···
Log in / Register

How to Identify a New Car?

4 Answers
LondonLee
07/29/25 3:00pm

The methods to identify a new car are as follows: 1. Check the vehicle's mileage: A two-digit number is considered normal. 2. Inspect the vehicle's production date: Check the production dates of all four tires; examine the production dates of all windows; verify the production date on the vehicle's nameplate. 3. Thoroughly inspect the vehicle: Look for any wear on the seats; check for scratches on both the interior and exterior parts. The significance of a new motor vehicle: It refers to a vehicle that has no previous owner, has not been registered, has no license plates, and lacks any documentation of prior procedures. Once a vehicle is registered or has a registration certificate, it is no longer considered new. Additionally, mileage can be a distinguishing factor, as new cars typically have no mileage recorded.

Was this review help?
4
5
Share
AliceLynn
08/13/25 7:37am

As a car enthusiast, the two things I pay most attention to when evaluating a new car are the mileage and exterior details, as these directly reveal signs of use. New cars typically show between 0 to 100 kilometers on the odometer—anything significantly higher might indicate tampering or prior use. The paint should be smooth and free of scratches; I run my fingers along the edges to check for any signs of repainting. The tire tread should be deep with no wear marks, and the rims should be clean without dents. For the interior, if the plastic protective film is still on the seats, it's likely brand new, and the distinct new-car smell should be strong. I also check the manufacturing date label, usually found on the door frame or in the engine bay—if it's over six months old, it might be considered stock inventory, possibly eligible for a discount but with a shorter warranty. Finally, don't forget to insert the key and start the engine to listen—a new engine should run smoothly without any odd noises. If possible, take the salesperson for a short test drive to check acceleration at low speeds and braking responsiveness.

Was this review help?
19
5
Share
Expand All
McHector
10/11/25 5:56am

I just bought my first car recently, and here's how to tell if it's truly new: Start with the exterior. Check if the plastic protective films on the car body are still intact, and look for dust in the gaps of the hood and trunk—these details reveal whether the car has been untouched. Mileage is crucial; if the salesperson claims it's only been driven a few kilometers but the odometer shows over 50, be cautious. I always open the door to smell the interior—new car plastic has a strong odor, and if it's missing, the car might have been aired out. Also, check the VIN (Vehicle Identification Number) at the bottom left of the windshield; scan it with your phone to verify the production date. On the delivery day, ask the salesperson to issue an electronic invoice and confirm the date is recent to avoid last year's inventory. Remember, always get multiple dealer quotes when buying a car. Reputable dealers will proactively provide proof of the vehicle's origin and warranty terms to ensure you're not paying top dollar for a refurbished model.

Was this review help?
19
5
Share
Expand All
NadiaRose
11/24/25 7:02am

I’m particularly attentive to the freshness of a car and judge a new vehicle mainly through interior and functional checks. First, I get inside the cabin—if the seats lack the original plastic covers, it might mean someone has already sat in them. I inspect the steering wheel and dashboard; brand-new components should have minimal fingerprints, and buttons should show no signs of wear. After starting the engine, the odometer should display fewer than 30 kilometers. I test the air conditioning by turning on the cold air to check if the vents are clean and if cooling is quick. Lifting the hood, I ensure the battery terminals and cables are spotless with no oil stains, and the new engine oil’s clear color confirms it’s fresh from the factory. Before finalizing the purchase, I always schedule a short test drive, taking a bumpy road at low speed to listen for suspension noise—excessive noise could indicate frequent test drives. Additionally, many apps now allow checking a vehicle’s history by entering the VIN to see if there are any accident records—safety comes first.

Was this review help?
19
1
Share
Expand All
More Forum Discussions

How to Perform Emergency Braking for Vehicle Safety?

