···
Log in / Register

How to Identify a New Car?

3 Answers
VonIsla
09/03/25 6:38am
Distinguishing whether a car is new can be determined by its manufacturing date and brake discs. Here are some relevant details on how to identify a new car: 1. Check the manufacturing date: The manufacturing date of the vehicle should match the date on the certificate of conformity, and it is usually difficult to alter. If the manufacturing date exceeds 15 days, then it is considered an old car. 2. Inspect the brake discs: Most small passenger vehicles nowadays are equipped with disc brakes (at least the front brakes are disc brakes), making the brake discs a very reliable indicator. Typically, after driving more than 200 kilometers, the brake pads will leave noticeable marks on the brake discs.
Was this review help?
18
2
Share
McJoel
09/15/25 8:04am
I mainly focus on several aspects: whether the car paint is glossy and smooth without minor scratches, especially in corners like the edges of the doors, which are most prone to bumps during transportation. The interior should show no signs of use; the protective film on the new car seats should still be intact, the floor mats should be clean without dust, and even the steering wheel and infotainment screen should have no fingerprints. Opening the engine compartment reveals a clean interior, like a newly unpacked appliance, and the mileage displayed on the dashboard at startup is usually within 50 kilometers. If the tire hairs are neatly standing upright, it's a sign of a new car, and the brake discs should feel smooth without noticeable wear marks. Finally, check the vehicle's manufacturing date on the factory plate; if it's over six months old, it might be a stock car rather than a brand-new one. If all these criteria are met, it's essentially a new car.
Was this review help?
7
3
Share
Expand All
McEsther
10/29/25 8:42am
Identifying a new car is easy by observing details. First, check the production date code on the windshield—the numbers and dots should be clear and intact with no signs of replacement. The seat stitching should be neat and fresh, with no sagging when you sit down. The hubcaps should be clean and unscratched. Unscrew the fuel cap and smell the gasoline; if it has a cleaning agent odor, it might be refurbished. Take a short drive and listen to the engine—a new car idles as steadily as a clock with almost no noise. The windows should roll up and down smoothly and silently, and all rubber seals should be tight and elastic. Also, carefully inspect dust-prone areas like air vents and cup holders—a new car won’t even have a single strand of hair inside. Checking these small details will give you confidence.
Was this review help?
6
0
Share
Expand All
More Forum Discussions

Can variable lanes go straight?

Variable lanes cannot go straight. Here is a detailed introduction to variable lanes: Variable guide lane lines: Variable guide lane lines mean that after entering the lane, there is more than one lane direction. For example, some intersections allow right turns and going straight, or U-turns and left turns are combined into one lane. Variable guide lanes are flexible, unlike ordinary lane indication lines. Ordinary lanes only allow going straight or turning left as indicated. Generally, such lanes are set up on road sections with relatively complex traffic. Follow the instructions: When encountering such lanes, just follow the instructions of the variable lanes. However, there are time restrictions, and the direction of travel cannot be chosen freely at any time. Variable lanes are lanes between zigzag white solid lines.
13
2
Share

What is an Automotive Oil Seal?

An oil seal is a mechanical component used to seal oil. Below is relevant information: Oil Seal: An automotive oil seal is a mechanical component used to seal oil (oil being the most common liquid substance in transmission systems). It isolates the components requiring lubrication in the transmission system from the output components, preventing lubricant leakage. It also serves to prevent fluid or solid particles from leaking between adjacent mating surfaces and to keep external contaminants (such as dust and moisture) from entering the internal parts of machinery and equipment. Representative Form: The representative form of an oil seal is the TC oil seal, which is a double-lip oil seal fully encased in rubber with a self-tightening spring. Common oil seals often refer to this type of TC skeleton oil seal. Applications of Automotive Oil Seals: Engine: Crankshaft—front and rear crankshaft oil seals. Valve: Valve oil seal (engine repair kit O-ring) (distributor oil seal, water pump oil seal, balance shaft oil seal, oil pump oil seal, etc.). Camshaft: Camshaft oil seal. Transmission: Transmission—front and rear transmission oil seals. Shift lever oil seal (transmission repair kit O-ring) (transfer case—front and rear transfer case oil seals). Rear Axle: Front and rear half-shaft oil seals. Differential: Front/rear angular oil seal, front/rear wheel oil seals. Steering Oil Seal: Power steering oil seal (front half-shaft oil seal).
4
2
Share

Is It Normal for a Car's Exhaust Pipe to Drip Water in Summer?

It is quite normal for a car's exhaust pipe to drip water. This indicates that the engine is working properly, with complete combustion and effective atomization. If the exhaust emits mist, it means the engine is in good condition (this can be observed during winter). Exhaust pipe dripping water: The reason the car's exhaust pipe drips water is that the complete combustion of gasoline produces water and carbon dioxide. Causes of dripping water: At high temperatures, water exists as steam, which is colorless and transparent. However, when the temperature drops below 100 degrees, the steam condenses into water. If the condensed water droplets are very small and suspended in the air, the steam appears as white smoke. When the ambient temperature is low, the white smoke from the exhaust pipe is actually steam. If the condensed water droplets accumulate, they turn into water.
13
0
Share

What are the contents of forklift safety training?

Forklift training content includes forklift driving and comprehensive operation, key points and requirements for loading and unloading goods, as well as the basic principles and structure of forklifts, daily maintenance and regular inspections, introduction to basic knowledge of steering systems, masts, and forks, etc. Additional information: Safety aspects: The hazards of forklifts, pre-operation inspections of forklifts, safety requirements during forklift operations, and forklift safety precautions. Basic operations: Basic requirements that drivers should meet in daily operations, driver safety insurance, starting, forklift driving, forklift operations, forklift parking, forklift charging, forklift maintenance, handling of forklift accidents, safety of stackers, precautions for transporting dangerous goods, pre-operation checks, and daily maintenance.
17
2
Share

Where is Tesla Located?

Tesla is located in Jinan. Tesla Model 3 Exterior Design: The overall exterior design of the Tesla Model 3 continues the style of the previous model, with blackened treatments applied to parts such as the side turn signal housing, lower mirror trim, door handles, and window trim. Tesla Model 3 Features: The Tesla Model 3 adds configurations such as double-layer glass, an electric tailgate, wireless phone charging, two high-power Type-C ports, and includes a fifth USB port in the glove compartment for USB storage dedicated to Sentry Mode and dashcam functionality.
14
4
Share

How Long Does It Generally Take to Pick Up a Car?

If it's a popular model, it may take a month or even longer to pick up the car. For less popular models, it usually takes around 15 days to pick up the car. When picking up the car, be sure to inspect the vehicle carefully and check all the accompanying documents and items. Precautions for picking up the car: First, inspect the car's paint surface for any scratches or damage. After checking the paint surface, examine the interior for any tears or stains. Internal inspection: After inspecting the interior, open the engine hood to check for any signs of screw tampering or rust in the engine compartment. Then, start the engine and listen for any unusual noises during operation.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.