How to Identify China IV and China V Vehicles?

What are the differences between the 2018 and 2020 Toyota C-HR models?

The differences between the 2018 and 2020 Toyota C-HR models: 1. Exterior: The design of the 2020 model remains unchanged, continuing the original avant-garde and stylish look, which still stands out as the most distinctive SUV in its class. The most noticeable exterior difference is the removal of privacy glass, making it appear more transparent. 2. Interior: The original design is maintained, with the Leading Edition and higher versions upgraded to 10-way power-adjustable seats, while the Luxury Edition and Leading Edition now feature leather seats. All models have added a diamond-shaped SRS logo on the C-pillar, and all models still come standard with 10 SRS airbags. 3. Powertrain: The 2020 Toyota C-HR continues to offer only one engine option—the TNGA architecture-based Dynamic Force series 2.0L engine, with a maximum power output of 171 horsepower and peak torque of 203 N·m. Paired with the engine is a CVT transmission that simulates 10 gears, offering a 20% faster shift speed compared to traditional CVTs.

18

2

Share

What is the function of Prado KDSS?

The functions of Prado KDSS are as follows: 1. It is an adjustable damping stabilizer bar independent of the suspension system. During highway driving, it tends to be rigid, increasing the vehicle's lateral support force, reducing suspension travel, and improving driving stability. On off-road surfaces, it releases restrictions, increases travel, and enhances the vehicle's passing ability. 2. In KDSS conventional mode, when the vehicle is in a turning state, the outer suspensions of the front and rear wheels are compressed, and the inner suspensions are extended. This causes the stabilizer bar to twist, resisting body roll. The two pipelines connected between the two hydraulic pumps have no fluid flow, working like a normal suspension but effectively improving anti-roll capability. 3. When KDSS is in off-road mode, if one of the four wheels encounters an obstacle and is lifted, the suspension of the lifted wheel is compressed, and the stabilizer bar rises together with the hydraulic pump. Fluid flows between the two pipes of the front and rear hydraulic pumps, absorbing the twist of the stabilizer bar. Since the stabilizer bar does not twist, the suspension travel is larger than that of a normal suspension, and it can be adjusted according to different road conditions.

9

0

Share

Where is the location to add windshield washer fluid in the Bora?

The windshield washer fluid filling location for this model is at the lower left corner of the engine compartment. The windshield fluid filler is an upright tubular bottle neck. When you need to add windshield washer fluid, first open the car hood, then locate the windshield washer fluid filler at the lower left corner of the engine compartment, and finally open the blue cap to add the fluid. Windshield washer fluid is the common name for automotive windshield cleaning solution. Standard automotive windshield washer fluid consists of water, alcohol, ethylene glycol, activators, and corrosion inhibitors. It can clean various dirt on the windshield. When you need windshield washer fluid, simply press the windshield washer switch, and the wipers will spray the fluid to clean the windshield. When adding windshield washer fluid in winter, first use up the old fluid in the car, then add new antifreeze windshield washer fluid. Windshield washer fluid not used in winter can be used in summer, but not vice versa. Do not use tap water as a long-term substitute for windshield washer fluid, as it may cause the wipers to malfunction.

10

4

Share

How to Remove the Infotainment System in the 10th Generation Accord?

Here are the steps for removing the infotainment system in the 10th Generation Accord: 1. First, remove the plastic trim strip on the dashboard near the passenger side and the small plastic cover for the push-start button. 2. Next, remove the right-side panel, the right ventilation duct assembly, and the silver trim strip on the dashboard. 3. Finally, remove all the decorative panels around the gear shift, and the infotainment system removal will be complete. Below is some basic information about the 10th Generation Accord: 1. The 10th Generation Accord is a model under Honda, with body dimensions of 4893mm in length, 1862mm in width, and 1449mm in height, and a wheelbase of 2830mm. 2. In terms of appearance, the 10th Generation Accord features a bold design with a coupe-like style, a front face adorned with thick chrome trim that connects to the winged full-LED headlights on both sides.

8

4

Share

Is It Dangerous to Keep Spray Paint in the Car?

Keeping spray paint in the car may be dangerous. It is best not to leave it in the vehicle. The paint may contain heavy metals such as lead, cadmium, and iron. Specific details are as follows: Cleaning Spray Paint: If the spray paint is water-soluble, it can be rinsed off directly with water. However, for non-water-soluble spray paint, you can use cooling oil to clean it. Apply the cooling oil to the painted area, wait for a few minutes, then wipe it off with a cotton ball, and finally rinse with clean water. Alternatively, you can use alcohol, paint cleaner, or other solvents for cleaning. Precautions When Using Spray Paint: Shake the can evenly to fully vaporize the paint. When spraying, focus on achieving an even coat. The nozzle should not be too close or too far away—about 20 centimeters is ideal. Also, ensure the spray angle is perpendicular to the surface. Avoid spraying too much at once (or moving too slowly). For deeper damage, spray once, wait a few minutes, and then spray again. If you have never used a spray can before, practice on a scrap piece of material first.

4

0

Share

What is the battery model for the Hyundai Elantra?

The battery model for the Hyundai Elantra is 12V60Ah. Here is an introduction to the Hyundai Elantra: 1. The Hyundai Elantra is equipped with two types of engines, one is a 1.6L naturally aspirated engine, and the other is a 1.8L naturally aspirated engine. 2. The 1.6L naturally aspirated engine delivers 128 horsepower and a maximum torque of 156 Nm. The engine's maximum power is achieved at 6300 rpm, and the maximum torque is achieved at 4850 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 6-speed manual transmission or a 6-speed automatic transmission. 3. The 1.8L naturally aspirated engine produces 146 horsepower and a maximum torque of 175 Nm. The engine's maximum power is achieved at 6500 rpm, and the maximum torque is achieved at 4700 rpm. This engine also features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 6-speed manual transmission or a 6-speed automatic transmission.

11

5

Share

How to Identify China IV and China V Vehicles?

What are the differences between the 2018 and 2020 Toyota C-HR models?

What is the function of Prado KDSS?

Where is the location to add windshield washer fluid in the Bora?

How to Remove the Infotainment System in the 10th Generation Accord?

Is It Dangerous to Keep Spray Paint in the Car?

What is the battery model for the Hyundai Elantra?

What is the purpose of Audi's Side Assist System?

What is the power output of the BYD Han EV charging station?

What's the issue when the gear indicator light flashes on a Golf 6?

Is the Corolla's timing belt a chain?