How to Identify a Car Engine Model?

What Needs to Be Checked During a New Car Inspection?

The inspection process for a new car at the inspection site is as follows: 1. First, visually inspect the car's paint surface to check for scratches, spots, dents, and wear. Observe the paint under sufficient sunlight to see if there is any color difference. Open the car door and push it from several angles to allow light to shine from different directions, checking if the sheet metal is smooth and if there are any signs of repair. 2. Check the vehicle's nameplate, which is located on the side of the driver's door or in the engine compartment. Pay attention to whether the manufacturing date is too far in the past. If it exceeds six months, the car is likely a stock vehicle or a test drive car. Also, ensure that the information on the nameplate matches the vehicle's certificate of conformity. 3. Inspect the windshield. The numbers represent the most recent production year, and the dots represent the production month. If the dots are on the left side of the number, it indicates production in the first half of the year; subtract the number of black dots from 7 to get the specific year. If the dots are on the right side, it indicates production in the second half of the year; subtract the number of black dots from 13 to get the specific year. If the windshield glass is far from the new car's production date (a year or more), it is likely that the windshield has been replaced. 4. Open the engine hood and check if the engine compartment is clean. If the car has been stored for a long time or used, some areas may show obvious dust or stains. Also, check if the engine oil is sufficient and if the levels of other fluids are within the acceptable range. 5. Open the car door and note whether the door opens and closes smoothly and flexibly, whether the door hinges make any noise, whether the gaps between the door and the front and rear bumpers are consistent, and whether the door can be closed in one step. 6. Check the tire production date. Since tires are purchased separately, their production date will naturally differ from the car's production date, which is not a major concern. However, if the tire production date is significantly older than the car's pickup date, it is worth noting. 7. Check the car's basic functions, such as whether the windows roll up and down normally, whether the air conditioning cools, whether the air vents emit any odors, whether the dashboard functions operate normally, whether the wipers work properly, whether the lights turn on correctly, and whether the sunroof opens and closes smoothly. 8. Test-drive the car. If allowed to start the engine, observe whether the engine idles smoothly, whether the steering wheel vibrates noticeably, whether the front and rear seats vibrate significantly, and whether there is any noticeable noise inside the car.

3

5

Share

How to Retrieve a Reversed Parking Sensor That Got Pushed In?

It is very difficult to pull out the reversed parking sensor from the outside. Even if you manage to pull it out, it might fall back in again shortly after, which would only be a temporary solution. To thoroughly resolve this issue, you first need to remove the rear bumper (the screws are installed at the rear of the chassis), then locate the fallen parking sensor probe and reattach it to its original position. More details are as follows: 1. Overall, the installation process of the reversed parking sensor is very important, as this task involves dealing with relatively complex wiring. 2. If the probe is installed unprofessionally or upside down, it may cause the probe to malfunction, leading not only to the issue of it getting pushed in but also posing certain safety hazards. 3. Therefore, it is best to leave the installation of the reversed parking sensor to professionals.

13

3

Share

What is the fuel consumption of the Atenza 2.5?

The Atenza 2.5 has a fuel consumption of 5.5L per 100 kilometers, which can be attributed to Mazda's unique "Skyactiv Technology." Reasons why the Atenza is popular: 1. Driving Comfort: The "Japanese BMW" handling gives drivers absolute control, with power that responds instantly. 2. Unique Exterior: An exaggerated front grille, smooth waistline, distinctive headlights, and a robust physique. 3. Fuel Efficiency: Many owners may not understand the principle behind its fuel-saving capability, but the stability in fuel consumption significantly saves on fuel costs during city driving.

3

1

Share

What is the Car Center Console?

Car center console is the area that controls comfort and entertainment devices such as air conditioning and audio systems in a vehicle. Below are related introductions about the car center console: 1. The car center console includes the central control door lock system. The driver can use it to control the opening and closing of all vehicle doors and the window lifting system. 2. The central control door lock system mainly has three functions: central control, speed control, and individual control. The driver can control all door locks, and when the driving speed reaches a certain level, the doors automatically lock. For other doors, there are independent switches, allowing individual control of each door. 3. The car center console includes the central control panel, which houses various vehicle controllers such as the audio control panel.

5

0

Share

Where is the memory card of the dash cam located?

The memory card of a dash cam is generally located on the left or right side of the device. Here are the specific details about the dash cam memory card: 1. Automatic overwrite or manual deletion when full: Dash cams have a loop recording feature. When the memory card is full, the dash cam will automatically overwrite the oldest unlocked recordings based on the recording time, eliminating the need for manual deletion to continue recording. However, if too many emergency videos are recorded (which are not overwritten), the memory card may become full over time, requiring manual deletion to continue use. 2. Installation method: To install the dash cam memory card, first locate the memory card slot, usually found on the side of the dash cam main unit. Insert the memory card into the slot, paying attention to the correct orientation.

2

3

Share

What is the replacement interval for the X-Trail transmission fluid?

The replacement interval for the X-Trail transmission fluid is 60,000 kilometers, with a replacement capacity of 8L. Below are the methods for replacing the X-Trail transmission fluid: 1. Gravity replacement: The replacement principle is similar to that of engine oil. After loosening the tightening nut at the bottom of the oil pan, the transmission fluid will automatically flow out from the drain hole. 2. Circulation machine replacement: First, add new transmission fluid to the circulation machine, then connect the transmission's oil circuit interface to the circulation machine. The new fluid pushes out the old fluid under the action of the circulation machine. A single circulation machine replacement requires approximately 10-13 liters of transmission fluid. The replacement time with a circulation machine is about 40-80 minutes. 3. Oil pan removal replacement: This method is a thorough cleaning approach and can clean the oil filter.

17

2

Share

How to Identify a Car Engine Model?

What Needs to Be Checked During a New Car Inspection?

How to Retrieve a Reversed Parking Sensor That Got Pushed In?

What is the fuel consumption of the Atenza 2.5?

What is the Car Center Console?

Where is the memory card of the dash cam located?

What is the replacement interval for the X-Trail transmission fluid?

Which city is represented by the license plate 'Hei S'?

What Causes the Front Wheel of a Motorcycle to Make Noise?

What model is the Lancer in Mitsubishi?

How to Remove the Negative Terminal of a Car Battery?