How to Identify China 5 and China 6 Standards?

What is the normal value for ignition timing?

The normal value for ignition timing is between 8 and 10. The adjustment method for ignition timing is as follows: 1. Check the contact gap of the damaged electrical components and adjust if necessary. The normal contact gap is 0.35 to 0.45mm; 2. Manually rotate the engine to position the first cylinder piston at the top dead center of the compression stroke. The method involves removing the spark plug of the first cylinder, blocking the spark plug hole on the cylinder head with a finger, and turning the crankshaft until a feeling of atmospheric pressure is detected, then slowly rotating the crankshaft; 3. Loosen the fixing screw of the clamp plate on the electrical housing, remove the central high-voltage wire from the distributor cap, keeping its end 3 to 4mm away from the cylinder block, turn on the ignition switch, then rotate the disconnected electrical housing in the normal direction of its axis rotation to close the contacts; 4. Secure the electrical housing to the clamp plate with the fixing screw, put on the distributor cap, and replace the spark plug; 5. Ignite in the normal rotation direction, connect the high-voltage wires to the cylinders in the ignition sequence, with the high-voltage wire of the first cylinder inserted into the socket of the ignition side electrode. The adjustment is now complete.

5

4

Share

How often should the transmission fluid in the Lingdong be changed?

According to the manufacturer's maintenance manual, the transmission fluid in the Lingdong should be changed every 100,000 kilometers. However, in actual driving conditions, it is recommended that owners change the fluid every 60,000 to 100,000 kilometers due to varying usage scenarios. Over time, the viscosity of the transmission fluid can become thicker, leading to higher temperatures, which not only accelerates internal mechanical wear but also reduces lubrication and sealing performance. This can result in symptoms such as rough shifting, delays, jerking, and poor smoothness, and in severe cases, can damage the transmission. Transmission fluid is divided into manual transmission fluid and automatic transmission fluid. Below is an introduction to the use of these two types of transmission fluid: 1. Manual transmission cars have a relatively simple internal structure and lower precision, so the transmission fluid mainly serves a lubricating function. Generally, it should be changed every 3 years or 100,000 kilometers. 2. Automatic transmissions are more complex, with the transmission fluid not only providing lubrication and cooling but also being used for internal shifting via hydraulic pressure. If the transmission fluid becomes too thick, it can significantly damage internal components and cause issues such as delayed shifting and jerking during gear changes. Therefore, due to the complex operating conditions, it is best to change the fluid approximately every 60,000 to 100,000 kilometers.

18

1

Share

What is the difference between Volvo S90 B5 and T5?

The differences between Volvo S90 B5 and T5 are as follows: 1. Different maximum engine horsepower: The Volvo T5 has a maximum engine horsepower of 254 hp; the Volvo B5 has a maximum engine horsepower of 250 hp. 2. Different maximum engine power: The Volvo T5 has a maximum engine power of 187 kW; the Volvo B5 has a maximum engine power of 184 kW. 3. Different engine maximum power speed: The Volvo T5's engine reaches maximum power at 5500 rpm; the Volvo B5's engine reaches maximum power between 5400 and 5700 rpm.

19

1

Share

Service Life of the Timing Chain in the 2013 Magotan?

2013 Magotan timing chain typically requires replacement every 150,000 kilometers. Additional details are as follows: 1. Lubrication: The timing chain relies on engine oil for lubrication. If the engine oil is not changed for an extended period or is of poor quality, it can accelerate wear and reduce the timing chain's lifespan. However, even when the timing chain reaches the end of its service life, it will not break immediately. 2. Inspection: Some vehicles can use computer diagnostics to determine if replacement is necessary. If the inspection exceeds the maximum threshold, timely replacement is required even if there are no apparent abnormalities, as the risk of tooth jumping and valve collision is significantly increased.

4

5

Share

How Often Should the Catalytic Converter Be Replaced?

The catalytic converter should be replaced every 10,000 to 20,000 kilometers. Maintenance tips for the catalytic converter: 1. Fuel quality selection: Avoid using low-quality gasoline. When fuel quality is poor, sulfur, phosphorus, lead in the fuel, and manganese in the anti-knock agent can form chemical complexes inside the catalytic converter after combustion, leading to clogging over time. 2. Cleaning: Typically, the catalytic converter should be cleaned every 30,000 kilometers. If you notice increased fuel consumption or reduced power, inspect and clean the catalytic converter as needed. Clean the catalytic converter each time the fuel injectors, throttle body, and intake system are serviced. Before annual vehicle inspections, clean the catalytic converter to ensure smooth passage of the emissions test.

9

2

Share

How to Maintain a Car in General?

General car maintenance includes the following: 1. Tire Maintenance: Tire care is crucial as the tires and rims are the most prone to dirt. Before cleaning the tires, prepare a long-handled brush. Avoid using the brush on chrome-plated mirror surfaces to prevent noticeable scratches. If the tires are not too dirty, general cleaning agents can be used. For heavily soiled tires, purchase professional cleaning agents. 2. Car Paint Maintenance: The effect of paint sealing typically lasts between 3 months to half a year, while coating lasts over half a year. It is recommended to reseal or recoat periodically to reduce the frequency of car washes. Avoid waxing and polishing the vehicle as much as possible. Promptly remove corrosive substances like bird droppings. Park the car in a shaded area to avoid prolonged sun exposure, especially for white cars. Avoid wiping the car surface directly with a duster or dry cloth. Instead, rinse off dust with water and then wipe dry with a clean, absorbent cloth. Do not let the car air dry naturally after rinsing. 3. Interior Maintenance: Regularly visit a 4S shop for maintenance of carpets, shoe marks on the lower part of inner door panels, dashboard, and roof. Strictly follow the three-step process of dust removal, cleaning, and maintenance to thoroughly clean and maintain the dashboard, roof, seats, floor mats, and inner door panels. 4. Check Engine Oil Level: Use the dipstick to check the oil level. If the level is between the F and L marks, it is within the normal range. If it is below L, add the specified type of engine oil. After adding oil, the level should ideally not exceed the F mark.

14

3

Share

How to Identify China 5 and China 6 Standards?

What is the normal value for ignition timing?

How often should the transmission fluid in the Lingdong be changed?

What is the difference between Volvo S90 B5 and T5?

Service Life of the Timing Chain in the 2013 Magotan?

How Often Should the Catalytic Converter Be Replaced?

How to Maintain a Car in General?

What is the fuel tank capacity of the Changan CS75?

How to Check When Your New Energy Vehicle Quota Will Be Allocated?

Do I need to maintain my new car every six months even if I don't drive it much?

Will Brake Caliper Covers Affect Heat Dissipation?