How to Identify Genuine 3M Car Film?

Can brake pads be replaced without going to a 4S shop?

Brake pads can be replaced without going to a 4S shop. Brake pads, also known as brake linings, should be replaced every 30,000 to 50,000 kilometers for the front brake pads and every 60,000 to 100,000 kilometers for the rear brake pads. The brake pads of all four wheels are not replaced at the same time. Brake pads require regular inspection and timely maintenance. Brake pads are generally composed of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT4 furnace temperature tracker to ensure the temperature distribution during the coating process for quality assurance. The heat insulation layer is made of non-heat-conducting materials to provide insulation. The friction block consists of friction materials and adhesives, which are pressed against the brake disc or brake drum during braking to create friction, thereby achieving the purpose of vehicle deceleration and braking.

18

4

Share

Which gear should an automatic car be in to move forward?

An automatic car moves forward when in D (Drive) gear. An automatic transmission typically refers to a car's automatic gear-shifting mechanism, where the transmission control system automatically selects the appropriate gear based on the engine's speed and load during driving, replacing the driver's subjective judgment of timing and gear-shifting operations. Generally, an automatic transmission has six gears: P (Park) for parking, R (Reverse) for reversing, N (Neutral) for neutral, D (Drive) for moving forward, S (Sport) for climbing hills, and L (Low) for low-speed driving. The method for reversing an automatic car is: 1. Press the brake to stop the car, hold the lock switch on the gear lever, and shift to R (Reverse) gear; 2. Check the side mirrors and rearview camera to confirm there are no obstacles behind the car, and honk the horn twice to alert nearby pedestrians and vehicles; 3. Slowly release the brake to allow the car to move at a low speed.

3

5

Share

How to Reset the Tire Pressure Monitoring System on the Buick Excelle?

The method to reset the tire pressure monitoring system on the Buick Excelle is: 1. Press the MENU button on the turn signal lever to switch the small screen on the instrument panel to the vehicle information column; 2. Hold down the SET function button at the end of the turn signal lever until the display asks whether to perform tire pressure learning, then select 'Yes'; 3. Deflate the tires in the following order: left front, right front, right rear, left rear. Remove the valve caps to release air from the tires; 4. Start the vehicle and observe if the instrument lights display normally. If no warning lights flash, the vehicle's tire pressure monitoring system reset is complete. In terms of appearance, the Excelle features the new Buick family's winged grille, which complements the LED headlights. Its body dimensions are 4419mm in length, 1814mm in width, and 1487mm in height, with a wheelbase of 2685mm.

6

3

Share

How Often Should Regular Car Tires Be Replaced?

Generally, the replacement interval for regular car tires is determined based on the tire's wear indicators, typically ranging from 3-5 years or 40,000-60,000 kilometers. 1. Primarily depends on the tire's wear indicators. When the tire wear reaches the indicator position, it means the tread groove depth is less than 1.6 millimeters, and new tires should be replaced as soon as possible. 2. Replacement based on the tire's production date. The sidewall of the tire will have a 4-digit number indicating its manufacturing date, with the first two digits representing the week and the last two digits representing the year. 3. Pay attention to the actual mileage driven. Under normal driving conditions, the mileage is approximately 40,000-60,000 kilometers. Exceeding this mileage increases driving risks. 4. Check for any damage on the tread, shoulder, or sidewall, such as visible cracks, bulges, deformations, or punctures like nails.

9

5

Share

How to Adjust the Car Body When Reversing into a Parking Space?

Specific methods for adjusting the car body when reversing into a parking space are as follows: 1. After straightening the car's direction, observe the rearview mirror. Generally, at this point, observe the right rearview mirror. If the car body is already parallel to the sideline, simply continue reversing. If the car body is not parallel to the sideline, make slight adjustments until it is parallel. 2. Remember the principle of steering towards the side where the rear of the car is leaning. Note that while adjusting for parallelism, also observe the distance between the lower edge of the left rearview mirror and the front sideline of the garage. Generally, you can stop when the lower edge of the mirror aligns with the top line of the garage. Although small-angle adjustments are the rule, if the rear of the car is leaning too much, you should appropriately increase the adjustment angle, usually turning to the 12 o'clock direction, but if it's leaning too much, you can adjust to the 2 o'clock direction.

2

5

Share

Where is the battery of Audi A4 located?

Audi A4's battery is located in the trunk. Lift the floor panel, remove the spare tire, and take off the plastic cover to see the battery. The car battery, also known as a storage battery, is a type of battery that works by converting chemical energy into electrical energy. Below are some maintenance tips for Audi A4: 1. Avoid parking the car in an open parking lot for extended periods. If long-term parking is necessary, remove and take the battery with you to prevent it from freezing and getting damaged. 2. In winter, the car engine is harder to start. Each attempt to start the engine should not exceed 5 seconds, with an interval of at least 15 seconds between attempts. If the engine fails to start after several attempts, check other aspects such as the circuit, ignition coil, or fuel system. Avoid multiple continuous attempts as this can cause the battery to over-discharge and burn out. 3. Regularly charge the car battery. A battery left unused for a long time will gradually discharge on its own until it becomes unusable. Therefore, start the car periodically to charge the battery. 4. Clean the battery terminals periodically and apply specialized grease to protect the wiring harness. Regularly inspect the battery accessories and connecting wires. 5. Avoid using car electrical appliances after the engine is turned off. Using the battery alone when the engine is not generating electricity can cause damage to it.

18

4

Share

How to Identify Genuine 3M Car Film?

Can brake pads be replaced without going to a 4S shop?

Which gear should an automatic car be in to move forward?

How to Reset the Tire Pressure Monitoring System on the Buick Excelle?

How Often Should Regular Car Tires Be Replaced?

How to Adjust the Car Body When Reversing into a Parking Space?

Where is the battery of Audi A4 located?

What to Do When the Dashboard Lights of Nissan Tiida Don't Work?

What are the Lynk & Co pure electric sedans?

What to Do When a Motorcycle Engine Won't Start After Sitting for a Long Time?

Should the AC be turned on in the car during summer?