How to Identify China V Vehicles?

1 Answers
Freya
07/30/25 9:28am
Look at the car label. It can be identified from the vehicle fuel consumption label, which is usually affixed to the upper left corner of the windshield of a new car. The vehicle fuel consumption label includes information such as the company logo, fuel consumption, activation date, and record number. More relevant information is as follows: China V refers to the National Fifth Stage Emission Standard for Motor Vehicle Pollutants. The China V standard imposes relatively strict limits on motor vehicle emissions such as nitrogen oxides, hydrocarbons, carbon monoxide, and suspended particles. From China I to China V, each increase in the standard reduces single-vehicle pollution by 30% to 50%.
Was this review help?
18
5
Share
More Forum Discussions

What are the sounds of abnormal engine noises?

Abnormal engine noises can be categorized into the following types: 1. The first is a high-pitched squealing sound from the belt: This is usually caused by belt slippage. 2. The second is a sharp metallic friction sound: This is generally due to damage to the bearings of the generator, water pump, or power steering pump. 3. The third is a tapping sound in the engine compartment: Due to gravity, all the lubricating oil in the engine flows back to the oil pan after the vehicle has been parked for a period of time. During a cold start, the oil pump needs to "transport" the oil from the oil pan back through the oil passages to various moving parts and friction pairs, establishing and maintaining a certain oil pressure. During the process of oil "transportation" and oil pressure buildup, an oil film has not yet formed between the components, especially the hydraulic lifters in the cylinder head, which need to go through an oil-filling process. At this time, the valve clearance is relatively large, resulting in normal mechanical "tapping" sounds when the valves close and seat.
2
2
Share

How Many Seats for Passenger Vehicles in Beijing Do Not Require a Lottery?

In Beijing, only passenger vehicles with fewer than 7 seats require a lottery, while others do not. However, there are several types of vehicles that are exempt from the lottery. Here are the details: 1. Light panel vans: Since they are registered as trucks, they are not allowed to drive within the Fifth Ring Road from 6:00 to 23:00 every day. Additionally, they must undergo an annual inspection starting from the date of registration. During the inspection, it must be confirmed that the cargo partition is securely installed, the vehicle body is marked with 'Closed Truck' and the total weight, and reflective stickers are applied as required. The service life of these vehicles is 15 years. 2. Beijing-licensed vehicles auctioned by the court: These vehicles are usually seized by the court due to the original owner's debt or other reasons and then auctioned to settle the debt. However, it is important to note that to qualify for the auction, applicants must have participated in the lottery but failed to win. In other words, you must already be eligible for the Beijing passenger vehicle lottery to apply for the auction; otherwise, you cannot participate.
1
3
Share

What is the 0-100 km/h acceleration time of the Subaru BRZ?

Subaru BRZ manual transmission version has a 0-100 km/h acceleration time of 7.6 seconds, while the automatic transmission version takes 8.2 seconds. The following are the specific details of the Subaru BRZ: 1. In terms of appearance, the Subaru BRZ is equipped with an STI sports body kit compared to the previous model, including a front lip and side skirts. 2. In terms of configuration, the Subaru BRZ adds a tire pressure monitoring function and upgrades the suspension system with SACHS brand shock absorbers from ZF. It also adds welcome lights, dashboard display brightness adjustment function, and a turn signal lever that flashes three times and automatically resets. 3. The BRZ is powered by a 2.0L horizontally opposed four-cylinder engine, paired with a 6-speed manual transmission, delivering a maximum power of 147 kW and a peak torque of 205 N·m.
5
5
Share

How to Turn On the High and Low Beams on a Volkswagen?

Volkswagen's high and low beam switch is located on the left side of the steering wheel, as part of a set of lighting controls. Below is a detailed introduction to the adaptive high and low beam function: 1. Adaptive high and low beams refer to the vehicle's headlights automatically switching between high and low beams during nighttime driving. This is achieved through sensors, typically a camera mounted on the inside of the windshield, which detect oncoming or same-direction vehicles and pedestrians. This allows the driver to focus more on driving without the need to manually switch between high and low beams frequently. 2. The car's adaptive high and low beam lighting system uses a camera located on the rearview mirror to detect vehicles ahead, with a detection range of up to 400 meters. If an oncoming vehicle is detected, the system selectively blocks the high beam light range to avoid shining directly on the vehicle, ensuring clear visibility for the driver without affecting the oncoming vehicle. When the system detects no vehicles ahead, it automatically switches back to high beams.
10
1
Share

Can 75% Alcohol Be Brought into a Car?

From a safety perspective, 75% alcohol is not allowed to be brought into a car. Here are the detailed explanations: 1. Alcohol is a Class A fire hazard: The ignition point of alcohol is only 20°C. If the temperature inside the car is too high, it may cause spontaneous combustion. Therefore, it is best not to place alcohol in the car. If alcohol must be stored in the car, it is recommended to keep it in a well-sealed bottle, placed in a spot away from sunlight and relatively cooler, or park the car in a shaded area. 2. The flash point of 100% alcohol is around 12°C, while 75% alcohol has a flash point of approximately 22°C: The so-called "flash point" refers to the lowest temperature at which a mixture of fuel and outside air can ignite and immediately burn when exposed to a flame. Simply put, 75% alcohol can easily ignite or even explode at a minimum temperature of 22°C.
20
2
Share

What is the equivalent of 4.0L in terms of turbocharged engines?

4.0T engine's power output is roughly equivalent to a 5.0-liter naturally aspirated engine, and the amount of air intake for a 4.0T engine is also approximately equal to that of a 5.0-liter naturally aspirated engine. When choosing a car's displacement, you can make your selection based on your usual driving environment. If most of your driving is done in urban areas, a naturally aspirated engine might be the better choice. Additional information: 1. Naturally aspirated engine: A naturally aspirated engine delivers atmospheric pressure to the combustion chamber without the assistance of any supercharger. Naturally aspirated engines provide a certain level of smoothness to the vehicle, offer good fuel efficiency, and have relatively low maintenance costs. Most early vehicle models were equipped with naturally aspirated engines, with turbocharged engines becoming more prevalent later. 2. Turbocharged engine: A turbocharged engine adds a turbocharger to the base engine. The turbocharger compresses air to increase the vehicle's air intake, thereby delivering greater power output to the engine. Turbochargers can be categorized into mechanical superchargers and turbochargers, with the latest product being pressure wave superchargers.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.