How to Identify Car Scratches?

1 Answers
LandonLee
07/29/25 3:46pm
It depends on the degree of paint exposure at the scratched area. A slight surface scratch means the clear coat is penetrated and the color coat is damaged, but the color coat is not fully scratched through. A moderate scratch refers to damage that has penetrated both the clear coat and color coat, but hasn't reached the primer layer. Such scratches are usually caused by sharp objects. A deep scratch means not only the clear coat and color coat are penetrated, but also the primer layer is scratched through. This type of scratch can only be repaired by repainting.
Was this review help?
7
1
Share
More Forum Discussions

What is the difference between Kawasaki H2 and Kawasaki H2R?

The differences between Kawasaki H2 and Kawasaki H2R are: 1. Different power: The maximum power of the Kawasaki H2 engine is 200ps; the maximum power of the Kawasaki H2R engine is 310ps. 2. Different tire sizes: The front tire size of the Kawasaki H2 is 120/70r17m/c, and the rear tire size is 200/55r17m/c; the front tire size of the Kawasaki H2R is 120/600r17, and the rear tire size is 190/650r17. Taking the 2021 Kawasaki H2R as an example, its body dimensions are: length 2070mm, width 770mm, height 1160mm, and seat height is 830mm.
3
3
Share

What Causes the Engine to Feel Sluggish and Lack Power During Acceleration?

Reasons for the engine feeling sluggish and lacking power during acceleration: 1. Carbon buildup issues: This includes carbon deposits in the cylinders, throttle body, spark plugs, and intake system; 2. Fuel system problems: Using an incompatible fuel grade can reduce the car's power output and performance; 3. Intake system issues: Air is one of the engine's power sources. If the air filter becomes clogged due to prolonged use without cleaning, insufficient air intake will result in an overly rich air-fuel mixture, reducing engine power; 4. Engine overheating: Insufficient engine oil, low engine coolant levels, or malfunctioning engine cooling systems can increase engine load, leading to poor heat dissipation, increased mechanical wear, and reduced engine power, resulting in sluggish acceleration.
17
4
Share

How to turn on the high beam of Buick GL8?

The method to turn on the high beam of Buick GL8 is as follows: 1. The switch is located on the left front side of the steering wheel; 2. There is a round switch on the left side, turning it to the right and pulling it back will turn on the high beam. Taking the 2021 Buick GL8 as an example, its body dimensions are: length 5238mm, width 1878mm, height 1776mm, wheelbase 3088mm, fuel tank capacity 66l, and trunk capacity 475l. The 2021 Buick GL8 is equipped with a 2.0t turbocharged engine, with a maximum horsepower of 237ps, maximum torque of 350nm, maximum power of 174kw, and is paired with a 9-speed automatic manual transmission.
17
5
Share

Should the Classic Focus use 92 or 95 octane gasoline?

The Classic Focus uses 92 octane gasoline. Precautions for refueling are: 1. Choose to refuel when the temperature is relatively low; 2. If the car is not used for a long time or used infrequently, keep a small amount of fuel; 3. Do not refuel when a tanker truck is unloading; 4. Turn off the engine when refueling a gasoline vehicle. Taking the 2020 Classic Focus as an example, its body dimensions are: length 4368mm, width 1823mm, height 1483mm, with a wheelbase of 2648mm. The 2020 Classic Focus is equipped with a 1.5L naturally aspirated engine, with a maximum horsepower of 122PS, a maximum power of 90kW, a maximum torque of 152Nm, and is paired with a 6-speed automatic manual transmission.
20
5
Share

How often should halogen headlight bulbs be replaced?

Halogen headlight bulbs should be replaced every six months. The steps for replacing the bulb are: 1. Open the engine compartment hood and locate the dust cover behind the headlight assembly. Twist the dust cover off in the direction of the threads; 2. After removing the dust cover, find the bulb socket inside the headlight assembly. Pinch the wire clip next to the socket, and once the clip releases, the bulb can be removed; 3. Install the new bulb, reattach the dust cover, and close the engine compartment hood. Types of automotive lighting: 1. Headlights, which are the front-end lighting of the car and are divided into low beams and high beams; 2. Fog lights, which are used in foggy conditions when visibility is poor; 3. Brake lights, which illuminate when braking and are installed at the rear of the car.
12
4
Share

Why are some sections of the highway speed-limited to 100?

Because the road conditions on these highways are not very good, and if vehicles travel at higher speeds, it may pose a danger, hence the speed limit is set at 100. Here is some relevant information about driving on highways: 1. Introduction to highways: Highways refer to high-speed roads, which are compared to medium-speed and low-speed roads. In environments where low speed is the norm, low speed is considered the standard or usual speed, while in environments where medium speed is the norm, medium speed is considered the standard or usual speed. 2. Precautions before driving on highways: Check the weather and road conditions, perform a safety inspection on the vehicle, plan the driving route in advance, carry a vehicle breakdown warning sign and a fire extinguisher, and determine the driving and rest schedule in advance.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.