limit to the number of times you can take Subject 1, and each exam session offers two attempts. If you fail both attempts, you will need to reschedule the exam. Subject 1 exam content: Basic knowledge of motor vehicles; laws, regulations, and road traffic signals; safe driving and civilized driving fundamentals; basic knowledge related to vehicle operation. Subject 1 exam procedure: Follow the instructions of the staff and collect your driving training file in order at the waiting area; Carry and present your ID card for verification by the supervising officer; Mobile phones must be turned off upon entering the exam area; No loud talking is allowed in the exam area; Regulation textbooks are not permitted in the exam area (or must be stored in a bag); After the exam, collect and keep your ID card, and submit the file to the "Document Submission Window" at the front of the exam area; Candidates who pass the exam should sign under staff guidance at the exit before leaving; Candidates who fail the exam may leave the exam area and await notification from their driving school regarding the retake schedule.
16
3
Share

What is the maximum age for holding an A1 driver's license?

The maximum age for holding an A1 driver's license is 60 years old. Upon reaching 60 years of age, drivers holding licenses for large passenger vehicles (A1), tractor trailers (A2), city buses (A3), medium-sized passenger vehicles (B1), or large trucks (B2) must visit the vehicle management office of the public security traffic management department where their driver's license was issued to exchange it for a license permitting them to drive small cars (C1) or small automatic transmission cars (C2). The conditions for applying for a driver's license upon reaching the specified age are as follows: Application materials: "Motor Vehicle Driver's License Application Form"; the applicant's identity proof; a medical certificate issued by a county-level or higher medical institution or a military regiment-level or higher medical institution; the applicant's motor vehicle driver's license; if applying through an agent, the agent's identity proof and the "Motor Vehicle Driver's License Application Form" jointly signed by the driver and the agent must be submitted. Application procedure: Drivers who reach 60 years of age and hold licenses for large passenger vehicles, tractor trailers, city buses, medium-sized passenger vehicles, or large trucks must visit the vehicle management office where their driver's license was issued to exchange it for a license permitting them to drive small cars or small automatic transmission cars. Drivers who reach 70 years of age and hold licenses for ordinary three-wheeled motorcycles or ordinary two-wheeled motorcycles must visit the vehicle management office where their driver's license was issued to exchange it for a license permitting them to drive light motorcycles.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.