···
Log in / Register

How to Identify an Imported Car?

1 Answers
DeLuna
07/29/25 9:01am

Here are the methods to determine whether a car is imported: 1. Appearance: If you are familiar with car brands, those with very fine craftsmanship, harmonious shapes, and smooth lines are likely to be imported cars. 2. Sub-brands: For full-line brands like Volkswagen and Audi, it may not be obvious which models are imported, but by looking at sub-brands like A4 and TT, you can tell that the TT is an imported car because it is not domestically produced. Some brands do not have factories in China, so all their cars are imported, such as Renault. 3. Rear badges: Domestically produced cars have Chinese characters on the rear. Besides the Chinese badges, you can also check the Vehicle Identification Number (VIN), a 17-digit code. If the first letter is not "L," it is an imported car—this is the most accurate method. The VIN is located at the bottom left corner of the windshield and can be seen from outside the car. For example, a Subaru VIN like JF1SH52F89G071375 starts with "J," indicating the manufacturer is in Japan.

Was this review help?
9
0
Share
More Forum Discussions

What is the reason for the 'bootopen' display on a Ford vehicle?

When this letter prompt appears on the dashboard, it indicates that the vehicle's trunk door is not properly closed, and the trunk door needs to be closed again. Here is more information about Ford vehicles: 1. Background: Ford is an American automobile brand, one of the most famous car brands in the world, and was once one of the largest automobile manufacturers globally. The brand was established in 1903. 2. Joint venture brands: The first joint venture brand is Changan Ford, and the second joint venture brand is Jiangling Ford. Changan Ford has a variety of products, including the Focus model, Escort model, Taurus model, Mondeo model, Edge model, Kuga model, Explorer model, and others.
15
3
Share

Where is the tire pressure monitoring located on the Lamando?

Lamando's tire pressure monitoring button is the first one on the right side of the gear shift. Relevant information is as follows: 1. Introduction: Lamando's tire pressure monitoring system automatically monitors tire pressure in real-time during driving and alerts the driver in case of tire leaks or low pressure to ensure driving safety. 2. Tire pressure: When tire pressure is too high, it reduces the contact area between the tire and the ground, increasing the pressure the tire bears and affecting traction. Additionally, when driving over bumps or uneven roads, insufficient space inside the tire to absorb vibrations can compromise driving stability and comfort, as well as increase impact on the suspension system, posing potential hazards. Moreover, the risk of tire blowouts in high temperatures also increases accordingly.
13
1
Share

How Many Times Do You Usually Need to Book for Subject One Before Success?

Generally, one booking attempt is sufficient to secure an appointment, as there are no restrictions on booking for Subject One. Here are some important notes for the Subject One exam: 1. After registration, it's 'one test with one retake.' If you fail, you can retake the exam an unlimited number of times with a one-week interval between attempts. Each 'one test with one retake' unit requires waiting one week to re-register if failed. 2. If you register but fail the theoretical exam, and only paid the registration fee without passing Subject One, this situation means you haven't officially started the driver's license process, so it remains valid indefinitely. 3. If you've already taken Subject One, the validity period is 3 years. 4. If you fail the exam, you can apply for a retake immediately. On-the-spot retakes are possible, but if not taken the same day, you must book in advance. 5. Booking for Subject One doesn't guarantee success; confirmation is subject to SMS notification. You can keep trying to book if unsuccessful.
7
2
Share

How is speeding calculated?

The calculation formula for speeding is (actual speed minus the specified speed limit) divided by the specified speed limit multiplied by 100 percent. Speeding refers to the driver's operating speed exceeding the legal or regulatory specified limits. If the speed exceeds the limit by less than 10 percent, the driver will receive a warning reminder without fines or penalty points. Below are three scenarios of penalty points for speeding: 1. For ordinary small motor vehicles, speeding between 20 percent and 50 percent results in 6 penalty points; 2. For medium-sized or larger passenger and cargo vehicles, school buses, and dangerous goods transport vehicles speeding between 20 percent and 50 percent on non-highways or urban expressways, 6 penalty points are issued; 3. For medium-sized or larger passenger and cargo vehicles, school buses, and dangerous goods transport vehicles speeding on highways or urban expressways but not exceeding 20 percent, 6 penalty points are given.
1
1
Share

Do you need to reverse into the parking space from both left and right sides?

Reversing into the parking space requires doing it from both the left and right sides. Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. The test items for small cars C1 and C2 include five mandatory tests: reversing into the parking space, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as the S-curve). Below are the precautions for the Subject 2 test: 1. Fasten your seatbelt: Buckle up immediately after getting into the car, and remember not to fasten it backward or on the passenger side, otherwise the system will directly judge the test as a failure. Do not unfasten the seatbelt at any time during the test. 2. Adjust the seat, etc.: After getting into the car, adjust the seat, adjust the rearview mirror, fasten the seatbelt, turn on the left turn signal, shift into first gear, and release the handbrake. These six steps are indispensable. Make sure all preparations are complete before starting. 3. No stopping during the process: There is no time limit for reversing into the parking space, but it is important to note that you cannot stop during the process. If the wheels remain stationary for 3 seconds, the system will judge it as a mid-process stop. Therefore, controlling the speed is crucial. 4. The time for starting on a slope is 30 seconds: The time for starting on a slope is 30 seconds, and the system will give a voice prompt every 10 seconds. Exceeding 30 seconds will result in an immediate failure.
18
2
Share

What is the tire specification for the Q5?

The tire sizes for the Q5 vary depending on the configuration, including 235/55-R19 and 255/45-R20 models. Here are some extended methods to determine whether tires need replacement: 1. Tire aging, mainly visible on the tire sidewalls and tread patterns. 2. The tread wear reaches the limit marker or even falls below it. 3. Tire bulging occurs, leading to uneven force distribution and a high risk of explosion. 4. Assess the depth of punctures or the extent of wear to decide whether to repair or replace the tire directly. 5. If the tire sidewall is damaged, it usually requires immediate replacement. 6. If the tire has been repaired too many times, it is not advisable to continue repairs, and it should not be driven on.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.