Methods for performing emergency braking for vehicle safety: 1. For vehicles equipped with an Anti-lock Braking System (ABS): Quickly lift the accelerator pedal and immediately press the brake pedal firmly (maintain pressure), while simultaneously depressing the clutch pedal to bring the car to a rapid stop. 2. For vehicles without an Anti-lock Braking System: Quickly lift the accelerator pedal, press the brake pedal firmly and use intermittent braking (pump the brakes) to prevent wheel lock-up, and depress the clutch at the right moment to prevent the engine from stalling. Emergency braking can cause significant damage to the vehicle and tires, and often leads to loss of control, such as fishtailing, spinning, or skidding, due to uneven braking between the left and right wheels or differences in traction coefficients. This is especially dangerous on slippery surfaces, where it can cause mechanical damage or even accidents.
5
5
Share

What is the reason for the automatic relocking after remote unlocking of the Baojun 730?

Baojun 730 remote unlocking after the automatic relocking is due to the damage of the lock block, which keeps the motor working; the sensor failure leads to the confusion of the control computer information. The solution for the automatic relocking after remote unlocking of the Baojun 730 is to remove the door panel and observe whether any parts of the locking mechanism have fallen off or are damaged. If any parts are found to have fallen off, they can be reinstalled by yourself. If no specific fault point is observed, it should be handed over to professionals for handling. The front suspension of the Baojun 730 uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension. It is equipped with a 1.5T or 1.5L turbocharged engine, paired with a 6-speed manual or CVT continuously variable transmission (simulating 8 gears).
18
2
Share

Can You Keep Driving When the Radiator Overheats?

You should not continue driving when the radiator overheats. Find a safe place to pull over, but do not turn off the engine immediately. Let the engine idle to continue dissipating heat, and open the hood to speed up the cooling process. Do not open the radiator cap to avoid being scalded by hot liquid that may spray out. When the engine is overheated, do not pour water on the engine block or cylinder head, as this can cause the block to crack. After allowing some time for cooling, turn off the engine once the water temperature drops to a suitable level. Reasons for radiator overheating include: 1. Radiator leakage or insufficient coolant, preventing the engine heat from dissipating and the temperature from lowering in time; 2. Deteriorated coolant with reduced boiling point, affecting its cooling performance.
6
1
Share

Is the Accord a manual or automatic transmission car?

The new Honda Accord is an automatic transmission car, with all models equipped with automatic transmissions, specifically E-CVT and CVT continuously variable transmissions. The eighth-generation Accord had a 5MT manual transmission, while the ninth and tenth generations have discontinued the manual option, switching to CVT continuously variable transmissions. This change was made to improve fuel efficiency and reduce the space occupied by the transmission. The large size of the 5MT manual transmission took up significant storage space inside the car, which did not align with the usage habits of younger car owners. Additionally, the CVT automatic transmission is more convenient to operate. The biggest advantage of automatic transmission cars is the elimination of frequent gear shifting, avoiding difficulties in starting. They save time and effort, reducing driving fatigue, and offer high comfort, simplicity, and ease of mastering driving techniques.
1
0
Share

Where is the horn fuse of Sagitar located?

Sagitar's horn fuse is located between the left front door and the left side of the instrument panel. Open the left front door, and you can see a removable panel on the left side of the instrument panel. Remove it to find the fuse. Sagitar is a joint-venture A+ class sedan brand under FAW-Volkswagen. Its predecessor was the fifth-generation Jetta sedan under Volkswagen in Germany, positioned as a "German high-performance sedan". In terms of body dimensions, the Sagitar measures 4753mm in length, 1800mm in width, and 1462mm in height, with a wheelbase of 2731mm. It is equipped with 1.2T and 1.4T turbocharged engines, paired with a 7-speed dual-clutch transmission and a 5-speed manual transmission.
5
5
Share

How to Replace the Battery in an Emgrand Key?

Method to replace the battery in an Emgrand key: 1. There is a button on one side of the key; press the button to pull out the mechanical key. 2. After pulling out the key, you will see the word "open" in English at the front of the key, along with a protruding area. 3. Insert a screwdriver into the protruding area, rotate it clockwise, and pry open the casing to reveal the battery and the key's circuit board. 4. Insert the screwdriver under the battery and gently pry to remove the battery. 5. Place the prepared new battery into position, then reassemble the key in the reverse order. Emgrand car specifications: The body dimensions are 4631mm in length, 1789mm in width, and 1470mm in height; the fuel tank capacity is 50L; the luggage compartment volume is 680L; the drive type is front-wheel drive.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.